ページ1に含まれる内容の要旨
703t Server Hardware Installation
CallPilot
Release 4.0
Document Number: 555-7101-226
Document Version: Standard 1.04
October 2006
ページ2に含まれる内容の要旨
Standard 1.04 Copyright © 2006 Nortel Networks. All Rights Reserved. The information in this document is subject to change without notice. The statements, configurations, technical data, and recommendations in this document are believed to be accurate and reliable, but are presented without express or implied warranty. Users must take full responsibility for their applications of any products specified in this document. The information in this document is proprietary to Nortel Networks. The
ページ3に含まれる内容の要旨
October 2006 CRYSTAL REPORTS is a trademark of Seagate Software Inc. EUDORA is a trademark of Qualcomm. eTrust and InoculateIT are trademarks of Computer Associates Think Inc. DIRECTX, EXCHANGE.NET, FRONTPAGE, INTERNET EXPLORER, LINKEXCHANGE, MICROSOFT, MICROSOFT EXCHANGE SERVER, MS-DOS, NETMEETING, OUTLOOK, POWERPOINT, VISUAL STUDIO, WINDOWS, WINDOWS MEDIA, and WINDOWS NT are trademarks of Microsoft Corporation. GROUPWISE and NOVELL are trademarks of Novell Inc. LOGITECH is a trademark of L
ページ4に含まれる内容の要旨
Standard 1.04 WINZIP is a trademark of Nico Mark Computing, Inc. XEON is a trademark of Intel, Inc. All other trademarks and registered trademarks are the property of their respective owners. Information for Japan Japan Denan statement The following applies to server models 1005r, 703t, and 1002rp: Warning Please be aware of the following while installing the equipment: Please use the connecting cables, power cord, and AC adaptors shipped with t
ページ5に含まれる内容の要旨
October 2006 があります。この場合には使用者が適切な対策を取るように要求されることがあ ります。 This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may occur, in which case, the user may be required to take corrective action. 703t Server Hardware Installation 5
ページ6に含まれる内容の要旨
Standard 1.04 6 CallPilot
ページ7に含まれる内容の要旨
Publication history October 2006 Standard 1.04 of 703t Server Hardware Installation is issued for general release for CallPilot 4.0. September 2006 Standard 1.03 of 703t Server Hardware Installation is issued for general release for CallPilot 4.0. April 2006 Standard 1.02 of 703t Server Hardware Installation is issued for general release for CallPilot 4.0. July 2005 Standard 1.01 of 703t Server Hardware Installation is issued for general release for CallPilot 4.0. July 2005 Standard 1.0 of
ページ8に含まれる内容の要旨
Publication history Standard 1.04 8 CallPilot
ページ9に含まれる内容の要旨
Task List To unpack the equipment ............................................................... 37 To remove the side panel ............................................................... 39 To inspect the server interior........................................................... 42 To replace the side cover ............................................................. 43 To install the chassis feet ............................................................. 45 To install the server.....
ページ10に含まれる内容の要旨
Task List Standard 1.04 10 CallPilot
ページ11に含まれる内容の要旨
Contents 1 How to get Help 13 2 703t server description 15 Server features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Slot assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Network connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Supported peripheral devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Reference do
ページ12に含まれる内容の要旨
Contents Standard 1.04 12 CallPilot
ページ13に含まれる内容の要旨
Chapter 1 How to get Help This section explains how to get help for Nortel products and services. Getting Help from the Nortel Web site The best way to get technical support for Nortel products is from the Nortel Technical Support Web site: http://www.nortel.com/support This site provides quick access to software, documentation, bulletins, and tools to address issues with Nortel products. More specifically, the site enables you to: download software, documentation, and product bulletins sea
ページ14に含まれる内容の要旨
How to get Help Standard 1.04 Outside North America, go to the following Web site to obtain the phone number for your region: http://www.nortel.com/callus Getting Help from a specialist by using an Express Routing Code To access some Nortel Technical Solutions Centers, you can use an Express Routing Code (ERC) to quickly route your call to a specialist in your Nortel product or service. To locate the ERC for your product or service, go to: http://www.nortel.com/erc Getting Help through a No
ページ15に含まれる内容の要旨
Chapter 2 703t server description In this chapter Server features 16 Slot assignments 23 Network connectivity 25 Supported peripheral devices 30 Reference documents 31 703t Server Hardware Installation 15
ページ16に含まれる内容の要旨
703t server description Standard 1.04 Server features This section provides a general overview of the 703t server. Server dimensions Height chassis only: 420 mm (16.75 in.) with chassis feet: 440 mm (17.5 in.) Width chassis only: 215 mm (8.6 in.) with chassis feet: 320 mm (12.7 in.) Depth (distance from front to 650 mm (26 in.) back) Clearance front: 250 mm (10 in.) rear: 125 mm (5 in.) side: 75 mm (3 in.) Note: Additional side clearance is required for service. top: 75 mm (3 in.) Weight of
ページ17に含まれる内容の要旨
October 2006 703t server description Environmental specifications Environmental condition Specification Operating temperature 10°C to 35°C (50°F to 95°F) Maximum rate of change must not exceed 10°C (50°F) per hour. Non-operating (storage) -40°C to 70°C (-40°F to 158°F) temperature Non-operating humidity 95%, non-condensing at 30°C (86°F) Altitude 1829 m (6000 ft) Electrostatic discharge 15 kV or more Acoustic noise 50 dBA in a typical office ambient temperature (18°C to 25°C [64.4°F to 77°F])
ページ18に含まれる内容の要旨
703t server description Standard 1.04 Front panel features The following diagram shows the 703t server’s front panel features: CD-ROM Reset button drive Network LEDs CD Sleep mode drawer button (not used) eject button Power button Status LEDs Tape drive USB connector (future use) Air flow slots Floppy disk eject button Floppy disk drive Hard drive bays Chassis intrusion detection switch (not used) Air flow slot G101759 18 CallPilot
ページ19に含まれる内容の要旨
October 2006 703t server description The table below describes the parts that are identified in the preceding diagram: Part Function Reset button Triggers a hardware (cold) reset. Do not use this button to perform a server restart. Restart the server as described in “Restarting the server” in the Installation and Configuration Task List (555-7101-210). Network Left: 10/100Base-T controller LED controller LEDs (NIC1 10/100 MB: ELAN * * (green) for Meridian 1 /Succession 1000 connection) R
ページ20に含まれる内容の要旨
703t server description Standard 1.04 Part Function IDE CD-ROM drive Enables you to use the CallPilot software and (5.25 in.) documentation CD-ROMs. CD drive eject Opens the CD-ROM drawer. Push the button button again to close the drawer. Backup tape drive Allows backup of hard drive data. Hard drive 1 10,000 rpm hard drive Hard drive 2 10,000 rpm hard drive Drive bay Vacant Drive bay Vacant Drive bay Vacant Air flow slot Must remain empty for proper system cooling. 20 CallPilot
