ページ1に含まれる内容の要旨
Bluetooth Headset
with OLED Display
ET3000
User Guide
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
USER GUIDE Contents Overview ..........................................................................................................................................................2 Getting Started..................................................................................................................................................2 Unpacking ezTalker digital ..........................................................................................................................2
ページ4に含まれる内容の要旨
Overview ® ezTalker™ digital by Tekkeon is a Bluetooth headset with a unique OLED digital display that lets you cut loose from your Bluetooth mobile phone. With advanced features like stored number redial, last number redial and voice dialing, you can use the headset to make and receive calls without every touching your mobile phone. You can even access and dial from your mobile phone book for some mobile phones. While using your ezTalker digital headset, you can store your mobile phone in your
ページ5に含まれる内容の要旨
Getting to Know ezTalker digital VOLUME UP Button VOLUME DOWN Button TALK Button Increases the speaker volume, Used to turn headset on/off, Decreases the speaker volume, initiates mutes/unmutes the microphone, pair, and make/receive calls last number redial and call waiting, and and enables scrolling through enables scrolling through phone book stored numbers Charging LED Indicates when headset is being charged Earhook Houses battery, and Charging Jack can be positioned to be Input for power
ページ6に含まれる内容の要旨
Setting Up ezTalker digital Before using ezTalker digital, you must: • Charge ezTalker digital • Pair ezTalker digital to your mobile phone • Adjust ezTalker digital to your ear preference Directions for each of these activities are provided in the following three sections. Once these steps are completed, you will be ready to use ezTalker digital! Charging ezTalker digital Before using ezTalker digital, you must charge the headset for a minimum of two hours. When fully charged, the battery pro
ページ7に含まれる内容の要旨
Pairing ezTalker digital to Your Mobile Phone Pairing is the process of linking the headset with your Bluetooth mobile phone or other Bluetooth device that supports a headset and/or handsfree profile. Before using ezTalker digital with your mobile phone you must pair the devices. After this process is complete, you can use the headset with your paired mobile phone. You can pair ezTalker digital with up to seven Bluetooth devices. Once each device is paired with the headset, you must disconnect
ページ8に含まれる内容の要旨
To Cancel Pairing Mode While you are in pairing mode, you can cancel the pairing process and turn off the headset. 1. While in pairing mode, press and hold the TALK button approximately three seconds until “Off” appears on the display and the headset turns off. Wearing ezTalker digital ezTalker digital is designed to fit comfortably in your ear. The earhook can be positioned to be worn on the right or left ear. The battery is housed in the earhook, so the earhook must be connected to use the h
ページ9に含まれる内容の要旨
Using ezTalker digital Powering ezTalker digital To Turn On the Headset 1. Press and hold the TALK button approximately four seconds until “On”, then “Standby” appears on the display, or until you hear the ON tone. The headset turns on and is placed in standby mode, ready to make and receive calls. Note: To conserve power, the display will turn off after being idle for 18 seconds. To view the display, simply press any button. To Turn Off the Headset 1. With both the headset and the display
ページ10に含まれる内容の要旨
Icons 7148321266 Caller ID Caller Name Tekkeon Ring... Status The icons in the first two positions will change according to the mode. Following is a description of the icons: Headset has no audio connection/Headset is in talk mode Headset is in standby mode/Headset is in talk mode Volume level Battery level 8
ページ11に含まれる内容の要旨
Making Calls You can make calls from your mobile phone, or directly from ezTalker digital using the last number redial feature, voice dialing commands, the stored number redial feature, or by accessing your mobile phone book from the headset (if these features are supported by your mobile phone). To Make Calls from Your Mobile Phone 1. Dial the number from your mobile phone. The call is automatically connected to your headset. To Make Calls Using Last Number Redial (if supported by your mobile
ページ12に含まれる内容の要旨
To Make Calls Using Stored Number Redial 1. With the headset off, press the VOLUME UP button to turn on the display and put the headset in stored number browse mode. The display will turn on. 2. Press the VOLUME UP button (forward) or VOLUME DOWN button (backward) to scroll through the numbers stored in your mobile phone until you reach the desired number. 3. Press the TALK button. The call is automatically connected to your headset. To Make Calls Using Your Mobile Phone Book (if supported by yo
ページ13に含まれる内容の要旨
Receiving Calls When you receive a call on your mobile phone, you will hear the mobile phone ring before you hear the ring tone through your headset as there is a small delay before the headset recognizes the incoming call. If you do not wish to answer the call, you can use the Call Reject feature to reject the call and send the caller to voice mail (if available). If the Call Waiting feature is supported by your phone, you can answer an incoming call while you are connected on another call. In
ページ14に含まれる内容の要旨
Ending Calls 1. When you have finished your call, press the headset TALK button. The call will be disconnected. Transferring Calls You can transfer calls from your mobile phone to your headset, and from your headset to your mobile phone. To Transfer Calls from Your Mobile Phone to the Headset 1. Press any button on the headset to turn on the display (if off). 2. With the call connected to your mobile phone, press the TALK button on your headset. The call will be transferred to your headset. To
ページ15に含まれる内容の要旨
Browsing the Phone Book Directly from your headset, you can browse and dial numbers stored on your mobile, if supported by your mobile phone. NOTE: Phone numbers stored on the phone (not on the SIM card) are displayed in the order they were stored on your mobile phone, not in alphabetical order. Some mobile phones only display the first number stored for a contact (such as home), and will not display all the numbers for that contact. This feature is supported by many phones. For a list of phone
ページ16に含まれる内容の要旨
To Enable Caller ID/Name 1. With caller ID disabled, simultaneously press the VOLUME UP and VOLUME DOWN buttons. “ID enabled” will appear on the display. Adjusting the Volume The volume can be adjusted using the volume controls on ezTalker digital or your mobile phone. To Increase the Volume 1. While in talk mode, press and release the VOLUME UP button. Repeat until you reach the desired level. The volume level icon will change accordingly. To Decrease the Volume 1. While in talk mode, p
ページ17に含まれる内容の要旨
Visual and Audible Indicators ezTalker digital uses visual and audible indicators to provide the status of the headset. For visual indicators, the headset provides caller ID, display icons to indicate headset state, connection status, and volume and battery level, and text and a blue LED that provide operation status. The icons are described in Understanding the Display, and the text and LED are described in this section. Audible indication of requested actions is provided through tones heard
ページ18に含まれる内容の要旨
Visual and Audible Indicators (continued) LED Status Indicators Status Indicates Flashes at two-second intervals Headset is in standby mode, ready to make and receive calls. Is off Headset is off. Audible Indicators Tone Indicates Double beep, increasing in pitch Headset has been turned on. Double beep, decreasing in pitch Headset is about to turn off. A beep every 32 seconds Battery is low. Double chime, followed by Headset has been put into pairing mode. low beep Beeps every four seconds H
ページ19に含まれる内容の要旨
Troubleshooting Issue Solution When you initiate the Bluetooth Verify that ezTalker digital is placed in pairing mode (Pairing is shown on the device pairing feature on your mobile display). If not, place the headset in pairing mode. phone, your phone cannot find ezTalker digital. Your ezTalker digital headset is not Ensure that the headset is on and charged, and that you have paired the communicating with your mobile headset with your Bluetooth mobile phone. (ezTalker digital will not work wit
ページ20に含まれる内容の要旨
Troubleshooting (continued) Issue Solution When you receive a call on your 1. Ensure that your ezTalker digital headset is charged and turned on. mobile phone, the call is not 2. Ensure that your Bluetooth mobile phone is set to Bluetooth mode, and that automatically connected to ezTalker ezTalker digital (BTHS) has been selected as the connected Bluetooth digital after you press the TALK device. (This is important as most Bluetooth phones are designed to pair button. with more than one Blueto
