ページ1に含まれる内容の要旨
HS-6038
Socket 370 133MHz FSB
Industrial Single Board Computer
•Full-size•All-in-One•CompactFlash•
•133MHz FSB•CRT•Dual LAN•Audio•
•ATA/33/66/100•RS-232/422/485•PC/104•
•IrDA•USB•DOC•WDT•H/W Monitor•
•PICMG Bus Industrial Single Board Computer•
ページ2に含まれる内容の要旨
Copyright Disclaimers The accuracy of contents in this manual has passed thorough checking and review before publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for any infringements of patents or other rights resulting from its use. The manufacturer will not be responsible for any direct, indirect, special, incidental or consequential damages arising from the use of this product or documentation, even if advised of the possibility of such damage(s). This
ページ3に含まれる内容の要旨
Table of Contents Chapter 1 General Description…………………...1 1.1 Major Features.................................................................. 2 1.2 Specifications ................................................................... 3 1.3 Board Dimensions............................................................ 4 Chapter 2 Unpacking……………………………..5 2.1 Opening the Delivery Package........................................ 5 2.2 Inspection....................................................
ページ4に含まれる内容の要旨
Chapter 4 AMI BIOS Setup……………………..27 4.1 Starting Setup................................................................. 27 4.2 Using Setup..................................................................... 28 4.3 Main Menu....................................................................... 29 4.4 Standard CMOS Setup................................................... 30 4.5 Advanced CMOS Setup ................................................. 31 4.6 Advanced Chipset Setup..........
ページ5に含まれる内容の要旨
Safety Instructions Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging chips from electrostatic discharge, observe the following precautions: Do not remove boards or integrated circuits from their anti-static packaging until you are ready to install them. Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This helps to discharge any static electricity on your body. Wear a w
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
Chapter 1 General Description ® The HS-6038 is a 133MHz FSB Intel 82815/82801BA chipset-based board designed for PICMG Bus Celeron™/Coppermine™/Tualatin™ 800MHz~1.2GHz CPU compatibility. These features combine and make the HS-6038 an ideal all-in-one industrial single board computer. Additional features include an enhanced I/O with CompactFlash, VGA, dual LAN, audio, and two COM interfaces. Its onboard ATA/33/66/100 to connected IDE drive interface architecture allows the HS-6038 to s
ページ8に含まれる内容の要旨
Additional onboard connectors include an advanced USB and IrDA ports providing faster data transmission, and a dual RJ-45 connector for 10/100 Based Ethernet use. To ensure the reliability in an unmanned or standalone system, the Watchdog Timer (WDT) onboard HS-6038 is designed with pure hardware that does not need the arithmetical functions of a real-time clock chip. If any program causes unexpected halts to the system, the onboard Watchdog Timer (WDT) will automatically reset the CPU or
ページ9に含まれる内容の要旨
1.2 Specifications CPU: Socket 370 for Intel Celeron /Coppermine /Tualatin 800MHz ~1.2GHz CPU Bus Interface: PICMG Bus Memory: Two DIMM sockets supporting up to 512MB ® Chipset: Intel 82815/82801BA I/O Chipset: Winbond W83627 CompactFlash : One, IDE interface adapter (optional) VGA: Intel 82815 supporting CRT display up to 1280 x 1024 at 16 colors ® ® LAN: Intel 82559 and Intel ICHII 10/100 Based LAN Audio: AC97 3D audio controller IDE: Four IDE disk drives supporti
ページ10に含まれる内容の要旨
1.3 Board Dimensions 4
ページ11に含まれる内容の要旨
Chapter 2 Unpacking 2.1 Opening the Delivery Package The HS-6038 is packed in an anti-static bag. The board has components that are easily damaged by static electricity. Do not remove the anti-static wrapping until proper precautions have been taken. Safety Instructions in front of this manual describe anti-static precautions and procedures. 2.2 Inspection After unpacking the board, place it on a raised surface and carefully inspect the board for any damage that might have occurred du
ページ12に含まれる内容の要旨
It is recommended that you keep all the parts of the delivery package intact and store them in a safe/dry place for any unforeseen event requiring the return shipment of the product. In case you discover any missing and/or damaged items from the list of items, please contact your dealer immediately. 6
ページ13に含まれる内容の要旨
Chapter 3 Hardware Installation This chapter provides the information on how to install the hardware using the HS-6038. This chapter also contains information related to jumper settings of switch, watchdog timer, and the DiskOnChip address selection etc. 3.1 Before Installation After confirming your package contents, you are now ready to install your hardware. The following are important reminders and steps to take before you begin with your installation process. 1. Make sure that al
ページ14に含まれる内容の要旨
3.2 Board Layout 8
ページ15に含まれる内容の要旨
3.3 Jumper List Jumper Definition Setting Page JP2 Host Bus Clock Rate Select: 133MHz FSB Open 10 JP3 Clear CMOS: Normal Operation Short 1-215 JP4 LAN2 Enabled/Disabled Select: Enabled Short 1-2 14 JP5 WDT Active Type Setting: System Reset Short 2-3 20 JP6 DiskOnChip Address Select: 0D000H~ Short 3-4 25 0D1FFH JP7 Short 1-2 25 JP8 / JP9 / COM 2 Use RS-232 or RS-422/485 Select: 12 Short 2-3 JP11 / JP12 RS-232 3.4 Connector List Connector Definition Page ATX1 20-pin ATX Power In Conne
ページ16に含まれる内容の要旨
Connector Definition Page PC1 / PC2 PC/104 Bus 64-pin/40-pin Connectors 22 USB1 External USB Connector 15 USB2/USB3 Internal USB Connectors 15 RT1/RT2 Power Sensing Connectors 18 VGA1 15-pin VGA Connector 10 3.5 Configuring the CPU JP2 is used to set the Host Bus Clock Rate. The setting of internal Host Bus Clock Rate is for defining the operating clock base rate of the internal bus of core logic. JP2: Host Bus Clock Rate Select 1 Description Setting 66/100MHz FSB Short 133MHz FSB
ページ17に含まれる内容の要旨
2 CN9: I C Bus Connector PIN Description 123 1 SMBDATA 2 SMBCLK 3 GND 3.8 IDE Drive Connector IDE1/IDE2 are standard 40-pin connector daisy-chain driver connectors serving the PCI E-IDE drive provisions onboard the HS-6038. A maximum of four IDE drives can be connected to the HS-6038 via IDE1/IDE2. IDE1/IDE2: Primary/Secondary IDE Connectors PIN Description PIN Description 1 RESET 2 GND 3 DATA 7 4 DATA 8 5 DATA 6 6 DATA 9 7 DATA 5 8 DATA 10 9 DATA 4 10 DATA 11 11 DATA 3 12 D
ページ18に含まれる内容の要旨
3.9 Floppy Disk Drive Connector The HS-6038 uses a standard 34-pin header connector, FDC1, for floppy disk drive connection. A total of two floppy drives may be connected to FDC1 at any given time. FDC1: Floppy Connector PIN Description PIN Description 1 GND 2 RWC- 3 GND 4 N/C 5 GND 6 DS1- 7 GND 8 Index# 9 GND 10 Motor Enable A# 11 GND 12 Drive Select B# 13 GND 14 Drive Select A# 15 GND 16 Motor Enable B# 17 GND 18 Direction# 19 GND 20 Step# 21 GND 22 WD- 23 GND 24 WE- 25 GND 26 T
ページ19に含まれる内容の要旨
CN12: RS-422/485 Connector (5x2 header) PIN Descriptio PIN Description n 24 68 10 1 TX- 2 TX+ 3 RX+ 4 RX- 13 57 9 5 GND 6 RTS- 7 RTS+ 8 CTS+ 9 CTS- 10 N/C JP8/JP9/JP11/JP12: COM2 Use RS-232 or RS-422/485 Select Options Settings 13 RS-232 (default) Short 2-3 RS-422/485 Short 1-2 3.11 Parallel Connector LPT1 is a standard 26-pin flat cable connector designed to accommodate parallel port connection onboard the HS-6038. LPT1: Parallel Connector PIN Description PIN Descriptio
ページ20に含まれる内容の要旨
3.12 Ethernet Connector The HS-6038 provides one dual RJ-45 10/100 Based LAN interface connectors. Please refer to the following table for their identical pin assignments. LAN1: Dual RJ-45 Connector PIN Description PIN Description 1 1TX+ 2 1TX- 3 1RX+ 4 1R/C GND 5 1R/C GND 6 1RX- 7 1R/C GND 8 1R/C GND 9 2TX+ 10 2TX- 11 2RX+ 12 2R/C GND 13 2R/C GND 14 2RX- 15 2R/C GND 16 2R/C GND 1 7 9 15 2 8 10 16 JP4: LAN2 Enable/Disable Select Options Settings 12 3 Enabled (default) Short 1-2
