ページ1に含まれる内容の要旨
TigerAccess
Extended Ethernet CPE
Extended Ethernet VDSL CPE
High-speed Internet access over existing phone lines
Concurrent data and telephone services (voice/ISDN)
over a single connection
Supports evolving ETSI, ANSI, and ITU VDSL
standards for the copper local loop
Supports power back-off algorithm that permits a mixed
distance deployment
Easy installation
User Guide
SMC7500A/VCP
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
TigerAccess Extended Ethernet CPE User Guide From SMC’s Tiger line of feature rich connectivity solutions 38 Tesla October 2002 Irvine, CA 92618 Part No: 750.5871 Phone: (949) 679-8000 Pub No: 150000010900A R02
ページ4に含まれる内容の要旨
Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice. Copyright © 2002 by SMC Networks, Inc. 38 Tesla, Irvine, CA. All rig
ページ5に含まれる内容の要旨
LIMITED WARRANTY Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller. SMC may, at its own discretion, repair or replace any product not operating as warranted with a similar or functionally equivalent product, during the applicable
ページ6に含まれる内容の要旨
LIMITED WARRANTY WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SMC NEITHER ASSUME
ページ7に含まれる内容の要旨
COMPLIANCES FCC - Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guar
ページ8に含まれる内容の要旨
COMPLIANCES EC Conformance Declaration - Class B SMC contact for these products in Europe is: SMC Networks Europe, Edificio Conata II, o a Calle Fructuós Gelabert 6-8, 2 , 4 , 08970 - Sant Joan Despí, Barcelona, Spain. This information technology equipment complies with the requirements of the Council Directive 89/336/EEC on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility and 73/23/EEC for electrical equipment used within certain voltage limits and
ページ9に含まれる内容の要旨
COMPLIANCES Safety Compliance Underwriters laboratories Inc. (USA) Important! Before making connections, make sure you have the correct Cord Set. Check it (read the label on the cable) against the following specification list. Operating Voltage Cord Set Specifications 120 Volts UL Listed/CSA Certified Cord Set Minimum 18 AWG Type SVT or SJT three conductor cord Maximum length of 4.6 m (15 ft) Parallel blade, grounding type attachment plug rated 15A, 125 V 240 Volts (Europe only) Cord Set with
ページ10に含まれる内容の要旨
COMPLIANCES 14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen und von einer qualifizierten Servicestelle zu überprüfen: a. Netzkabel oder Netzstecker sind beschädigt. b. Flüssigkeit ist in das Gerät eingedrungen. c. Das Gerät war Feuchtigkeit ausgesetzt. d. Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioniert oder Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen. e. Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt. f. Wenn das
ページ11に含まれる内容の要旨
TABLE OF CONTENTS TigerAccess Extended Ethernet CPE . . . . . . . . . . . . . . 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 VDSL Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Package Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ12に含まれる内容の要旨
TABLE OF CONTENTS viii
ページ13に含まれる内容の要旨
TIGERACCESS EXTENDED ETHERNET CPE Introduction SMC’s TigerAccess Extended Ethernet CPE system consists of end-user CPE (Customer Premise Equipment) and a VDSL switch that are connected by standard telephone cable. The VDSL connection delivers an Ethernet data link rated up to 15 Mbps symmetric (full duplex), while simultaneously supporting standard telephone services. The system can be deployed in any multi-dwelling/multi-tenant environment (apartment blocks, hotels, or office complexes) t
ページ14に含まれる内容の要旨
TIGERACCESS EXTENDED ETHERNET CPE and phone signals for each user are combined in the switch, and passed over VDSL lines to individual customers. The SMC7500A/VCP CPE at the customer end of the VDSL line connects to any PC or Macintosh equipped with a 10/100BASE-TX network interface card. Your existing telephone, modem, or fax machine simply plugs into the CPE’s phone port. There is no need for special splitters, terminators, or filters. In fact, there is no need to modify the home wiring
ページ15に含まれる内容の要旨
VDSL TECHNOLOGY VDSL Technology VDSL (Very High Bit-Rate Digital Subscriber Line) is at the high-end of the DSL technologies, offering the best combination of fiber optics and copper to provide high-speed broadband Internet access. VDSL’s primary application is in providing a broadband data service to multi-tenant residential or commercial buildings. In this implementation, fiber optic cable carries data from a telephone company’s central office to the building; then the installed telephon
ページ16に含まれる内容の要旨
TIGERACCESS EXTENDED ETHERNET CPE VDSL delivers high-performance online applications, such as high-quality video and other switched multimedia services. SMC’s Ethernet VDSL CPE system provides robust performance, with a symmetric data rate up to 15 Mbps, and a range up to 1770 m (5800 ft). SMC’s system is based on advanced VDSL QAM (Quadrature Amplitude Modulation) technology with adaptive channel equalization that overcomes bridge taps and other line distortions. Reed-Solomon Forward Erro
ページ17に含まれる内容の要旨
PACKAGE CHECKLIST Spectral compatibility with xDSL, ISDN (2B1Q/4B3T), Smartphone digital PBX extensions and narrowband interference Robust operation on severely distorted lines Supports power back-off algorithm that permits a mixed distance deployment Simple plug-and-play installation LEDs indicate VDSL link status, and power Simple plug-and-play installation Package Checklist The EZ Connect TigerAccess Extended Ethernet CPE package includes: 1 TigerAccess Extended Ethernet CPE (
ページ18に含まれる内容の要旨
TIGERACCESS EXTENDED ETHERNET CPE System Requirements Before you start installing the SMC TigerAccess Extended Ethernet CPE, make sure you can provide the right operating environment. See the following installation requirements: A PC or Macintosh with a 10/100 Mbps Ethernet adapter card installed. For Internet access, the computer must be configured for TCP/IP. Power requirements: 12 VDC via the included AC power adapter. Make sure that a properly grounded power outlet is within 1.8 m
ページ19に含まれる内容の要旨
HARDWARE DESCRIPTION TigerAccess Extended Ethernet CPE The SMC7500A/VCP is an external VDSL CPE product for high-speed Internet access applications. The device provides an Ethernet connection to a computer, and an RJ-11 telephone jack for connection to a telephone. The following figure shows the components of the TigerAccess Extended Ethernet CPE: RJ-11 VDSL line port for connection to a RJ-45 Ethernet port VDSL switch via a wall for connection to a jack LINK LINK computer using Categ
ページ20に含まれる内容の要旨
HARDWARE DESCRIPTION LED Status LED Status Description POWER On Power is being supplied to the CPE. LINK On Indicates a valid 10/100BASE-TX (LAN) Ethernet link. ACTIVITY Flashing Indicates that the CPE is transmitting or (LAN) receiving data on the Ethernet port. LINK On Indicates that the VDSL line port has (LINE) established a valid link with a VDSL switch. 8
