ページ1に含まれる内容の要旨
PUSH TO LOCK/EJECT
Network camera
Operating Instructions
Model Nos. WV-NP1000
WV-NP1004
(Lens is option.)
The illustration above is of the WV-NP1004.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model numbers in these Operating Instructions are given without suffix.
WV-NP1004
ページ2に含まれる内容の要旨
Contents Preface ............................................................................................................................ 3 About these operating instructions .............................................................................. 3 Trademarks and registered trademarks ...................................................................... 3 Monitoring Images on a PC ............................................................................................. 4 Monitor
ページ3に含まれる内容の要旨
Preface About these operating instructions There are 2 sets of operating instructions for the WV-NP1000/WV-NP1004 as follows. • Operating Instructions (book) • Operating Instructions (PDF, these operating instructions) These operating instructions contain descriptions of how to operate this product using a PC via a network and of how to configure the settings. These operating instructions also contain descriptions of how to display the SETUP menu on the video monitor connected to the VIDEO OUT c
ページ4に含まれる内容の要旨
Monitoring Images on a PC The following are descriptions of how to monitor images from the camera on a PC. Monitor images from a single camera Step 1 Step 3 Start up the web browser. Press the [Enter] key on the keyboard. → Live images will be displayed. Step 2 Enter the IP address designated using the Panasonic IP setup software in the address box of the browser. (Example: http://192.168.0.10) Notes: • When "ON" is selected for "User Authentication", the authentication window will be displayed
ページ5に含まれる内容の要旨
About the "Live" page q [Live] button o Camera name !0 Alarm occurrence indication button !1 Audio button !2 One shot button w [Setup] button e Multi-screen buttons !3 Main area r Image type buttons t Zoom buttons y Brightness buttons u AUX buttons i B/W buttons y Brightness buttons *2 q [Live] button Adjust the brightness of images. Click this button to display the "Live" page. Refer to page 7 for descriptions of how to operate the "Live" u AUX buttons *2 page. Click the desired button to open
ページ6に含まれる内容の要旨
!2 One shot button Click this button to take a picture (a still picture). The picture will be displayed on a newly opened window. !3 Main area Images from the camera will be displayed in this area. *1 Operable by only users whose access level is "1. Administrator" *2 Operable by only users whose access level is "1. Administrator" or "2. Camera control" when "ON" is selected for "User authentication" ( page 35). *3 The access level to operate this button can be changed by the settings of "Authe
ページ7に含まれる内容の要旨
Available operations when live images are displayed *1 Operable by only users whose access level is "1. Administrator" *2 Operable by only users whose access level is "1. Administrator" or "2. Camera control" when "ON" is selected for "User authentication" ( page 35). *3 The access level to operate this button can be changed by the settings of "Authentication" on the "Audio" tab. ( page 26) Refer to page 35 for further information about the access level. Operation Description Display the setu
ページ8に含まれる内容の要旨
Operation Description Images will be automatically switched between colour and B/W according to brightness (illumination). Click this button when using the camera in the nighttime with near-infra red rays as light source. Acknowledge alarm occur- This button will be displayed when an alarm occurred. When rences *2 this button is clicked, the alarm output connector will be reset and this button will disappear. When "Latch" is selected for "Alarm output setup", the alarm output connector will be r
ページ9に含まれる内容の要旨
Monitor images from multiple cameras Images from multiple cameras can be displayed on a multiscreen. Images from up to 4 cameras can be displayed simultaneously. To display images on a multiscreen, it is necessary to register cameras in advance. 4 cameras can be registered as a group and up to 2 groups (8 cameras) can be registered. ( page 27) Important: Select "OFF" for both the user authentication and the host authentication of the camera to be registered. ( pages 35 and 36) Step 1 (1) To d
ページ10に含まれる内容の要旨
Action at an Alarm Occurrence The alarm action will be performed when the following alarm occur. Alarm type Terminal alarm: When connecting an alarm device such as a sensor to the alarm connector on the rear of the camera, the alarm action will be performed when the connected alarm device activated. VMD alarm: When a motion is detected in the set VMD area, the alarm action will be performed. * VMD stands for "Video Motion Detection". Command alarm: When received a command alarm from the connecte
ページ11に含まれる内容の要旨
Transmit Images onto an FTP Server Images can be transmitted to an FTP server. By configuring the following settings, transmission of images captured at an alarm occurrence or captured at a designated interval to an FTP server will become available. Important: When using this function, set the user name and password to restrict users who can log into the FTP server. Transmit an alarm image at an alarm occurrence (Alarm image FTP transmission) An alarm image can be transmitted at an alarm occurr
ページ12に含まれる内容の要旨
Save images on the SD memory card when failed to transmit images by the FTP periodic transmission function Images failed to transmit by the FTP periodic transmission can be saved automatically on the SD memory card. To obtain the images saved on the SD memory card, use the Windows command prompt or FTP client software. The obtained images can be browsed on a PC. Note: We make no guarantee for any damages of files on the SD memory card incurred by mulfunction or error occur- rence in files save
ページ13に含まれる内容の要旨
Step 3 Move the current directory to drive B and obtain images. Notes: • When logging in the camera, the current directory will be drive D. Images on the SD memory card can be found in the "FTP" directory under drive B. Move to the "FTP" directory and obtain images. Directory Directory (year/month/day) (hour/minute) Directory 050101 0123 Drive B FTP An image failed to transmit by the FTP periodic transmission function : (Example) img_05010101230000.jpg 050102
ページ14に含まれる内容の要旨
About the Network Security of the Camera Equipped security functions The following security functions are featured in this camera. q Access restrictions by the host authentication and the user authentication It is possible to restrict users from accessing the camera by setting the host authentication and/or the user authentication to on. ( pages 35 and 36) w Access restrictions by changing the HTTP port It is possible to prevent illegal access such as port scanning, etc. by changing the HTTP po
ページ15に含まれる内容の要旨
Display the Setup Menu and Configure the Settings of the Camera Using a PC The following are descriptions of how to configure the settings on the SETUP menu. The setup menu is operable by only users whose access level is "1. Administrator". How to display the setup menu Refer to the next page for further information about Step 1 this menu. Display the "Live" page. ( page 5) Step 2 Click the [Setup] button on the "Live" page. → The window with the user name and password entry fields will be di
ページ16に含まれる内容の要旨
How to operate the setup menu When completing the setting items in field A, click the [SET] button below field A (A-1). The edited set- ting items in field A will not be applied unless the [SET] button below field A (A-1) is clicked. In the same manner above, click the [SET] button below field B (B-1) when completing the setting items in field B. Step 1 Click the desired button in the frame on the left of the window to display the respective setup menu. When there are tabs at the top of the set
ページ17に含まれる内容の要旨
About the operation window !1 Status display area q [Live] button w [Basic setup] button !2 Main area e [Camera setup] button r [Multi-screen] button t [Alarm setup] button y [Authentication setup] button u [Server setup] button i [Network setup] button o [Maintenance] button !0 [Help] button q [Live] button t [Alarm setup] button Click this button to display the "Live" page. Click this button to display the "Alarm setup" page. The settings relating to alarm occurrences such as w [Basic setup] b
ページ18に含まれる内容の要旨
i [Network setup] button Click this button to display the "Network setup" page. The network settings and the settings relating to DDNS (Dynamic DNS), SNMP (Simple Network management Protocol) and FTP (File Transfer Protocol) can be configured on the "Network setup" page. Refer to page 39 for further information. o [Maintenance] button Click this button to display the "Maintenance" page. System log check, firmware upgrade and initialization of the setup menu can be performed on the "Maintenance"
ページ19に含まれる内容の要旨
Configure the basic settings of the camera [Basic setup] The basic settings such as time and date and camera name, and the settings relating to the NTP server and the SD memory card can be configured on the "Basic setup" page. The "Basic setup" page has 3 tabs of the [Basic] tab, the [NTP] tab and the [SD memory card] tab. Configure the basic settings [Basic] Click the [Basic] tab on the "Basic setup" page. The settings such as the camera name, time and date, etc. can be configured on this pag
ページ20に含まれる内容の要旨
[Daylight saving (Summertime)] Select "ON" or "OFF" to determine whether or not to apply daylight saving time. ON: Applies summer time. An asterisk (*) will be dis- played on the left side of the displayed time and date. OFF: Does not apply summer time. Default: OFF [Link/Access LED] Select "ON" or "OFF" to determine whether or not to light the link LED, the access LED of the network con- nector, and the SD memory card error LED. Select "ON" to check the network status by lighting the LEDs. Sel
