ページ1に含まれる内容の要旨
Prestige 660H Series
ADSL 2/2+ Gateway
Compact Guide
Version 3.40 (QT)
April 2004
ページ2に含まれる内容の要旨
Prestige 660H Series Compact Guide Table of Contents 1 Introducing the Prestige..............................................................................................3 2 Hardware .....................................................................................................................4 2.1 Rear Panel Connections.........................................................................................4 2.2 The Front Panel LEDs ................................................
ページ3に含まれる内容の要旨
Prestige 660H Series Compact Guide 1 Introducing the Prestige The Prestige 660H ADSL 2/2+ Gateway is the ideal all-in-one device for small networks connecting to the Internet via ADSL. Key features of the Prestige include NAT, content filter and firewall. See your User’s Guide for more details on all Prestige features. You should have an Internet account already set up and have been given most of the following information. INTERNET ACCOUNT INFORMATION Your device’s WAN IP Address (if g
ページ4に含まれる内容の要旨
Prestige 660H Series Compact Guide 2 Hardware 2.1 Rear Panel Connections Figure 1 Prestige Rear Panel Connections Table 1 Prestige Rear Panel Description LABEL DESCRIPTION 1. DSL Connect to a telephone jack using the included phone wire. 2. LAN Connect to a computer/external hub using an Ethernet cable. 1..4 3. POWER Connect to a power source using the power adaptor for your region. Use only the included power adaptor. After you’ve made the connections, connect the power adaptor
ページ5に含まれる内容の要旨
Prestige 660H Series Compact Guide Table 1 Prestige Rear Panel Description LABEL DESCRIPTION RESET You only need to use this button if you’ve forgotten the Prestige’s password. It returns the Prestige to the factory defaults (password is 1234, LAN IP address 192.168.1.1 etc.; see your User’s Guide for details). 2.2 The Front Panel LEDs Figure 2 Front Panel Refer to the following table for more detailed LED descriptions. Table 2 Front Panel LED Description LED COLOR STATUS DESCRIPTI
ページ6に含まれる内容の要旨
Prestige 660H Series Compact Guide Table 2 Front Panel LED Description LED COLOR STATUS DESCRIPTION Off The LAN is not connected. DSL/ACT Green Fast The Prestige is sending/receiving non-PPP data. Blinking Slow The Prestige is initializing the DSL line. Blinking On The system is ready, but is not sending/receiving non-PPP data. Amber On The connection to the PPPoE server is up. Blinking The Prestige is sending/receiving PPP data. Off The DSL link is down. 3 Setting Up Your Comp
ページ7に含まれる内容の要旨
Prestige 660H Series Compact Guide 2. The Network window Configuration tab displays a list of installed components. You need a network adapter, the TCP/IP protocol and Client for Microsoft Networks. 3. In the Network window Configuration tab, select your network adapter's TCP/IP entry and click Properties. 4. Click the IP Address tab. -If your IP address is dynamic, select Obtain an IP address automatically. -If you have a static IP address, select Specify an IP address and type y
ページ8に含まれる内容の要旨
Prestige 660H Series Compact Guide 5. Click the DNS Configuration tab. -If you do not know your DNS information, select Disable DNS. -If you know your DNS information, select Enable DNS and type the information in the fields below (you may not need to fill them all in). 6. Click the Gateway tab. -If you do not know your gateway’s IP address, remove previously installed gateways. -If you have a gateway IP address, type it in the New gateway field and click Add. 7. Click OK
ページ9に含まれる内容の要旨
Prestige 660H Series Compact Guide 2. In the Run window, type "winipcfg" and then click OK to open the IP Configuration window. 3. Select your network adapter. You should see your computer's IP address, subnet mask and default gateway. 3.2 Windows 2000/NT/XP 1. In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel. 2. In Windows XP, click Network Connections. In Windows 2000/NT, click Network and Dial-up Connections. 3. Right-click Local A
ページ10に含まれる内容の要旨
Prestige 660H Series Compact Guide 6. Click Advanced. Remove any previously installed gateways in the IP Settings tab and click OK to go back to the Internet Protocol TCP/IP Properties screen. 7. Click OK to close the Internet Protocol (TCP/IP) Properties window. 8. Click OK to close the Local Area Connection Properties window. 3.3 Checking/Updating Your Computer’s IP Address 1. In the computer, click Start, (All) Programs, Accessories and then Command Prompt. 2. In the Comm
ページ11に含まれる内容の要旨
Prestige 660H Series Compact Guide C:\>ping 192.168.1.1 Pinging 192.168.1.1 with 32 bytes of data: Reply from 192.168.1.1: bytes=32 time=10ms TTL=254 Reply from 192.168.1.1: bytes=32 time<10ms TTL=254 Reply from 192.168.1.1: bytes=32 time<10ms TTL=254 Reply from 192.168.1.1: bytes=32 time<10ms TTL=254 Ping statistics for 192.168.1.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 10
ページ12に含まれる内容の要旨
Prestige 660H Series Compact Guide Default user name. Figure 4 Web Configurator: Password Screen Step 3. You should now see the web configurator Site Map screen. Click Wizard Setup to begin a series of screens to configure your Prestige for the first time. Click a link under Advanced Setup to configure advanced Prestige features. Click a link under Maintenance to see Prestige performance statistics, upload firmware and back up, restore or upload a configuration file. Click Logout
ページ13に含まれる内容の要旨
Prestige 660H Series Compact Guide WIZARD Navigation panel LOGOUT Figure 5 Web Configurator: Site Map Screen The Prestige automatically times out after five minutes of inactivity. Simply log back into the Prestige if this happens to you. 4.2 Common Screen Command Buttons The following table shows common command buttons found on many web configurator screens. Back Click Back to return to the previous screen. Apply Click Apply to save your changes back to the Prestige. Reset/Cancel
ページ14に含まれる内容の要旨
Prestige 660H Series Compact Guide From the Mode drop-down list box, select Routing (default) if your ISP allows multiple computers to share an Internet account. Otherwise select Bridge. Select the encapsulation type your ISP uses from the Encapsulation drop-down list box. Choices vary depending on what you select in the Mode field. Select the multiplexing method used by your ISP from the Multiplex drop-down list box. Enter the correct Virtual Path Identifier (VPI) and Vir
ページ15に含まれる内容の要旨
Prestige 660H Series Compact Guide If your ISP provides the name of your PPPoE service provider, enter it in the Service Name field. Enter the user name and password exactly as your ISP assigned them. Select Obtain an IP Address Automatically if you have a dynamic IP address; otherwise select Static IP Address and type your ISP assigned IP address in the text box below. Select Connect on Demand when you don't want the connection up all the time and specify an idle time-out peri
ページ16に含まれる内容の要旨
Prestige 660H Series Compact Guide In the ENET ENCAP Gateway field, enter the gateway IP address given by your ISP. Refer to Figure 7 for other field descriptions. Figure 9 Internet Connection with ENET ENCAP Refer to Figure 7 for field descriptions. The IP Address and Network Address Translation fields are not available for bridge mode. Figure 10 Internet Connection with PPPoA 16
ページ17に含まれる内容の要旨
Prestige 660H Series Compact Guide Step 3. Verify the settings in the screen shown next. To change the LAN information on the Prestige, click Change LAN Configurations. Otherwise click Save Settings to save the configuration and skip to step 5. Figure 11 Wizard Screen 3 Step 4. If you want to change your Prestige LAN settings, click Change LAN Configuration to display the screen as shown next. 17
ページ18に含まれる内容の要旨
Prestige 660H Series Compact Guide Enter the IP address of your Prestige in dotted decimal notation in the LAN IP Address field. For example, 192.168.1.1 (factory default). If you change the Prestige’s LAN IP address, you must use the new IP address if you want to access the web configurator again. Enter a subnet mask in dotted decimal notation in the LAN Subnet Mask field. Figure 12 Wizard: LAN Configuration From the DHCP Server drop-down list box, select ON to allow your Pr
ページ19に含まれる内容の要旨
Prestige 660H Series Compact Guide Figure 13 Wizard Screen 4 4.4 Test Your Internet Connection Launch your web browser and navigate to www.zyxel.com. Internet access is just the beginning. Refer to the User’s Guide for more detailed information on the complete range of Prestige features. If you cannot access the Internet, open the web configurator again to confirm that the Internet settings you configured in the Wizard Setup are correct. 5 Advanced Configuration This section shows
ページ20に含まれる内容の要旨
Prestige 660H Series Compact Guide 1. One-to-One: One-to-one mode maps one local IP address to one global IP address. Note that port numbers do not change for One-to-one NAT mapping type. 2. Many-to-One: Many-to-One mode maps multiple local IP addresses to one global IP address. 3. Many-to-Many Overload: Many-to-Many Overload mode maps multiple local IP addresses to shared global IP addresses. 4. Many-to-Many No Overload: Many-to-Many No Overload mode maps each local IP address to uni
