Liebert Network Device EIA-485/232の取扱説明書

ページ1に含まれる内容の要旨

® ™
Liebert SiteTPI-1
Product Specification/Installation Sheet
The Liebert SiteTPI-1 is an ARCnet-ready device intended to
®
interface specifically with a Liebert SiteScan Web system.
It is a 32-bit microprocessor-based device designed to monitor
third-party equipment via an EIA-485/232 interface.
Logically, the device sits on the ARCnet network, providing
the interface to Liebert SiteScan Web. The Liebert SiteTPI-1
converts proprietary equipment data into open protocol data,
enabling a sin

ページ2に含まれる内容の要旨

Power Wiring CAUTION ! The Liebert SiteTPI-1 is a Class 2 device (less than 30VAC, 100VA maximum). Take appropriate isolation measures when mounting the Liebert SiteTPI-1 in a control panel where non-Class 2 devices (for example, 120VAC) or wiring are present. Mounting Screw the Liebert SiteTPI-1 into an enclosed panel using the mounting holes provided on the cover plate. Be sure to leave about 2" (50mm) on each side for wiring. Specifications 24VAC ±15%, 50-60Hz, 20VA power consumption (sing