Hobie Mirage Inflatablesの取扱説明書

ページ1に含まれる内容の要旨

Congratulations on purchasing the Hobie Sail Kit
for the Hobie inflatable kayaks. Follow these simple
instructions and you’ll be out and sailing in minutes.
K A Y A K I N G
Step 1: Connect
mast sections
together. Thinner
Step 6: Attach sail stays to kayak and
diameter section
adjust tension. Start with side shrouds by
is mast top.
attaching them to each side of the kayak
securing stay hooks to each stainless ring.
Tension stopper knots until mast is straight.
Step 5: Inser

ページ2に含まれる内容の要旨

Trim the Sail Pull in the "mainsheet" until the sail stops WIND "luffing" (the sail will fill with wind and the Sailing Tips wrinkles will disappear). This amount of trim Tacking will work, but for optimum performance you should try to get the "telltales" (the black Tacking a sailboat is the act ribbons attached to the sail) flowing back on of changing the direction of the Sailing with Hobie's patented both sides of the sail. boat from sailing close hauled with MirageDrive Mechanism a