QSC Audio DD1-3の取扱説明書

ページ1に含まれる内容の要旨

DDI-3
DataPort Accessory Card
INSTALLATION GUIDE
*TD-000118-00*






DDI-3
*TD-000118-00*
Rev. A
1

ページ2に含まれる内容の要旨

Instructions for the DDI-3 DataPort Accessory Card STBY I. INTRODUCTION VMN1 CGND IMN1 The DDI-3 DataPort Accessory Card converts a QSC amplifier’s DataPort to an eight-position terminal block, providing CH2+ CH2- convenient access to the pins of the amplifier’s DataPort; this is useful for connecting input signals or implementing a IMN2 AGND remote on/off (standby) system without using a DataPort cable. Four solder pads provide access to the amplifier’s output CH1+ VMN2 voltage and current moni

ページ3に含まれる内容の要旨

III. WARRANTY AND DISCLAIMERS QSC Audio Products, Inc. is not liable for any damage to speakers, amplifiers, or any other equipment that is caused by negligence or improper installation and/or use of the DDI-3 DataPort Accessory Card. PRODUCT WARRANTY QSC Audio Products, Inc. ("QSC") guarantees its products to be free from defective material and / or workmanship for a period of three (3) years from date of sale, and will replace defective parts and repair malfunctioning products under this warra

ページ4に含まれる内容の要旨

QSC Audio Products, Inc., 1675 MacArthur Boulevard Costa Mesa, California 92626 USA PH: (714) 754-6175 FAX: (714) 754-6174 QSControl2 is a trademark of QSC Audio Products, Inc. “QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office. 4