ページ1に含まれる内容の要旨
USER
MANUAL
MODEL 3004
MTE Series
d
s
Part# 07M3004MTE-A
SALES OFFICE
A
(301)975-1000
Revised 08/22/00
TECHNICAL SUPPORT
(301)975-1007
An ISO-9001
http://www.patton.com
Certified
Company
Doc# 011051U
Tail End Adapter
Miniature Self-Powere
ページ2に含まれる内容の要旨
1.0 WARRANTY INFORMATION TABLE OF CONTENTS Patton Electronics warrants all Model 3004 MTE components to be SECTION E free from defects, and will — at our option — repair or replace the product 1.0 Warranty Information ............................................................. 2 should it fail within one year from the first date of shipment. This 1.1 Radio and TV Interference warranty is limited to defects in workmanship or materials, and does not 1.2 CE Notice cover customer damage, abuse o
ページ3に含まれる内容の要旨
1.3 SERVICE 2.0 GENERAL INFORMATION All warranty and nonwarranty repairs must be returned freight Thank you for your purchase of this Patton Electronics product. This prepaid and insured to Patton Electronics. All returns must have a product has been thoroughly inspected and tested and is warranted for One Return Materials Authorization number on the outside of the shipping Year parts and labor. If any questions or problems arise during installation container. This number may be obtained fr
ページ4に含まれる内容の要旨
3.0 OPERATION 4.0 INSTALLATION Connect the port of the 3004-MTE labeled "SYSTEM" to the main modem Data is transferred from the system to the tail using the system receive or multiplexer sub-channel, i.e. the "system DCE". clock, which is provided to the external clock input (terminal timing) of the tail device. Data from the tail circuit is loaded into the 3004-MTE buffer using the Connect the port of the 3004-MTE labeled "TAIL" to the local tail-end DCE receive clock of the tail device. Data
ページ5に含まれる内容の要旨
APPENDIX A APPENDIX B MODEL 3004-MTE SERIES S MODEL 3004-MTE/ .35 V TECHNICAL SPECIFICATIONS INTERFACE PIN ASSIGNMENT Connection: Tail circuit, DCE to DCE Wiring: Internal "cross-over" wiring Pin # Signal A............................FG (Frame Ground) Transmission format:: Synchronous, transparent to protocol B............................SGND (Signal Ground) C ........................... RTS (Request to Send) Data rate: Up to 2.304 Mbps D ........................... CTS (Clear to Send) E ....
ページ6に含まれる内容の要旨
APPENDIX C APPENDIX D S MODEL 3004-MTE/530 S MODEL 3004-MTE/ .36 V INTERFACE PIN ASSIGNMENT INTERFACE PIN ASSIGNMENT RS-530 Interface Pin Description RS-449 Interface Pin Description (DB-25 Connector) (DB-37 Connector) Pin # Signal Pin # Signal 1 FG (Frame Ground) 1 FG (Frame Ground) 2 TD (Transmit Data-A) 4 TD (Transmit Data-A) 3 RD (Receive Data-A) 5 TC (Transmit Timing-A) 4 RTS (Request to Send-A) 6 RD (Receive Data-A) 5 CTS (Clear to Send-A) 7 RTS (Request to Send-A) 6 DSR (Data Set Ready-A)
