ページ1に含まれる内容の要旨
OPERATIONS MANUAL
NETWORK AUDIO ADAPTER NX-100
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
TABLE OF CONTENTS
1. OPERATION SCREEN .............................. 2 3. MAKING BROADCASTS .......................... 4
2. MENU ......................................................... 3 4. ERROR MESSAGES (EXAMPLES) .......... 6
ページ2に含まれる内容の要旨
1. OPERATION SCREEN (Operation screen example) (2) (1) (5) (3) (4) (1) Selection Button Selects broadcast locations. (2) Group Button Simultaneously selects two or more Selection buttons. (3) Start Button Starts the broadcast selected with the Selection or Group button. (4) End Button Quits broadcasts. (5) Message Display Area Displays responses to operations or error contents. 2
ページ3に含まれる内容の要旨
2. MENU 2.1. File Exit: Exits the software program in use. 2.2. Setting Button setting: Not used during operation. (Used for settings only. Entry of both system name and password are required to perform the settings.) Unit settings: Not used during operation. (Used for settings only. Entry of both system name and password are required to perform the settings.) 2.3. Help Help: Displays help contents. Version data: Indicates the version number of the software program in use. 3
ページ4に含まれる内容の要旨
3. MAKING BROADCASTS Step 1. Start the NX-100 Operation Program by double-clicking on the operation program's desktop shortcut or the "nx100_control.jar" application created in the program's installed folder. The operation screen is displayed. (Operation screen example) Step 2. Press either the Selection or Group button to select broadcast locations. Multiple locations can be simultaneously selected. Selected buttons are highlighted in white. When the Group button is pressed, all the Selection b
ページ5に含まれる内容の要旨
Step 3. Press the Start button. Connection to the pressed Selection button's programmed NX-100 units begins. If all NX-100 units are connected, the indication "Connection succeed to all designated units.*" is displayed in the message display area, and the corresponding Selection button changes color to orange. * When only a portion of the programmed units is connected, the indication "Connection failure to some designed units." is displayed. NX-100 units that are not connected are displayed i
ページ6に含まれる内容の要旨
4. ERROR MESSAGES (EXAMPLES) Message Points to Check •"OO" connection failure. - Maximum number of connectable Quit operations, and then restart after a PCs exceeded. few minutes. • No start. - Designated unit busy. •"OO" contact output "XX" already ON. •"OO" contact output "XX" turned OFF by other contact or PC. •"OO" connection failure. Contact system management • Connection failure to all designated units. personnel. •"OO" connection failure - Incomplete broadcast. • No broadcast. - Connectio
