ページ1に含まれる内容の要旨
motorola H790
Quick Start Guide
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
your headset your headset Take a moment to familiarize yourself with your new Motorola H790 Headset. Volume Buttons Earhook Micro- Ear phone Speaker Power Charging Switch Port Indicator Call Light Button 1
ページ4に含まれる内容の要旨
charge it charge it Charge your headset before using it. The indicator light is red or yellow while the battery is charging. When the battery is fully charged, the indicator light turns green. Note: Headset is not functional while charging. Note: Your battery is designed to last the life of your product. It should only be removed by a recycling facility. Any attempt to remove or replace your battery will damage your headset. 2
ページ5に含まれる内容の要旨
pair & connect pair & connect Once charged, let’s get your headset paired and connected to your Bluetooth phone(s). pair & connect first phone 1 Turn off any Bluetooth devices previously paired with your headset. 2 Turn on the Bluetooth feature on your phone. 3 Put headset on your ear (see “wear it” on page 7 for help). 4 Turn on your headset (see “turn on” on page 8 for help). The indicator light becomes steadily lit in blue and you hear “ready to pair”. 5 Follow voice prompts to connec
ページ6に含まれる内容の要旨
pair & connect pair & connect second phone (optional) 1 Turn off first phone and any other Bluetooth devices previously paired with your headset. 2 Turn your headset off (see “turn off” on page 8 for help). 3 Turn on the Bluetooth feature on your phone. 4 Put headset on your ear. 5 Turn on your headset. The indicator light becomes steadily lit in blue and you hear “ready to pair”. 6 Follow voice prompts to connect your phone to your headset. When your headset successfully pairs with your
ページ7に含まれる内容の要旨
pair & connect both phones. The last paired phone (your second phone) is now your primary phone (or “phone 1”) for voice dial functionality. test your connection 1 Place the headset on your ear. 2 On one phone, dial the number you want to call and press Call/Send key. Repeat for the second phone. If your phones and headset are successfully connected, you hear ringing on the headset. For daily use, make sure your headset is turned on, and your phone’s Bluetooth feature is on. Your headset
ページ8に含まれる内容の要旨
put it on put it on choose an earbud To get the best headset performance, try out all the supplied ear cushions to get a good fit. choose an ear Your headset comes ready for the right ear. To change for the left ear: 6
ページ9に含まれる内容の要旨
put it on wear it Flex the ear hook and loop it over your ear. Tip: For optimal audio performance and comfort, be sure to position the ear cushion into your ear canal and point the headset microphone towards your mouth. 7
ページ10に含まれる内容の要旨
turn on & off turn on & off turn on Slide the Power switch to the on position (no red is shown under the switch).The indicator light flashes blue three times, then flashes in blue and purple (if connected with a device) or is steadily blue (if ready to be paired). Power Switch Indicator Light turn off Slide the Power switch to the off position (red is shown under switch). The indicator light flashes three times then turns off. 8
ページ11に含まれる内容の要旨
battery check battery check Press and hold both Volume buttons while not on a call. indicator voice prompt talk time light red “battery level less than 1.5 hours is low” yellow “battery level between 1.5 to 3.5 is medium” hours green “battery level more than 3.5 hours is high” To save battery power, turn off the headset when you don't use it for an extended time. 9
ページ12に含まれる内容の要旨
calls calls To... answer call Press the Call button. reject call Press and hold a Volume button until you hear an audio tone make a voice Press the Call button and you hear dial call an audio tone. redial last call Press and hold the Call button until you hear an audio tone. mute or Press and hold both Volume unmute a call buttons until you hear “mute on” or “mute off”. end a call Press the Call button. answer second Press the Call button. incoming call reject second Press and hold a Volu
ページ13に含まれる内容の要旨
calls Note: Your headset supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See the instructions that came with your phone. Note: Some call features are phone/network dependent. 11
ページ14に含まれる内容の要旨
status indicators status indicators indicator light (with charger plugged in) headset headset status indicator red charging (battery level less than 50% charge) yellow charging (battery level more than 50% charge) green charging complete indicator light (with charger not plugged in) headset indicator headset status off power off three blue flashes powering on/off steady blue pairing/connect mode rapid blue/purple connection successful flashes 12
ページ15に含まれる内容の要旨
status indicators headset indicator headset status quick blue flash incoming/outgoing call on phone 1 quick purple flash incoming/outgoing call on phone 2 slow blue pulse connected (on a call) slow blue flash standby (connected to one phone) slow green flash standby (connected to two phones) slow red flash idle (not connected to a phone) slow purple pulse connected call muted steady red attempting to connect quick red flash low battery Note: After 1 minute on a call or 20 minutes of inactivi
ページ16に含まれる内容の要旨
tips & tricks tips & tricks enable/disable voice prompts With the headset turned on, press and hold either Volume button and Call button until you hear “voice prompts on” or “voice prompts off”. restore to factory settings Caution: This action erases all pairing information stored in your headset. To restore your headset to original factory settings, with the headset turned on, press and hold both Volume buttons and Call button for 10 seconds until the indicator light is steady blue. 14
ページ17に含まれる内容の要旨
problems? problems? My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is flashing in blue, first turn off the other device, then turn the headset off and on. The indicator light becomes steadily lit in blue and you hear “ready to pair”. My phone doesn't find my headset when searching. Make sure the indicator light on your headset is steadily lit in blue when your phone is searching for devices. If no
ページ18に含まれる内容の要旨
problems? not, press and hold the Call and both Volume buttons until you hear “ready to pair” and see the indicator light steadily lit in blue. Support. If you need more help, contact us at 1-877-MOTOBLU or visit us at www.motorola.com/Bluetoothsupport or www.motorola.com/bluetoothconnect. 16
ページ19に含まれる内容の要旨
Safety & General Information Safety Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR DEVICE. Approved Accessories Use of accessories not approved by Motorola, including but not limited to batteries, antennas, and convertible covers, may cause your mobile device to exceed RF energy exposure guidelines and may void your mobile device’s warranty. For a list of approved Motorola accessories, visit our Web site at: www.motorola.com Batteri
ページ20に含まれる内容の要旨
Caution About High Volume Usage Warning: Exposure to loud noise from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the volume sound level, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect. To protect your hearing: � Start your volume control at a low setting and use as low a volume as possible. � Limit the amount of time y
