Belkin F5U252の取扱説明書

ページ1に含まれる内容の要旨

Technical Support Information
F5U252 USB 2.0 PCI Express Card Installation Guide
Below is a step by step guide for installing the F5U252, and then verifying the card is installed correctly using the
supplied drivers allowing it to function correctly.
Initial Installation
1. Unpack the card and the installation disk, DO NOT install the card into your pc at this time.
2. Insert the installation CD, a Belkin menu should automatically appear. If it does not then click “Start | Run” and
type “X:\a

ページ2に含まれる内容の要旨

Technical Support Information 5. The manual states the USB 2.0 controller should be install as the “Standard Enhanced PCI to USB Host Controller”, this is incorrect as this is a Microsoft driver and not the NEC one provided on the CD. 6. You need to update either the “PCI Class USB 2.0 Enhanced Host Controller” or the Standard one mentioned above to use the correct NEC driver, please follow the steps below. Installing USB 2.0 Driver 1. Right click on the entry for the USB 2.0 controller and se

ページ3に含まれる内容の要旨

Technical Support Information 5. Select “NEC PCI to USB Enhanced Host Controller” and click “Next”. 6. Click “Finish”. The installation is now complete, in the device manager you should see the following. Belkin Ltd Express Business Park Shipton Way Rushden England NN10 6GL | eurosupport@belkin.com | www.belkin.com Page 3