ページ1に含まれる内容の要旨
CardBus 10/100 TX M56
HYNEP61056
USER GUIDE
Information in this document is subject to change without notice. All
rights reserved. All brand names are registered trademarks of their
respective companies.
ページ2に含まれる内容の要旨
standards. Records maintained by Hypertec continue to reflect that units being produced under this Declaration of Conformity, within the variation that can be expected due to quantity production and tested on a statistical basis, continue to comply with the applicable technical standards. The CardBus Modem 56k Card complies with Part 68 of the FCC rules. FCC rules permit this device to be directly connected to the telephone network, using a standardised jack. Do not use this equipment on
ページ3に含まれる内容の要旨
What to do if interference occurs Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of Subpart B of the FCC Rules. These limits provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate
ページ4に含まれる内容の要旨
©1998 Hypertec, Ltd. All rights reserved.
ページ5に含まれる内容の要旨
PC Card standard compatibility and Plug and Play features are assured with full support of all major operating systems. Compatibility with all major Network Operating Systems is guaranteed by Silicoms wide range of thoroughly tested NOS drivers. The Data/Fax Modem is installed as a COM port and runs an extended AT command set, enabling it to work with all major Fax/Modem software. The video-ready interface supplied by the CardBus 10/100 TX M56 provides videoconferencing capability using traditi
ページ6に含まれる内容の要旨
Automatic sensing and switching between 10 Mbps or 100 Mbps operation Full Duplex. Independent receive and transmit circuits allow full duplex operation at both 10 Mbps and 100 Mbps, allows for maximum throughput of 200 Mbps A single RJ-45 female connector supports both 10 Mbps and 100 Mbps operation Platform independent. Supports all type II CardBus PC Card compliant PCs Easy installation and configuration Wide Network Operating Systems support (Including Windows 98, Windows
ページ7に含まれる内容の要旨
Static Electricity Warning Static electricity is accumulated naturally in the human body, and can be discharged through electrical components by touching them. This shock can potentially cause permanent internal damage to the component. When installing the adapter, please observe the following precautions: Discharge yourself before commencing by touching a grounded metal appliance, such as the metal frame of a computer - while it is tuned off, but still plugged into the wall socket. Hold the ad
ページ8に含まれる内容の要旨
SPECIFICATIONS Interface Standards: 32-bit CardBus PC Card, 3.3V PC Card Software Support: Card and Socket Services Direct Enablers Weight: 92 gr., 3.3 oz (including the media unit) PC Card Size: Length 3.37" (85 mm) Width - 2.13" (54 mm) Thickness - 0.197" (5 mm) Power Consumption: 100BaseTx + Modem active 450mA @ 3.3V (1.49W) 100BaseTx + Modem sleep 290mA @ 3.3V (0.96W) 10BaseT + Modem active 400mA @ 3.3V (1.32W) 10BaseT + Modem sleep 250mA @ 3.3V (0.83W) Operating Temperature: 0!-50
ページ9に含まれる内容の要旨
Fax Rates: CCITT V.17 (14,400 bps) CCITT V.29 (9,600 bps) CCITT V.27ter (4,800 bps) CCITT V.21 channel 2 (300 bps) Video-ready modem interface (VRM): CCITT V.80 Data Compression: CCITT V.42bis (up to 4:1 compression ratio) MNP5 (up to 2:1 compression ratio) Error Correction: CCITT V.42 LAPM MNP 2-4 16550 UART: Enhanced UART interface provides buffering of data. This feature is essential in providing reliable high speed communication, when used in multitasking environments such as Windows or OS/2
ページ10に含まれる内容の要旨
NDIS3 MiniPort driver for Windows 95 County change utility program for various countries Ethernet Media Connections: Unshielded RJ-45 female connector Product Warranty Hypertec Limited warrants the hardware components of the product to be in good working order for the life of the product from the date of purchase of the product from Hypertec or an authorised Hypertec dealer. Should the hardware components of the product fail to be in good working order at any time, Hypertec will, at its option
