ページ1に含まれる内容の要旨
FCC Warning
This equipment has been tested and found to comply with the
regulations for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
it’s not installed and used in accordance with this user’s guide,
may cause harmful interference to radio communi
ページ2に含まれる内容の要旨
Table of Contents INTRODUCTION Thanks for purchasing of the 85Mbps Powerline Ethernet Adapter. This INTRODUCTION .................................................................................. 1 Adapter will allow your Ethernet device to connect to other Ethernet devices ABOUT THE 85MBPS HOMEPLUG 1.0 TURBO TO ETHERNET ADAPTER .. 1 through AC power line. PRODUCT FEATURES .......................................................................... 1 About the 85Mbps Powerline Ethernet
ページ3に含まれる内容の要旨
INSTALLATION Connecting to network The 85Mbps Powerline Ethernet Adapter is designed to be simple and easy You can connect the 85Mbps Powerline Ethernet Adapter directly to PC’s install. network adapter, switch, or any other Ethernet enabled device. Ethernet Port Note: The Ethernet port on the Adapter is supported Auto-MDI/MDIX function, you can use a straight-through or a crossover Ethernet cable when Connect to Ethernet enabled device. connecting to another Ethernet enabled device.
ページ4に含まれる内容の要旨
Configuration Utility Using the Configuration Utility The HomePlug Configuration Utility for Windows OS enables the users to To start the Configuration Utility, double click the icon on the desktop, the identify HomePlug devices on the power line network, measures data rate Configuration Utility will be executed. performance, ensures privacy and performs diagnostics by setting user The Configuration Utility was divided into four tabs, Main, Privacy, defined secure power line networks. D
ページ5に含まれる内容の要旨
The lower panel displays all the HomePlug remote devices, discovered on the dashed between them. current logical network. The total number of remote devices connected on the A confirmation box will appear if the password was entered correctly (Figure same network can be found on top of the remote device panel. The Network 4). If a device was not found, the user will be notified along with the type (Public or Private) is also displayed based on the network status of the suggestions to resol
ページ6に含まれる内容の要旨
Set All Device button Privacy The Privacy screen provides the user with an option to maintain security for The Set All Devices button is used to change the logical network of all their logical network and also to select the devices that has to be included in devices that appear on the Main panel whose Device’s Password had been the network. The appearance is shown in Figure 6. entered for the same logical network. A dialog window will appear to report the success of this operation. For d
ページ7に含まれる内容の要旨
About The Upper panel shows technical data concerning software and hardware present on the host computer which were used to communicate over The About screen shows the software version and Preferences setting. HomePlug on the Power line network. It shall include the following: Preferences Operating System Platform/Version Host Network Name AutoScan function enable or disable. User Name MAC Address of all NICs (Network interface card) connected to the host Iden
ページ8に含まれる内容の要旨
SPECIFICATIONS Limited Warranty HomePlug 1.0 Turbo Standards: IEEE 802.3 Ethernet / IEEE 802.3u Fast Ethernet TRENDnet warrants its products against defects in material and Ethernet: 10/100Mbps (Link speed) Data Speed: workmanship, under normal use and service, for the following lengths HomePlug: Up to 85Mbps of time from the date of purchase. Frequency band 4.5MHz ~ 21MHz Modulation OFDM Powerline Three years Technology Modulation Schemes QAM 16/64/256, DBPSK, ROBO If
ページ9に含まれる内容の要旨
within the applicable warranty period for a Return Material Authorization LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY (RMA) number, accompanied by a copy of the dated proof of the LAW TRENDNET ALSO EXCLUDES FOR ITSELF AND ITS purchase. Products returned to TRENDnet must be pre-authorized by SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TRENDnet with RMA number marked on the outside of the package, TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, and sent prepaid, insured and
ページ10に含まれる内容の要旨
16
