ページ1に含まれる内容の要旨
OWNER’S MANUAL
Whistler Bluetooth Headsets
The Whistler Group Inc. - Corporate Offices
3604 NW Frontage Road
Models:
Bentonville, AR 72712
BT2200 (Class2/CH2)
1-800-531-0004
BT2300 (Class2/CH2)
BT3200 (Class1/CH2)
The Whistler Group Inc. - Customer Return Center
BT3300 (Class1/CH2)
551 North 13th Street
Rogers, AR 72756
www.whistlergroup.com
P/N 303000 © 2009 The Whistler Group Inc.
ページ2に含まれる内容の要旨
Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3 Pairing to an Audio Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21-22 ® What is Bluetooth ? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Connecting headset with audio device Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 Operating and dis
ページ3に含まれる内容の要旨
Introduction Introduction Dear Whistler Owner, All intellectual property rights and copyrights for the manual, hardware, and related software are protected by applicable law. This manual may not be copied, reprinted, or ® reproduced in any manner without the written permission of the Whistler Group. Thank you for purchasing a Bluetooth Headset from the Whistler Group. If you have questions concerning the operation of this Whistler product please call: Note: Your warranty period begins at the t
ページ4に含まれる内容の要旨
What is Bluetooth? Safety Instructions Bluetooth is a wireless protocol utilizing short-range communications technology facilitating Please read the “Safety Rules” carefully before using this product. Following the safety rules data transmissions over short distances from fixed and/or mobile devices, creating wireless prevents users from damages related with the misuse of the product. It is very important to personal area networks (PANs). follow these safety rules. We state “Caution” and “Wa
ページ5に含まれる内容の要旨
Safety Instructions Features - Components • Disconnect charger when complete. • When cleaning the exterior, switch off Main Unit Speakers Microphone Accessories the unit and wipe it with a dry cloth • Do not use damaged cables, jack, or loose only. — A wet cloth may cause and socket. electronic shock. • Do not place the product in an area which the • Unplug the product when not using it temperature could suddenly increase. Microphone A for a long time. BT2300/3300 Bracket B Bracket A • Ke
ページ6に含まれる内容の要旨
Match Unit to Helmet Type Storing and Recharging Headset Storing 1) Full Face Helment - 2) Flip-up Helment - When the unit is not in use please consider the following steps. W/microphone A W/microphone B 1). When not using the headset, please store it in a dry place and switch it off to save battery power. BT2300/3300 2). Do not place it in direct sunlight or extremely hot temperatures. 3). Store all accessories in a dry place. Recharging Headset 3) Open Face Helment The Bluetooth headset has a
ページ7に含まれる内容の要旨
Storing and Recharging Headset Storing and Recharging Headset Recharging Headset - (continued) Battery Charge / Usage Time 2). Connect the headset to the charger as described. Please make sure that the charger plug is inserted correctly into the headset. Usage Time Charge Model Time Stand-by Speaking/music/intercom BT2200/2300 ~180h ~14h ~ 3h BT3200/3300 ~90h ~7h 3). The red LED is illuminated during the charging process. When the headset is fully charged, the red LED turns off. Disconnect
ページ8に含まれる内容の要旨
Installing Headset Installation of Speakers and Microphone Please note: Equipment will vary due to helmet type. Select mounting method based on helmet type. 1) Using Bracket A (for attaching to helmet)incl. 3M adhesive tape. Recommened to be placed on the left hand side 1). Please connect the headset cable (USB plug) with the USB socket on the module. 2). Connect the microphone to the white plug on the Double sided head set cable (BT2300/3300 only). adhesive tape I. Please clean the II. Please
ページ9に含まれる内容の要旨
Button Callouts Button Functions Key Function ACTIVATE/DEACTIVATE CHANNEL 2 [+] KEY INCREASE VOLUME ACTIVATE/DEACTIVATE CHANNEL 1 [-] KEY DECREASE VOLUME PAIRING CHANNEL 2 AS MASTER MASTER KEY [M] TALK KEY [T] REDIALING, ACCEPT CALL RESET RESET OF ALL FUNCTIONS, ALL CHANNELS OFF TEMPORARY MUTING OF CHANNEL 1 & 2 MUTE KEY The volume adjustment will be acknowledged as tones through the speakers. 14 15
ページ10に含まれる内容の要旨
Basic Functions and Operation Pairing to a Cell Phone Normally, you can connect every Bluetooth cell phone to the headset. However, Function Key/Action/LED Signal depending on the phone type, some functions cannot be operated through the headset. 4 Tones Activate channel 1 Press the [-’] key for 4 seconds until the red LED flashes. This includes the automatic music rendering after a call, redialing, or other functions. Press the [+] key for 3 seconds until the green LED flashes. If the Therefor
ページ11に含まれる内容の要旨
Pairing to a Cell Phone Pairing to a Cell Phone Connecting the headset with cell phone. Play music from mobile phone 1). Activate the Bluetooth function of you phone and start searching for other phones The Bluetooth headsets have Bluetooth Version 2.0 and the A2DP protocol. With this in our environment. If necessary, make use of your mobile phone manual. Please protocol, you can hear music in stereo quality. To hear music in stereo quality from your make sure that all other Bluetooth device
ページ12に含まれる内容の要旨
Pairing to a Cell Phone Pairing to an Audio Device Receiving a call while listening to music Connection headset with audio device 1). While listening to music from your cell phone, you can receive calls at any time. In addition to your cell phone, you can also connect a Bluetooth audio device on channel 1 at the same time (e.g. GPS system, MP3 player, BTA (Bluetooth Adapter). Before starting 2). If you receive a call, the music will be muted and you will hear the ringing of the the pairing, ple
ページ13に含まれる内容の要旨
Pairing to an Audio Device Intercom Function Operating and disconnecting the audio device Headset Distance 1). You can adjust the volume of the audio device with the [+] & [-] keys of the The BT2200/2300 is intended for communications between the driver and passenger. You headset. will need one headset for each person. The BT3200/330 is intended for communications between the driver of one motorcycle to the driver of another. You will need one headset 2). You can start and stop the music with
ページ14に含まれる内容の要旨
Intercom Function Intercom Function Vox Function (continued) Pairing of headsets on channel 2 4). When activating the VOX after is has turned off, a delay of 3 seconds is required Before you start to pair the headsets on channel 2, please switch off channel 1 as well as before resuming conversation. The activation of the VOX will provide a sound in all other Bluetooth devices in your environment. the headset. 5). Depending on the helmet type and motorcycle, ambient noises could activate the 1
ページ15に含まれる内容の要旨
Intercom Function Intercom Function Cell phone and intercom Music and Intercom 1). Please connect the phone to the headset on channel 1 as described. 1). Connect the audio device (MP3 player, iPOD, etc.) with channel 1 of the headset as described. 2). Switch off channel 1 again and activate channel 2 as described. 2). If the headsets have not been paired, switch off channel 1 and active the intercom 3). Switch on both channels again. on channel 2 as described (See pairing on channel 2). 4). You
ページ16に含まれる内容の要旨
Intercom Function General Information Disconnect headset from music / cell phone Static Noise 1). Switch off the headset on channel 1 as described. In some cases, there could appear static noise for a short time but this does not influence the general quality of the Bluetooth headset. 2). Switch off your cell phone / MP3 player. Some causes: 3). As soon as you switch on the headset and the last connected device, the devices 1). Headset not paired with proper device. will automatically connecte
ページ17に含まれる内容の要旨
Specifications Troubleshooting Your Whistler headset is expertly engineered and designed to exacting quality standards to provide you with reliable, trouble-free operation. If your unit has been correctly installed Technical Data BT2200/2300 BT3200/3300 following the guidelines in this manual, but is not operating optimally, please refer to the troubleshooting guide below. Bluetooth version Version 2.0 Problem: Bluetooth Headset cannot be switched on Frequency 2.4 GHz ISM Band (2.4 – 2.4835 GHz)
ページ18に含まれる内容の要旨
Troubleshooting FCC Information FCC ID: U6CCAMOS-BTS200 Problem: The voice over the microphone is too low. Please make sure that the boom microphone is correctly placed close to your mouth. The FCC ID: U6CCAMOS-BTS300 white marking has to be in the direction of your mouth (BT2200/3200). In addition, the microphone sensitivity can be adjusted as required (page 24). This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not ca
ページ19に含まれる内容の要旨
FCC Information Warranty Information If this equipment does cause harmful interference to radio or television reception, which Consumer Warranty can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: This Whistler product is warranted to the original purchaser for a period of one year from the date -- Reorient or relocate the receiving antenna. of original purchase against all defects in material
ページ20に含まれる内容の要旨
Warranty Information Warranty Information Service Under Warranty (continued) Service Under Warranty (continued) Due to the specialized equipment necessary for testing this product, there are no authorized service Be certain your unit is returned with its serial number. For reference, please write your stations for Whistler products other than Whistler. unit serial number in the following space: _____________. When returning a unit for service under warranty, please follow these instructions: U
