ページ1に含まれる内容の要旨
EZ Connect Ethernet/
USB Cable Modem
Ethernet & USB Cable Modem -
DOCSIS 1.1
High-speed Internet access over a cable network system
Data rate up to 40 Mbps downstream, 10 Mbps
upstream
Always-on digital connection
DOCSIS 1.1 certified
Supports all Windows systems through its Ethernet
connection
USB support for Windows 98, ME, 2000, XP
Built-in support for SNMP Network Management
Supports USB and Ethernet concurrently
Supports up to 17 users (if allowed by service provider)
User Guid
ページ2に含まれる内容の要旨
EZ Connect Ethernet/USB Cable Modem From SMC’s EZ line of award-winning workgroup LAN solutions October 2002 38 Tesla Irvine, CA 92618 Phone: (949) 679-8000
ページ3に含まれる内容の要旨
Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice. Copyright © 2002 by SMC Networks, Inc. 38 Tesla Irvine, CA 92618 All
ページ4に含まれる内容の要旨
LIMITED WARRANTY Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller. SMC may, at its own discretion, repair or replace any product not operating as warranted with a similar or functionally equivalent product, during the applicable
ページ5に含まれる内容の要旨
LIMITED WARRANTY WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SMC NEITHER ASSUME
ページ6に含まれる内容の要旨
COMPLIANCES FCC - Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no gua
ページ7に含まれる内容の要旨
COMPLIANCES This information technology equipment complies with the requirements of the Council Directive 89/336/EEC on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility and 73/23/EEC for electrical equipment used within certain voltage limits and the Amendment Directive 93/68/EEC. For the evaluation of the compliance with these Directives, the following standards were applied: RFI Emission: Limit class B according to EN 55022:1998 Limit class A
ページ8に含まれる内容の要旨
TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hardware Description . . . . . . . . . . . . . . . . . . . . . . . .
ページ9に含まれる内容の要旨
INTRODUCTION The EZ Connect Ethernet/USB Cable Modem (SMC8011CM) is fully compliant with the Data Over Cable Service Interface Specification (DOCSIS 1.1) thus ensuring compatibility with the majority of cable Internet providers. It provides high-speed Internet access over the same cable network system that brings cable TV service to the home. The SMC8011CM modem provides DOCSIS 1.1 QoS support that allows different kinds of IP traffic to be directed into different service flows, with high
ページ10に含まれる内容の要旨
INTRODUCTION Key Features High-speed Internet access over a cable network system Data rate of up to 10 Mbps upstream and 40 Mbps downstream Always-on digital connection eliminates dial-up delays and provides transparent Internet access when initiating a network request Compatibility with cable suppliers is ensured by DOCSIS 1.1 compliance USB support for Windows 98/ME/2000/XP systems Supports USB and Ethernet concurrently Supports up to 17 users (if allowed by your service provi
ページ11に含まれる内容の要旨
PACKAGE CONTENTS Package Contents After unpacking the EZ Connect Cable Modem, check the contents of the box to be sure you have received the following components: EZ Connect Ethernet/USB Cable Modem Four adhesive foot pads 1 USB cable 1 RJ-45 Ethernet cable 9 VDC Power Adapter Quick Installation Guide 1 SMC8011CM Driver and Documentation CD Immediately inform your dealer in the event of any incorrect, missing, or damaged parts. If possible, retain the carton and original packing
ページ12に含まれる内容の要旨
INTRODUCTION System Requirements The EZ Connect Cable Modem requires the following PC features to operate: For a USB connection: - A PC equipped with a USB port - Windows 98/ME/2000/XP - The computer must be configured with the TCP/IP protocols For an Ethernet connection: - A computer with a 10/100 Mbps Ethernet connection - The computer must be configured with the TCP/IP protocols 4
ページ13に含まれる内容の要旨
HARDWARE DESCRIPTION The EZ Connect Ethernet/USB Cable Modem is an external cable modem product for high-speed Internet access applications, and complies with the DOCSIS 1.1 standard. The modem provides a concurrent USB and Ethernet connection to a PC or LAN and supports up to 17 users if allowed by your service provider. LED Functions The EZ Connect Ethernet/USB Cable Modem has six LEDs on the front panel. The operational status of the modem is indicated by the LED conditions listed below
ページ14に含まれる内容の要旨
HARDWARE DESCRIPTION LED Color Status Description RDY Green On On line and fully operational. Flashing Indicates that the modem is starting up and searching for an available channel to use to transmit data to the service provider. Acquisition in process for DHCP, TFTP, and ToD (time-of-day). PWR Green On Power is being supplied to the modem. DHCP Client and Server The EZ Connect Ethernet/USB Cable Modem implements both a DHCP client and server. Dynamic Host Configuration Protocol (DHCP) allo
ページ15に含まれる内容の要旨
INSTALLING THE MODEM Locating the Modem The EZ Connect Ethernet/USB Cable Modem can be placed anywhere there is enough flat space, such as on a desktop or shelf. Connecting the Modem Power Socket Cable Connector RJ-45 Port USB Port Before connecting the EZ Connect Ethernet/USB Cable Modem, contact your cable service provider and check the following points: Be sure that your service provider supplies a two-way data link. Check that they have set up an Internet access account. To do this,
ページ16に含まれる内容の要旨
INSTALLING THE MODEM The modem must be properly connected to the service provider’s cable jack. If you are connecting both a TV and the modem to this outlet, you will need to connect a splitter to the cable jack outlet. The splitter filters the TV signal onto one cable and the network signal onto a second cable. (See a typical example on page 9.) 1. Connect a splitter to the cable jack. 2. Connect a 75-ohm coaxial TV cable between the splitter and the cable connector at the back of the mode
ページ17に含まれる内容の要旨
WIRING FOR MULTIPLE USERS (OPTIONAL) 5. The diagram below shows a typical computer/TV installation. PC Cable TV Jack 9 VDC Power Adapter Hub or Switch Splitter 6V DC 5 4 3 2 1 PC TV Ethernet Connection PC PC Cable Modem 75-ohm Coaxial Cable USB Connection Wiring for Multiple Users (Optional) Contact your service provider for availability and instructions if you need to configure your modem for multiple user service. The SMC8011CM supports many multiple user configurations. It can easily ser
ページ18に含まれる内容の要旨
INSTALLING THE MODEM Note: The maximum speed supported by the USB port is 12 Mbps. 2. The “Found New Hardware” screen will appear. Insert the driver disk. When prompted for the location of the driver, enter the drive letter of your CD drive. 3. Follow the instructions given to install the driver. 4. Reboot your computer if prompted. The modem may take from 1~5 minutes to initialize and establish a connection. 5. Start your browser or other Internet application. Ethernet Installation in Wind
ページ19に含まれる内容の要旨
ETHERNET INSTALLATION IN WINDOWS 5. Select the option “Obtain an IP Address.” The EZ Connect Ethernet/USB Cable Modem will automatically assign an IP address to your computer. 6. Click the “Gateway” tab and record the addresses listed under “Installed gateways.” 7. Click the “DNS Configuration” tab. Locate the DNS servers listed under “DNS Server Search Order.” Record any listed addresses. 8. After writing down your settings, check to make sure you have recorded them correctly. Click the “
ページ20に含まれる内容の要旨
INSTALLING THE MODEM 6. Select the option “Obtain an IP Address automatically,” and click “OK” or “Close” to close each window. The EZ Connect Ethernet/USB Cable Modem will now automatically assign an IP address to your computer. TCP/IP Configuration Setting IP Address ____.____.____.____ Subnet Mask ____.____.____.____ Primary DNS Server ____.____.____.____ Secondary DNS Server ____.____.____.____ Default Gateway ____.____.____.____ Host Name ____.____.____.____ Windows XP 1. Select “Start/Co
