ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communications.
ページ3に含まれる内容の要旨
Index TABLE OF CONTENTS Introduction ……………………………….………………………………………...…… 3 Safety Instructions ………………………………………………………………....……. 3 Features ……………………………………….………………………………………….. 3 System Requirements ………………………….………………………………………… 3 Package Contents ……..………………………..………………………………………… 3 Hardware Installation ………..………………..…………………………………………. 4 Software Installation ……………………………..………………………………………. 4 2
ページ4に含まれる内容の要旨
Introduction The Hawking H-UC232S USB Serial Converter operates as a bridge between the USB and standard RS232 Serial port. The cable can easily be connected to a PC or USB Hub. Moreover, this product can connect RS-232 devices or any serial devices with DB 9P connectors, including PDA, scanner, printer and modem. Features Compliant with USB specification Revision 1.1 Supports RS-232 serial interface Supports 500 Kbps data transfer rate USB suspend condition Supports Plug and Pl
ページ5に含まれる内容の要旨
Hardware Installation Software Installation Windows XP 1. Select “Install from a list or specific location [Advanced],” and click “Next” 4
ページ6に含まれる内容の要旨
2. Select “Search removable media (floppy, CD-ROM…), and click “Next” 3. Click “Continue Anyway” 4. The Windows driver file searches for the device. Press “OK.” 5
ページ7に含まれる内容の要旨
5. Click “Browse” and select “CD-ROM drive” as your target drives and click ”OK.” 6. Windows has finished installing the software; click “Finish” to complete installing driver. 6
ページ8に含まれる内容の要旨
6. In “System Properties,” “Device Manager,” “Prolific USB-to Serial Converter Port (COM3)” will appear. NOTE: The Serial Converter doesn’t support interrupt transfer mode devices: EX: KEYBOARD, MOUSE , JOYSTICK ETC. CALL HID DEVICE Windows 98SE 1. Windows will search for a new device, then press ”Next”. 7
ページ9に含まれる内容の要旨
2. Select “Search for the best driver for your device [Recommended],” and press ”Next”. 3. Click “Browse” and select “CD-ROM drive” as your target drives and click ”Next” 8
ページ10に含まれる内容の要旨
4. The Windows driver file will search for the device. Press “Next”. 5. Windows has finished installing the software; click “Finish” to complete installing driver. 9
ページ11に含まれる内容の要旨
6. In “System Properties,” the Device Manager will display “USB to Serial Port (COM3)” and “Prolific USB-to Serial Comm Port.” Once this is displayed, installation is complete. Windows 2000 Click “Next” to start the installation. 10
ページ12に含まれる内容の要旨
Select “Search for the best driver for your device” and click “Next.” Select “CD-ROM drives” and click “Next” to continue. Click “Next” to install the driver for the device. 11
ページ13に含まれる内容の要旨
Click “Finish” to complete the installation. The statement “USB-to-Serial Port (COM3)” should appear in your “Device Manager.” 12
ページ14に含まれる内容の要旨
Windows ME Select “Automatic search for a better driver” and click “Next”. Click “Finish” to complete installation. 13
ページ15に含まれる内容の要旨
These statements: “USB to Serial Port (COM3)” and “Prolific USB-to Serial Bridge” should appear in your “Device Manager.” NOTE: The USB Serial Converter cannot support interrupt transfer mode devices, such as, keyboards, mice, joysticks, etc. Disclaimer Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in n
