ページ1に含まれる内容の要旨
Internet Telephony PBX System
IPX-1900
User’s manual
Version 1.0.
ページ2に含まれる内容の要旨
Copyright Copyright (C) 2008 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copyrighted. No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable for
ページ3に含まれる内容の要旨
Revision User’s Manual for PLANET Internet Telephony PBX System: Model: IPX-1900 Rev: 1.0 (June, 2008) Part No. EM-IPX1900 Series V1.0 3
ページ4に含まれる内容の要旨
Table of Contents Chapter 1 ................................................................................................ 6 Introduction............................................................................................ 6 Overview............................................................................................................................6 Package Content ..............................................................................................................
ページ5に含まれる内容の要旨
Chapter 5 Management ....................................................................... 57 Admin Account ...............................................................................................................57 Date & Time .............................................................................................................58 Ping Test ...................................................................................................................59 Save & Restore .....
ページ6に含まれる内容の要旨
Chapter 1 1 Introduction Overview PLANET IPX-1900 IP PBX telephony systems are designed and optimized for the small business in daily communications. The IPX-1900 are able to accept 300 user registrations, and easy to install and manage a fully working system with the convenience and cost advantages. The PLANET IPX-1900 is also designed to operate on a variety of VoIP applications; it provides centralized call control, auto-attendant, voice conferencing, and PSTN access, digital and IP
ページ7に含まれる内容の要旨
IP PBX Features • PBX Features Automated Attendant (AA) Interactive Voice Responses (IVR) Voicemail support (VM) Call Detailed Record (CDR) User Management via Web Browsers Display 300 Registered User’s Status: Unregistered / Registered / On-Call Multiple Service Providers Lines / SIP Accounts (30) Simultaneous Trunk Links: 30 concurrent trunk calls SIP Trunk / Gateway Trunk / FXO Trunk Management Two-stage / One-stage call to Trunk by Trunk Group Configuration Build in 2 / 4 FXO P
ページ8に含まれる内容の要旨
Front Panel Indicators Figure 1-1. Front Panel of IPX-1900 Front Panel LED State Descriptions On PBX Power ON PWR Off PBX Power OFF On System is booting SYS Flashing System is ready On LAN is connected successfully LAN Flashing Data is transmitting Off Ethernet not connected to PC On PBX network connection established WAN Flashing Data traffic on cable network Off Waiting for network connection On Port is busy FXO/FXS Port Flashing Ring indication. (FXS only) Of
ページ9に含まれる内容の要旨
The WAN port supports auto negotiating Fast Ethernet 10/100Base-TX networks. This port allows your IP PBX to be 3 WAN connected to an Internet Access device, e.g. router, cable modem, ADSL modem, through a CAT.5 twisted pair Ethernet cable. The LAN port allows your PC or Switch/Hub to be connected to the 4 LAN IP PBX through a CAT.5 twisted pair Ethernet cable. 2 external slosts with compliance FXO/FXS module. FXO module is connects to PBX or CO line with RJ-11(Write) analog line. FXO po
ページ10に含まれる内容の要旨
Chapter 2 Preparations & Installation 2 Physical Installation Requirement This chapter illustrates basic installation of IP PBX • Network cables. Use standard 10/100Base-TX network (UTP) cables with RJ45 connectors. • TCP/IP protocol must be installed on all PCs. For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable modem (for WAN port usage) Administration Interface PLANET IP PBX provides GUI (Web based, Graphical User Interface) for machine mana
ページ11に含まれる内容の要旨
In order to connect machine for administration, please locate your PC in the same network segment (192.168.0.x) Note of IP PBX. If you’re not familiar with TCP/IP, please refer to related chapter on user’s manual CD or consult your network administrator for proper network configurations. Network Interface quick configurations Wizard is a tool to quickly setup IP PBX. After pass the authentication, please click for quick IPX PBX setup. For most users, I
ページ12に含まれる内容の要旨
Step2. NAT Setting LAN IP Setting Private IP address for connecting to a local private network. LAN IP Address (Default: 192.168.0.1) Subnet mask for the local private network (Default: Subnet Mask 255.255.255.0) DHCP Server Enable to open LAN port DHCP server Assigned DHCP IP Address DHCP server range from start IP to end IP Client to ask DHCP server refresh time, range from 60 to DHCP IP Lease Time 86400 seconds Table 2-2. LAN IP description of IP PBX Figure 2-3. Wizard-NA
ページ13に含まれる内容の要旨
Figure 2-4. Wizard-IP PBX settings Service Provider: Caller ID Service provider name Username Input Provider name Password Input Provider password Host Input Providers server address Port Providers server port Table 2-3. Service provider description User Extensions: User Extension Input Extension number Password Input Extension password Caller Id Input Extension caller id Table 2-4. User extension description After completing the wizard setup, click “Submit” button, Th
ページ14に含まれる内容の要旨
Figure 2-5. Wizard-Rebooting Please consult your ISP personnel to obtain proper PPPoE/IP address related information, and input carefully. Note If Internet connection cannot be established, please check the physical connection or contact the ISP service staff for support information. RS-232 Console Port Configuration RS-232 port (DB-9pin Female connector), Configure the COM Port Properties as following: Bits per second: 57600, Flow control: None 1. Connect Gateway R
ページ15に含まれる内容の要旨
4. Create new connection. Select “COM” port that connect PC to gateway Figure 2-7. Hyper Terminal Screen 5. Make connection(Bits Pre second:57600 Flow contact: None) 6. Input “Enter” and Show Welcome display. 7. Login, input the Password to login.(Password as the same as Access, default is admin) 8. Setting Gateway Configure like telnet mode (Setting Table following as Telnet Setting table) 15
ページ16に含まれる内容の要旨
Chapter 3 IP PBX Setup 3 SIP Basic Setting SIP (Session Initiation Protocol) is a request-response protocol, dealing with requests from clients and responses from servers. Participants are identified by SIP URLs. Requests can be sent through any transport protocol. SIP determines the end system to be used for the session, the communication media and media parameters, and the called party's desire to engage in the communication. Once these are assured, SIP establishes call parameters at ei
ページ17に含まれる内容の要旨
Maximum duration of incoming registration/subscriptions we allow. Max Registration Time Default 3600 seconds. Minimum duration of registrations/subscriptions. Default 60 Min Registration Time seconds Default Incoming/Outgoing Default duration (in seconds) of incoming / outgoing registration. Registration Time Min RoundtripTime Minimum roundtrip time for messages to monitored hosts, Defaults to 200 ms (T1 Time) Language Set default language for all users. Enable Relaxed DTMF Use rel
ページ18に含まれる内容の要旨
Register TimeOut Retry registration calls at every 'x' seconds (default 20). Number of registration attempts before we give up; 0 = Register Attempts continue forever. Table 3-2. Outbound DIP registration description NAT Support The externip, externhost and localnet settings are used if you use IP PBX behind a NAT device to communicate with services on the outside. Figure 3-4. NAT support settings Address that we're going to put in outbound SIP messages if we're Extern IP
ページ19に含まれる内容の要旨
User Extensions Setup Extension List Figure 3-5. User extension settings Advance Click to edit an extension other setting. Delete Click to delete an extension. Table 3-5. User extension description Advance Setup Figure 3-6. Extension advance settings 19
ページ20に含まれる内容の要旨
User Extension Input Extension number Password Input Extension password Caller Id Input Extension caller id Table 3-5. Extension advance description - Call group / Pickup group select : Call Group An Extension can set single/multiple call group(s) 1-10 id Pickup Group An Extension can set single/multiple Pickup group(s) 1-10 id Table 3-6. Call / Pickup group description - Call forward option : DND(Forward to Voice mail) Enable / Disable forward to voice mail. Call forward always
