ページ1に含まれる内容の要旨
BEFORE YOU
BEGIN
Before using this product, read the Important Safety and
Legal Information pamphlet and follow its instructions.
Take a moment before you get started to
motorola
familiarize yourself with your new
H710
H710 Headset.
Call
Button
Volume
Multi-Color
Buttons
Indicator Light
Boom
Quick Start Guide
Speaker
Microphone
(on reverse
(on reverse side)
side)
START BLUETOOTH
CHARGE
2
1
Your Headset's Battery
FEATURE
Your Phone
Charge your headset's battery for 2 hours:
Your phone's
ページ2に含まれる内容の要旨
PA AIR 3 Your Heads set and Phone Before you can use your headset, you must pair Step B - SET YOUR PHONE TO LOOK FOR (link) it with your phone. YOUR HEADSET For most Motorola phones: Step A - ENSURE HEADSET IS IN PAIRING MODE On your Motorola phone, press M (Menu) > 1 Open the headset boom to power on the Settings > Connection > Bluetooth Link > Handsfree headset and initiate pairing. After a few > Look for Devices. moments, the indicator light will be steadily lit in blue to ind
ページ3に含まれる内容の要旨
USING A SE ECOND PHONE? Multipoint technology allows you to make and Use your first phone to connect to your 2 receive calls from two Bluetooth enabled headset. devices like your personal and business phones. a On your Motorola phone, press (Menu) M To pair a second phone to your headset, follow > Settings > Connection > Bluetooth Link > these steps: Audio Devices. Turn off any phones or devices that are 1 The phone lists Bluetooth devices it finds. already paired with your headse
ページ4に含まれる内容の要旨
TURNING HEADSET Features and ON AND OFF To turn your headset on, open the headset Functions Guide boom. The indicator light flashes blue (if connected with a device) or is steadilly lit (if ready to be paired). To turn your headset off, close the headset boom. The indicator light will turn off. Multi-Color IMPORTANT: Indicator Light Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your H710. WEARING THE HEADSET CHANGING FOR USE
ページ5に含まれる内容の要旨
CHANGING VOLUME QUICK BATTERY BUTTON ORIENTATION CHECK You can also change the orientation of the When not in a call, open the boom to check volume buttons on your headset. your headset's battery charge level by pressing and holding both Volume buttons. Close the boom to turn the headset off. 1 The indicator light displays charge status Press and hold down the desired 2 until you release the buttons. See below for "volume up" button and open the boom. details on indicator light and a
ページ6に含まれる内容の要旨
MAKING CALLS CONTINUED AUDIO TONES Function Action Audio T one Headset Status Redial last call Press and hold the Ring tone Incoming call Call button until you Short tone Phone network not hear a tone available Answer a second Press and hold the High to low tone End call incoming call Call button (places Two short tones when Volume at minimum first call on hold), and pressing Volume button or maximum hear a tone during a call Reject second incoming Press and hold ei
