Gianni Industries GEM P-MU-EASIPROXの取扱説明書

ページ1に含まれる内容の要旨

EASIPROX
Waterproof Standalone Proximity Reader


EASIPROX EASIPROX-ANSI

I. Product Characteristic:

Easiprox has a 2000 cards capacity and a reading time of 0.5-second max.
Fully Programmable via Master card
Electronics potted with epoxy compound applications
Aesthetic and inconspicuous design
Suitable for fully weatherized indoor/outdoor
Non-volatile memory stores all pr

ページ2に含まれる内容の要旨

III. The indicator signal chart: Signal Condition Yellow Power on, Stand-by User Signals Green Lock relay active Red Invalid Card Yellow 、Green Flashing The memory is empty Green Flashing Into the ADD CARDS MODE Red Flashing Into the DELETE CARDS MODE Programming Yellow 、Red Flashing Into the CLEAR MEMORY MODE Signals Yellow Flashing Into the TIME ADJUST MODE Green Blinking Clearing Memory IV. Wiring diagram: Power Supply Push Button (N.O./Com.) Electric Strike (Fail

ページ3に含まれる内容の要旨

V. Operation Instruction WARNING: Please read all of operation instruction before proceeding. Setting Master Card If the GREEN and YELLOW lamps are flashing, it indicates that the memory is empty and that there is no Master Card. All programming is done by using this Master Card. Add Cards Read the Master Card once → Only the GREEN lamp wills light → Wait for the GREEN lamp to start flashing → The Easiprox is now in the ADD state. In this state every Card presented to the Easipro

ページ4に含まれる内容の要旨

Card Simulator / Programmer (optional) The Card Simulator allows adding and removing any card/card number from the reader memory when the card is lost or not available. One unit can be utilized at different sites but for security reasons it will operate only in conjunction with the Master Card. The Card Simulator / Programmer cannot be used to gain access. It will only operate together with the reader's MASTER card Setting Card Number Hold the On/Off button down. Use the RIGHT A