ページ1に含まれる内容の要旨
Wireless N Adapter RNX-N2LX
User Manual
ページ2に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the i
ページ3に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual required Luxembourg General authorization required for network and service supply(not for spectrum) Norway Implemented This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund Russian Only for indoor applications Federation Note: Please don’t use the product outdoors in France. 3
ページ4に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual Table of Content Chapter 1 Overview ....................................................................................................5 1.1 Package Content ..........................................................................................5 1.2 Overview of the Product ..............................................................................5 1.3 Features ........................
ページ5に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual Chapter 1 Overview Thank you for choosing Rosewill’s 802.11n 2T2R Wireless USB adapter – RNX-N2LX. This chapter is to introduce you more about this Wireless Adapter. 1.1 Package Content Before getting started, please verify that your package includes the following items: 1. Rosewill 802.11n Wireless USB Adapter x 1 2. 100 cm USB cable x 1 3. NB clip-on x 1 4. Quick Installation Guide
ページ6に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual 1.3 Features Complies with IEEE802.11n, IEEE802.11g, IEEE802.11b standards Supports 2T2R MIMO technology Supports WPA/WPA2 data security, IEEE802.1x authentication, TKIP/AES encryption, and 64/128 – bit WEP encryption Supports high rate of up to 300Mbps download speed for maximum throughput Ease to configure and provides monitoring information Supports Windows 2000, XP, Vista
ページ7に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual Driver support Storage Humidity Windows® 2000, XP 32/64, Vista 32/64, Win7 32/64 10% ~ 90% (Non-condensing) 1.5 System Requirement You must have at least the following A laptop computer/desktop PC with an available USB port At least a 300MHz processor and 32MB of memory Windows OS for Win98SE, ME, 2000, XP, Vista, Win7 A CD-ROM Drive USB controller properly installed and w
ページ8に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual Chapter 2 Installation Guide 2.1 Software Installation Insert the Driver and Utility CD-ROM into the CD-ROM driver. The Wizard should run automatically, and Figure 0-1 should appear. If not, click the Start button and choose Run. In the field that appears, enter D:\autorun.exe (if ‘’D’’ is the letter of your CD-ROM drive). Figure 0-1 Next we use the USB wireless adapter installation
ページ9に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual Figure 0-2 Click Next Figure 0-3 Click Install to start installing 9
ページ10に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual Figure 0-4 Follow the InstallShield Wizard steps, and click Finish when done. Figure 0-5 Now your PC or notebook will restart automatically. 10
ページ11に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual Chapter 3 Install Wireless Adapter The wireless USB Adapter supports up to 300 Mbps wireless connection. This USB adapter is fully compliant with the specifications defined in IEEE802.11n standard. It is designed to complement USB2.0 computers and supports Windows98SE/Me/2000/XP/Vista/Win7. 3.1 USB adapter Installation The status LED indicators of the USB wireless adapter are described
ページ12に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual Figure 0-2 Now you have completed the driver and hardware installation for the adapter. 12
ページ13に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual Chapter 4 Configuration – Station Mode The Wireless USB Adapter provides two modes: Station mode and Access Point mode, the default is Station mode. You can select remote wireless AP to connect to Internet in station mode. But in the Access Point mode, the wireless USB adapter act as a wireless access point which the wireless USB Adapter can connect to share an Internet connection with other
ページ14に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual Speed: The data Tx rate and Rx rate of the current connection. Type: The type of the current wireless connection , Infrastructures or ad hoc Encryption: Current encryption. SSID: The unique name of the wireless network to which the wireless adapter is connecting. Signal Strength: The signal quality of the current connection. Link Quality: The link quality of the current wireless
ページ15に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual 4.2.1 Add Create a new Infrastructure mode profile If you want your wireless computers to communicate with other computers on your wired network via a wireless access point. Click the Add button to create a new infrastructure profile. Figure 0-4 When the Network Info dialog box appears (Figure 0-4), enter a name for the new profile. Enter the Network SSID. Choose the Network Authentic
ページ16に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual Figure 0-6 Choose the Network Authentication Mode and Data encryption from the drop-down menu. And import the network key. Then click OK button. You have successfully created a profile. 4.2.2 Remove Select a profile and click Remove button to delete this profile (Figure 0-7). 16
ページ17に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual Figure 0-7 4.2.3 Edit Select a profile and click Edit button to edit this profile (Figure 0-8). Figure 0-8 17
ページ18に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual Figure 0-9 Modify the profile information according to your demand. 4.2.4 Duplicate Select a profile which you want to copy and then click Duplicate （Figure 0-10 ） Figure 0-10 Import the new profile name in the popup window blank (Figure 0-11) 18
ページ19に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual Figure 0-11 4.2.5 Set default When you want to make one profile as a default wireless connection, you should select the profile and click Set default button. The wireless adapter will use this profile to connect to wireless network automatically when the utility running next time. Figure 0-12 4.3 Available Network The Available Network tab displays a list of infrastructure and ad-hoc n
ページ20に含まれる内容の要旨
Wireless N Adapter RNX-N2LX User Manual Figure 0-13 Double-click the network to which you wish to connect. Figure 0-14 Refer to Figure 0-14 choose the Authorization modes and Encryption modes in the drop-down box. If the wireless network uses a Passphrase, enter the Passphrase in 20
