ページ1に含まれる内容の要旨
Wireless Multi-Function
Access Point
A02-AP1-W54
MANUAL
A02-AP1-W54 _ME01
Where solutions begin
ページ2に含まれる内容の要旨
Where solutions begin
ページ3に含まれる内容の要旨
Wireless Multi-Function Access Point INDEX CHAPTER 1: INTRODUCTION 1 1.1 An Overview of the del Wireless Multi-Function Access Point 1 1.2 Package Contents 2 1.3 Wireless Multi-Function Access Point Features 2 1.4 System Requirements 3 1.5 Setup 3 1.6 Location 4 CHAPTER 2: USING WIRELESS ACCESS POINT 5 2.1 Cautions for using the Wireless Access Point 5 2.2 The Front LEDs 6 2.3 The Rear Ports 6 2.4 Cabling 7 CHAPTER 3:
ページ4に含まれる内容の要旨
Wireless Multi-Function Access Point 3.8 Advanced Setting 34 3.9 Security 35 3.10 Tools 36 APPENDIX A: TROUBLESHOOTING 38 A.1 Using LEDs to Diagnose Problems 38 A.1.1 LED Power 38 A.1.2 LED LAN 38 A.1.3 LED WLAN 39 A.2 WEB 39 A.3 Login 39 A.4 FAQ 41 APPENDIX B: TECHNICAL FEATURES 45 APPENDIX C: SUPPORT 46 A02-AP1-W54_ME01 (V1.0 May2006)
ページ5に含まれる内容の要旨
Wireless Multi-Function Access Point Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher. Windows™ 98SE/2000/ME/XP are trademarks of Microsoft® Corp. Pentium is trademark of Intel. All copyright reserved. The Atlantis Land logo i
ページ6に含まれる内容の要旨
Wireless Multi-Function Access Point CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. CE in which Countries where the product may be used freely: Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece, Ireland, Denmark, Luxembourg, Austria, Finland, Sweden, Norway and Iceland. France: ex
ページ7に含まれる内容の要旨
Wireless Multi-Function Access Point 2) This device must accept any interference received, including interference that may cause undesired operation.
ページ8に含まれる内容の要旨
Wireless Multi-Function Access Point CHAPTER 1: Introduction Congratulations on your purchase of this IEEE 802.11g Wireless LAN Access Point. This manual helps to features the innovating wireless technology that can help you build a wireless network easily! This manual contains detailed instructions in operation of this product. Please keep this manual for future reference. With a WLAN (IEEE 802.11g) Access Point, a mobile computer can sh
ページ9に含まれる内容の要旨
Wireless Multi-Function Access Point 1.2 Package Contents Unpack the package and check all the items carefully. If any item contained is damaged or missing, please contact your local dealer as soon as possible. Also, keep the box and packing materials in case you need to ship the unit in the future. The package should contain the following items: Wireless Multi-Function Access Point 2 dBi Antenna CDRom with online manual Quick St
ページ10に含まれる内容の要旨
Wireless Multi-Function Access Point • Firmware Upgrade : the device can be upgraded to the latest firmware through the WEB based GUI. 1.4 System Requirements Before installing the device, your PC should meet the following: Intel® Pentium®III 600Mhz or compatible processor with TCP/IP stack Iinternet Explorer V6.0 on Netscape V6.0 CDRom 1.5 Setup The setup of the Wireless Access Point can be performed using the following ste
ページ11に含まれる内容の要旨
Wireless Multi-Function Access Point 1.6 Location Locate an optimum location for the Wireless LAN Access Point (AP). The best place for your AP is usually the center of your wireless network, with line of sight to all of your mobile stations. Try to place the AP in a position that can best cover your wireless network. Normally, the higher you place the antenna, the better the performance will be. The antenna’s position enhances the receiv
ページ12に含まれる内容の要旨
Wireless Multi-Function Access Point CHAPTER 2: Using Wireless Access Point 2.1 Cautions for using the Wireless Access Point Do not place the Wireless Access Point under high humidity and high temperature. Do not use the same power source for Wireless Access Point with other equipment. Do not open or repair the case yourself. If the Wireless Access Point is too hot, turn off the power immediately and have a qualified serviceman re
ページ13に含まれる内容の要旨
Wireless Multi-Function Access Point 2.2 The Front LEDs The table below shows the LED Indicator of the Wireless Access Point. LED Meaning POWER This indicator lights green when the Access Point receives power. Otherwise, it turns off. The indicator blinking green whiles the wireless LAN activity. WLAN LAN The indicator lights green when the LAN port is connected to a Ethernet network successful. Otherwise, the indicator blinking green
ページ14に含まれる内容の要旨
Wireless Multi-Function Access Point LAN Ethernet port with 10/100Mbps Fast Ethernet connections, connect this port to switch/hub. POWER Connect the Power Adapter DC plug to the AP’s power jack. 2.4 Cabling Connect to the Switch/Hub • Plug in one end of the RJ45 network cable to the Switch/Hub port • Plug in the other end of the RJ45 network cable to the Wireless Access Point Check the installation The LEDs of the Access Point are
ページ15に含まれる内容の要旨
Wireless Multi-Function Access Point CHAPTER 3: Configuration The Wireless Access Point has a Web GUI interface for the configuration. The AP can be configured through the Web Browser. A network manager can manage, control and monitor the AP from the local LAN. This section indicates how to configure the AP to enable its functions. 3.1 Before Configuration This section describes the configuration required by LAN-attached PCs that commu
ページ16に含まれる内容の要旨
Wireless Multi-Function Access Point 3.1.1 Windows 95/98/ME 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible, or the name of any Network Interface Card (NIC) in your PC. 3. Click Properties. 4. Select the IP Address tab. In this page, click the Specify an IP address radio button (EG IP=192.168.1.2 and subn
ページ17に含まれる内容の要旨
Wireless Multi-Function Access Point 3.1.2 Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double- click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the IP Address tab. In this page, click the Specify an IP address radio button (EG IP=192.168.1.2 and subnet Mask=255.255.255.0). A02-AP1-W54
ページ18に含まれる内容の要旨
Wireless Multi-Function Access Point 3.1.3 Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click LAN Area Connection. 3. In the LAN Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select Use the Following IP Address (EG IP=192.168.1.2 and subnet Mask=255.255.255.0). 6. Click “OK”
ページ19に含まれる内容の要旨
Wireless Multi-Function Access Point 3.1.4 Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double- click on Network Connections. 2. Double-click Local Area Connection 3. In the LAN Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Use the following IP address radio buttons (EG IP=192.168.1.2 and subnet Mask=255.255.255.
ページ20に含まれる内容の要旨
Wireless Multi-Function Access Point 3.2 Default Settings Before configuring the Wireless AP through WLAN, make sure that the SSID, Channel and the WEP was set properly. The default setting of the Wireless AP that you will use: User: admin Password: admin IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 Wep Encryption: disable SSSID: default Channel:6 3.2.1 Password When there is a screen needs to enter the Network pa
