ページ1に含まれる内容の要旨
Configuration Guide
Field Verified
Meru Networks WLAN Controllers with
AP100, AP201, AP208
Configuration and Deployment Guide
This document details the specifications for configuring the Meru Networks WLAN controllers
and access points (APs).
Product Summary
Manufacturer: Meru Networks: www.merunetworks.com
Approved product(s): WLAN Controllers Access Points
MC500 AP100
MC1000 AP201
MC3000 AP208
RF technology: Direct-sequence spread spectrum (DS)
Radio: 2.4 – 2.484 GHz
Antenna
ページ2に含まれる内容の要旨
Meru Networks WLAN Controllers with AP100, AP201, AP208 Configuration Guide Field Verified If you encounter difficulties or have questions regarding the configuration process, please contact Avaya Technical Support at 1 800 242-2121 (USA only) or your local authorized Avaya dealer. Deployment Scenarios Wireless IP telephones can be deployed in a Meru Networks WLAN system where the access points are deployed within a subnet or across multiple layer 2 subnets. The following figure shows th
ページ3に含まれる内容の要旨
Meru Networks WLAN Controllers with AP100, AP201, AP208 Configuration Guide Field Verified Deployment Guidelines Virtual Cell Meru Virtual Cell technology allows for zero-handoff as the wireless IP telephones roam through the wireless environment. This dramatically improves the quality and consistency of client roam times. The bi-directional quality of service (QoS) provides a near toll-quality call experience regardless of the handsets’ security context. The Virtual Cell configuration d
ページ4に含まれる内容の要旨
Meru Networks WLAN Controllers with AP100, AP201, AP208 Configuration Guide Field Verified Multiple floor vertical layout, non-interfering channel coverage Push-to-talk feature Push-to-talk (PTT) is a handset communication mechanism supported by the wireless IP telephone system. The mechanism uses multicast data delivery to communicate within the wireless neighborhood. With guaranteed coverage across all access points, push-to-talk often operates on a base rate as low as 1Mbps. Only a s
ページ5に含まれる内容の要旨
Meru Networks WLAN Controllers with AP100, AP201, AP208 Configuration Guide Field Verified Configuring the Meru Networks WLAN Controllers with CLI Version 3.0 includes support for automatic QoS provision of SVP flows and does not require any specific AP settings. Specific parameters are required in the ESSID configuration to support various features of the wireless IP telephone system. For example, in order for the Avaya Voice Priority Processor discovery and push-to-talk features to funct
ページ6に含まれる内容の要旨
Meru Networks WLAN Controllers with AP100, AP201, AP208 Configuration Guide Field Verified Security configuration Meru Networks supports the following 802.11 security mechanisms for the wireless IP telephone system • Open • WEP (64 or 128) • WPA-PSK (WPA Personal) Open For Open (no 802.11 security) use the default security profile provided which has the “allowed-l2-modes clear” set. Static WEP Sample WEP security profile: Security-profile svp_wep allowed-l2-modes wep
ページ7に含まれる内容の要旨
Meru Networks WLAN Controllers with AP100, AP201, AP208 Configuration Guide Field Verified VLAN configuration It is often desirable to separate SVP packets from other data streams once the traffic enters the wired network. In the Meru solution, creating a VLAN entry in the controller and assigning it to the SVP ESSID achieves this. This is an optional configuration component. vlan SVP_VLAN tag 1001 ip address 10.4.0.250 255.255.0.0 ip default-gateway 10.4.0.1 ip d
ページ8に含まれる内容の要旨
Meru Networks WLAN Controllers with AP100, AP201, AP208 Configuration Guide Field Verified ESSID configuration The ESSID used by wireless IP telephones in production is of a similar configuration but would be configured for Virtual Cell and be assigned with the appropriate security profile. It is important to note that when enabling the multicast support (for the server discovery and PTT feature) you must ensure that there is only one ESSID per VLAN otherwise multicast traffic is not pas
ページ9に含まれる内容の要旨
Meru Networks WLAN Controllers with AP100, AP201, AP208 Configuration Guide Field Verified AP configuration Short preamble should be turned off per AP for wireless IP telephones. Under configuration of interface Dot11Radio this should be disabled. Interface Dot11Radio no preamble-short A An AP boot-script for AP configuration is required to support the SVP solution. Create a file, svpconfig.scr, containing the following lines, and copy this to the controller into the
ページ10に含まれる内容の要旨
Meru Networks WLAN Controllers with AP100, AP201, AP208 Configuration Guide Field Verified Wireless IP Telephones Wireless IP telephones use voice over IP (VoIP) technology on IEEE 802.11b-compatible wireless local area networks (WLANs). Access points utilize radio frequencies to transmit signals to and from the wireless IP telephones. Access Point Capacity and Positioning Each site is unique in its AP requirements. Please take the following points into account when determining how many
