ページ1に含まれる内容の要旨
SX-SDCAG 802.11a/b/g SDIO Module
User Manual
140-00197-100 Rev A
ページ2に含まれる内容の要旨
© 2010 Silex Technology America, Inc. All rights reserved. February 2010 Silex Technology America SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF THIS PRODUCT FOR A PARTICULAR PURPOSE. Silex shall not be liable for any errors contained in this manual or for any damages resulting from loss of use, data, profits, or any incidental or consequential damages arising from the use of SILEX products or services. The information contained in this documentati
ページ3に含まれる内容の要旨
Contents About This User Manual ............................................................................................................................................ 2 Safety Precautions................................................................................................................................................. 2 Emissions Disclaimer....................................................................................................................................
ページ4に含まれる内容の要旨
About This User Manual This user manual provides detailed specifications, diagrams and additional information required to install the SX- SDCAG 802.11a/b/g SDIO module into a product. The intended audiences are the developers and engineers responsible for the integration of the module in another product. Safety Precautions To prevent damage to the SX-SDCAG module’s electronic circuit components, follow established ESD practices and procedures for handling static-sensitive devices. All
ページ5に含まれる内容の要旨
Chapter 1: Introduction The SX-SDCAG is an 802.11a/b/g radio/baseband module in a standard SDIO form factor. Designed for wireless local area network (WLAN) applications that require low power consumption, the SX-SDCAG is ideal for battery-operated portable devices in the medical, weights and measures, transportation and other industries. SX-SDCAG features include: • Highly Integrated System for 802.11a/b/g WLAN • U.FL antenna connectors with diversity support • Wide operating te
ページ6に含まれる内容の要旨
Chapter 2 Hardware Specifications/Compliance FCC Information FCC ID: N6C-SXSDCAG NOTICE In accordance with FCC Part 15, the SX-SDCAG is listed as a Modular Transmitter device. End products that include the SX-SDCAG shall have the words “Contains Transmitter module FCC ID: N6C- SXSDCAG” on an exterior label. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) t
ページ7に含まれる内容の要旨
The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse
ページ8に含まれる内容の要旨
safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by a
ページ9に含まれる内容の要旨
Specifications Operating environment: Temperature: -20º to +70ºC (-4º to +158ºF) Humidity: 20% to 80% Storage environment: Temperature: -30º to +85ºC (-22º to +185ºF) Humidity: 20% to 85% Supply voltage: 3.3V ± 5% Host interface: SDIO IEEE 802.11b Frequency: 2412MHz-2462MHz Transmission system: DSSS Transmission speed: 1/2/5/11Mbps Automatic detection Channel: 1-11 IEEE 802.11g Frequency: 2412MHz-2462MHz Transmission system: OFDM Transmission speed: 6/9/12/18/24/36/48
ページ10に含まれる内容の要旨
Chapter 3 Installation Installation Requirements The SX-SDCAG must be installed in a device that contains a 9-pin SDIO slot. The SX-SDCAG has FCC limited single modular approval, which can eliminate the need for you to obtain FCC Part 15 Subpart C and E (intentional radiation) approvals for your device. In order to use this FCC/IC limited single modular approval for the SX-SDCAG, OEM integrators must: 1. include “Contains FCC ID: N6C-SXSDCAG, IC: 4908B-SXSDCAG” on the exterior label
ページ11に含まれる内容の要旨
2. Connect one end of the antenna cable to the main antenna connector on the SX-SDCAG (see figure 2). If you are using a diversity antenna configuration, connect one end of the second antenna cable to the secondary antenna on the SX-SDCAG. Figure 2. Connecting the Antenna(s) and cable(s) to the SX-SDCAG 3. Insert the SX-SDCAG into an available SDIO slot in your device. Make sure that it is securely seated. 4. If your device is subject to significant vibration or other forces
ページ12に含まれる内容の要旨
Appendix A Antenna Information Antenna Specifications Please refer to the Ethertronics website @ www.ethertronics.com for more detailed information for the Prestta WLAN Embedded Antenna, Part No. 1000418. Table 1 Electrical Specifications Parameter Value Antenna Type Isolated Magnetic Dipole Frequency Range 2.4 to 5.8 GHz Impedance 50 Ohms Gain (peak) 2.4 GHz = 2.5 dBi 5.8 GHz = 3.5 dBi VSWR ≤ 2.0 Standard Connector U.FL Micro Coaxial Antenna Information Silex Page 10 140
ページ13に含まれる内容の要旨
Please refer to the Pulse website @ www.pulseeng.com/antennas for more detailed information for the Pulse Dualband WLAN Ceramic Antenna, Part No. W3006. Table 2 Electrical Specifications Parameter Value Antenna Type High-Dielectric Monopole Frequency Range 2.4 to 5.8 GHz Impedance 50 Ohms Gain (peak) 2.4 GHz = 3.2 dBi 5.8 GHz = 4.2 dBi VSWR ≤ 2.0 Standard Connector U.FL Micro Coaxial Antenna Information Silex Page 11 140-00197-100 Revision A
ページ14に含まれる内容の要旨
Appendix B Silex Contact Information Silex Technology America, Inc. www.silexamerica.com Technical Support: support@silexamerica.com Sales: sales@silexamerica.com Tel: (801) 748-1199 8:00 to 5:00 Mountain Time Tel: (866) 765-8761 toll-free Fax: (801) 748-0730 Silex Technology Europe GmbH www.silexeurope.com Tel: +49-2159-67500 Tel: 0800-7453938 German toll free Email: contact@silexeurope.com Silex Technology Beijing, Inc. www.silex.com.cn Tel: +86-10-8497-1430 E
