ページ1に含まれる内容の要旨
6H258-17 and 6H259-17
SmartSwitch 6000 Interface Modules
Installation User’s Guide
9033381
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Only qualified personnel should perform installation procedures. NOTICE Cabletron Systems reserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Cabletron Systems to determine whether any such changes have been made. The hardware, firmware, or software described in this manual is subject to change without notice. IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE FOR ANY INCIDENTAL, INDIRECT,
ページ4に含まれる内容の要旨
FCC NOTICE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against ha
ページ5に含まれる内容の要旨
CABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT IMPORTANT:THIS LICENSE APPLIES FOR USE OF PRODUCT IN THE FOLLOWING GEOGRAPHICAL REGIONS: CANADA MEXICO CENTRAL AMERICA SOUTH AMERICA BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT, CAREFULLY READ THIS LICENSE AGREEMENT. This document is an agreement (“Agreement”) between You, the end user, and Cabletron Systems, Inc. (“Cabletron”) that sets forth your rights and obligations with respect to the Cabletron software program (“Program”) in the pa
ページ6に含まれる内容の要旨
If the Program is exported from the United States pursuant to the License Exception TSR under the U.S. Export Administration Regulations, in addition to the restriction on transfer set forth in Sections 1 or 2 of this Agreement, You agree not to (i) reexport or release the Program, the source code for the Program or technology to a national of a country in Country Groups D:1 or E:2 (Albania, Armenia, Azerbaijan, Belarus, Bulgaria, Cambodia, Cuba, Estonia, Georgia, Iraq, Kazakhstan, Kyrgyzsta
ページ7に含まれる内容の要旨
CABLETRON SYSTEMS SALES AND SERVICE, INC. PROGRAM LICENSE AGREEMENT IMPORTANT: THIS LICENSE APPLIES FOR USE OF PRODUCT IN THE UNITED STATES OF AMERICA AND BY UNITED STATES OF AMERICA GOVERNMENT END USERS. BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT, CAREFULLY READ THIS LICENSE AGREEMENT. This document is an agreement (“Agreement”) between You, the end user, and Cabletron Systems Sales and Service, Inc. (“Cabletron”) that sets forth your rights and obligations with respect to the Cabletro
ページ8に含まれる内容の要旨
5. UNITED STATES GOVERNMENT RESTRICTED RIGHTS. The enclosed Product (i) was developed solely at private expense; (ii) contains “restricted computer software” submitted with restricted rights in accordance with section 52.227-19 (a) through (d) of the Commercial Computer Software-Restricted Rights Clause and its successors, and (iii) in all respects is proprietary data belonging to Cabletron and/or its suppliers. For Department of Defense units, the Product is considered commercial computer s
ページ9に含まれる内容の要旨
CABLETRON SYSTEMS LIMITED PROGRAM LICENSE AGREEMENT IMPORTANT: THIS LICENSE APPLIES FOR THE USE OF THE PRODUCT IN THE FOLLOWING GEOGRAPHICAL REGIONS: EUROPE MIDDLE EAST AFRICA ASIA AUSTRALIA PACIFIC RIM BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT, CAREFULLY READ THIS LICENSE AGREEMENT. This document is an agreement (“Agreement”) between You, the end user, and Cabletron Systems Limited (“Cabletron”) that sets forth your rights and obligations with respect to the Cabletron software program
ページ10に含まれる内容の要旨
If the Program is exported from the United States pursuant to the License Exception TSR under the U.S. Export Administration Regulations, in addition to the restriction on transfer set forth in Sections 1 or 2 of this Agreement, You agree not to (i) reexport or release the Program, the source code for the Program or technology to a national of a country in Country Groups D:1 or E:2 (Albania, Armenia, Azerbaijan, Belarus, Bulgaria, Cambodia, Cuba, Estonia, Georgia, Iraq, Kazakhstan, Kyrgyzst
ページ11に含まれる内容の要旨
SAFETY INFORMATION CLASS 1 LASER TRANSCEIVERS THE GPIM-01 AND GPIM-09 GIGABIT ETHERNET MODULES USE CLASS 1 LASER TRANSCEIVERS. READ THE FOLLOWING SAFETY INFORMATION BEFORE INSTALLING OR OPERATING THESE MODULES. The Class 1 laser transceivers use an optical feedback loop to maintain Class 1 operation limits. This control loop eliminates the need for maintenance checks or adjustments. The output is factory set, and does not allow any user adjustment. Class 1 Laser transceivers comply with the
ページ12に含まれる内容の要旨
DECLARATION OF CONFORMITY Application of Council Directive(s): 89/336/EEC 73/23/EEC Manufacturer’s Name: Cabletron Systems, Inc. Manufacturer’s Address: 35 Industrial Way PO Box 5005 Rochester, NH 03867 European Representative Name: Mr. J. Solari European Representative Address: Cabletron Systems Limited Nexus House, Newbury Business Park London Road, Newbury Berkshire RG14 2PZ, England Conformance to Directive(s)/Product Standards: EC Directive 89/336/EEC EC Directive 73/23/EEC EN 55022 EN 5008
ページ13に含まれる内容の要旨
Contents Figures............................................................................................................................ xiii Tables............................................................................................................................. xiv ABOUT THIS GUIDE Using This Guide............................................................................................................xv Structure of This Guide ..................................................
ページ14に含まれる内容の要旨
2 NETWORK REQUIREMENTS 2.1 100BASE-FX Network.....................................................................................2-1 2.1.1 Multimode Fiber Optic Cabling...........................................................2-1 2.1.2 Single Mode Fiber Optic Cabling ....................................................... 2-2 2.2 SmartTrunk...................................................................................................... 2-2 3 INSTALLATION 3.1 Unpacking the SmartSwitch ....
ページ15に含まれる内容の要旨
Figures Figure Page 1-1 The SmartSwitch............................................................................................................. 1-2 3-1 Installing an Interface Module .........................................................................................3-3 3-2 Connecting a Fiber Optic Segment to the SmartSwitch .................................................. 3-5 4-1 LANVIEW LEDs ...........................................................................................
ページ16に含まれる内容の要旨
Tables Table Page 3-1 Contents of SmartSwitch Shipping Container.............................................................. 3-1 4-1 LANVIEW LEDs ........................................................................................................... 4-3 4-2 Fault Identification........................................................................................................4-5 4-3 Power System Troubleshooting ...........................................................................
ページ17に含まれる内容の要旨
About This Guide Welcome to the Cabletron Systems 6H258-17 and 6H259-17 SmartSwitch 6000 Interface Modules User’s Guide. This guide describes the 6H258-17 and 6H259-17 Interface Modules and provides information concerning network requirements, installation and troubleshooting. For information about how to use Local Management to configure and manage the SmartSwitch series, refer to the SmartSwitch Series 6H202, 6H203, 6H252, 6H253, 6H258, 6H259, 6H262, 6E233, and 6E253 Local Management User
ページ18に含まれる内容の要旨
Structure of This Guide STRUCTURE OF THIS GUIDE This guide is organized as follows: This About This Guide preface provides preliminary information that will aid in using this manual, lists technology and user guides that may help the user set up and manage the SmartSwitch, and gives instructions on how to get help from Cabletron Systems. Chapter 1, Introduction, describes the features of the SmartSwitch. Chapter 2, Network Requirements, outlines the network requirements that must be met before
ページ19に含まれる内容の要旨
Related Manuals RELATED MANUALS The following manuals may help the user to setup and manage the SmartSwitch modules: • SmartSwitch Series 6H202, 6H203, 6H252, 6H253, 6H258, 6H259, 6H262, 6E233, and 6E253 Local Management User’s Guide • 6C105 SmartSwitch 6000 Overview and Setup Guide • Ethernet Technology Guide • Cabling Guide • 802.1Q VLAN User’s Guide • SmartTrunk User’s Guide The following manuals, as applicable, may help the user to set up and manage the SmartSwitches: • HSIM-A6DP User’s Gui
ページ20に含まれる内容の要旨
Document Conventions DOCUMENT CONVENTIONS The following conventions are used throughout this document: Note symbol. Calls the reader’s attention to any item of information that may be of NOTE special importance. Tip symbol. Conveys helpful hints concerning procedures or actions. TIP Caution symbol. Contains information essential to avoid damage to the equipment. ! CAUTION Electrical Hazard Warning symbol. Warns against an action that could result in personal injury or death due to an electrica
