ページ1に含まれる内容の要旨
Installation and user
SNMP 10BT
manual
communication card
THE MERLIN GERIN KNOW-HOW
Nothing will stop you now
51029486EN/AA - Page 1
ページ2に含まれる内容の要旨
Introduction Thank you for selecting an MGE UPS SYSTEMS product to protect your electrical equipment. The SNMP communication card has been designed with the utmost care. We recommend that you take the time to read this manual to take full advantage of its many features. To discover the entire range of MGE UPS SYSTEMS products, visit our web site at www.mgeups.com or contact your nearest MGE UPS SYSTEMS representative. Environment Recycling of packaging: The packaging has been designed for recycl
ページ3に含まれる内容の要旨
Contents 1. Presentation 1.1 Check on contents ......................................................................................................................................... 4 1.2 Storage ............................................................................................................................................................ 4 1.3 Functions ..............................................................................................................................
ページ4に含まれる内容の要旨
1. Presentation 1.1 Check on contents The product is made up of the items listed below: w A communication card. w Solution-Pac UPS-management software Système de communication Manuel d'installation et d'utilisation "SNMP" on a CD-ROM. w A special front panel for Galaxy PW UPSs. w This installation and user manual. w Three labels with the MAC address of the card. The indispensable companion Solution-Pac sofware for your UPS L'indispensable complément logiciel de votre onduleur 0080C8ZZXX 0080C8ZZ
ページ5に含まれる内容の要旨
1. Presentation 1.3 Functions The SNMP 10BT communication card is an agent for UPS supervision using the SNMP protocol. It provides a number of objects (MIB) on the Ethernet 10BT network and makes it possible for a number of different remote machines to supervise the UPS and protect computer data (orderly system shutdown). It may be used in all UPSs equipped with UPS BUS communications slots or in a MultiSlot module. 1.4 Overview Key: 6 ␣ 1 Red Tx LED: - On: card energised. - Flashing: data em
ページ6に含まれる内容の要旨
I max 3.4A 2. Installation 2.1 Setup Position of the jumper for network-parameter selection 6 : 1 1 Personalised network parameters 2 2 Factory-set network parameters (default position) 3 3 The SNMP communication card may be installed in either: w A UPS (see figure 1). w A MultiSlot module (see figure 2). The front of the card must be secured to the device frame using the two screws provided. It is not necessary to de- energise the device before inserting the card. Figure 1: example of an Fi
ページ7に含まれる内容の要旨
2. Installation w Once the card has been inserted in the device, the red LED 1 on the front goes on, indicating that the card is supplied with power. w When the card connects to the network, the green 2 Lk / Rx LED goes and stays on. w The red Tx LED 2 and the green Lk / Rx LED 2 flash depending on the Ethernet traffic controlled by the SNMP card. w Approximately 45 seconds following card insertion in the device, the card is operational. Special case for Galaxy PW UPSs: w Replace
ページ8に含まれる内容の要旨
2. Installation 2.3 Ethernet connections To take full advantage of the potential card performance, it is advised to use shielded cables equipped with shielded RJ45 connectors. Connection to a hub Straight 10 Base-T cable: If the SNMP card is connected to a hub, use a cable wired straight through. 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 Connection to a computer Crossover 10 Base-T cable: If the SNMP card is directly connected to a computer, use a crossover cable. 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 Page 8 -
ページ9に含まれる内容の要旨
3. Operation 3.1 MAC address - Default IP address The label 7 on the SNMP card and the three other labels indicate the MAC address. The MAC address is made up of six bytes expressed in hexadecimal 0080C8ABAA01 format. The format is 0080C8LLMMNN: w 0080C8 is the manufacturerÕs code (always the same). w LLMMNN is the card serial number (always different). The default IP address of the card is made up of four bytes in which the last two are part of the MAC address. The format is 168.8.xxx.yyy:
ページ10に含まれる内容の要旨
3. Operation 3.3 Personalised network parameters Personalisation may be carried out using the HWConf software from MGE UPS SYSTEMS. It is available on the Solution- Pac CD-ROM that is supplied with the SNMP card (in the Emb/Hwconf directory) or on the www.mgeups.com site. For further information on advanced functions of the SNMP card: w See the HTML documentation in the Emb/Galaxy/Snmp/Rel350/Eng directory on the Solution-Pac CD-ROM by double- clicking the Start.htm file, w See the MGE web site
ページ11に含まれる内容の要旨
4. Troubleshooting The red LED 1 does not go on when the card is inserted: w Check that the UPS or the MultiSlot module are energised. w Remove and reinsert the SNMP communication card. The green LED 2 does not go on when the cable is connected: w Check that the correct type of cable is connected (see section 2.3 Ethernet connections). w Check that the hub or the computer are energised. For further information on any problems that may be encountered with the SNMP card, see the FAQ sectio
ページ12に含まれる内容の要旨
5. Appendices 5.1 Glossary IP address When the TCP/IP protocol is installed on a computer system, that system is assigned a unique address. The address is made up of four numbers, each from 0 to 255. For example, 168.8.156.210. MAC address The physical address of the card expressed in hexadecimal format. The decimal values of the last two bytes represent the last two numbers in the IP address. Agent Software in charge of managing one or more MIBs. The agent for MGE UPSs manages the contents of t
ページ13に含まれる内容の要旨
5. Appendices MultiSlot MGE UPS SYSTEMS module offering a number of functions: - connection of additional cards, - use of other communication protocols, - data concentrator for parallel-connected UPSs. NMS A platform used to manage SNMP devices connected to the TCP/IP network. (Network Management System) This platform is also called a Manager. SNMP Application-level protocol providing network-management services based on the TCP/IP (Simple Network protocol. It enables dialogue between a manger a
ページ14に含まれる内容の要旨
5. Appendices 5.2 Index Address .................................................................... 5, 7, 9 LEDs ...................................................................... 5, 7, 11 MAC ............................................................................. 7, 9 MultiSlot ....................................................................... 5, 6 Personnalisation ............................................................ 10 SNMP ..............................................
