ページ1に含まれる内容の要旨
CM41-00413-2E
FUJITSU SEMICONDUCTOR
CONTROLLER MANUAL
2
F MC FAMILY
PARALLEL COMMUNICATIONS ADAPTER
MB2142-03
HARDWARE MANUAL
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
2 F MC FAMILY PARALLEL COMMUNICATIONS ADAPTER MB2142-03 HARDWARE MANUAL FUJITSU LIMITED
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
PREFACE n Objectives and Intended Readers The MB2142-03 support tool (parallel communications adapter) is designed to enable the 2 development and evaluation of products based on the F MC* famiy. The MB2142-03 is connected to the main unit (MB2141A). This enables the main unit to perform parallel communication with the host machine (such as a personal computer). This manual describes the handling and connection of the MB2142-03. It is aimed at engineers 2 responsible for the development of prod
ページ6に含まれる内容の要旨
1. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. 2. The information and circuit diagrams in this document are presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this info
ページ7に含まれる内容の要旨
CONTENTS CHAPTER 1 HANDLING AND SPECIFICATIONS OF THE PRODUCT ........................... 1 1.1 Packing List ........................................................................................................................................... 2 1.2 Parallel Communications Adapter Specifications .................................................................................. 4 1.2.1 Electrical Characteristics of I/O Signal Lines ............................................................
ページ8に含まれる内容の要旨
iv
ページ9に含まれる内容の要旨
CHAPTER 1 HANDLING AND SPECIFICATIONS OF THE PRODUCT This chapter explains the handling and specifications of the parallel communications adapter. Read this chapter and check the contents of the package before attempting to use the parallel communications adapter. 1.1 "Packing List" 1.2 "Parallel Communications Adapter Specifications" 1.3 "IF Cable Specifications" 1.4 "Notes on Use" 1
ページ10に含まれる内容の要旨
CHAPTER 1 HANDLING AND SPECIFICATIONS OF THE PRODUCT 1.1 Packing List Before first using the parallel communications adapter, check that the package contains the following components: • Parallel communications adapter x 1 • IF cable x 1 n Appearance and Names of Parts Figure 1.1-1 "Parallel Communications Adapter" illustrates the parallel communications adapter. For details of the connections, see CHAPTER 2 "CONNECTIONS." The function of each part is described below: IF connector: Used to con
ページ11に含まれる内容の要旨
1.1 Packing List Figure 1.1-1 Parallel Communications Adapter 3
ページ12に含まれる内容の要旨
CHAPTER 1 HANDLING AND SPECIFICATIONS OF THE PRODUCT 1.2 Parallel Communications Adapter Specifications Table 1.2-1 "Parallel Communications Adapter Specifications" lists the specifications of the parallel communications adapter. n Parallel Communications Adapter Specifications Table 1.2-1 "Parallel Communications Adapter Specifications" lists the specifications of the parallel communications adapter. Table 1.2-1 Parallel Communications Adapter Specifications Item Contents Name Parallel commu
ページ13に含まれる内容の要旨
1.2 Parallel Communications Adapter Specifications 1.2.1 Electrical Characteristics of I/O Signal Lines Figure 1.2-1 "Electrical Characteristics of I/O Signal Lines" shows the electrical characteristics of the I/O signal lines. n Electrical Characteristics of I/O Signal Lines The signal levels of the I/O signal lines are indicated below. Figure 1.2-1 "Electrical Characteristics of I/O Signal Lines" shows the electrical characteristics. "L": 0 to +0.4 V "H": +2.4 to +5.0 V The power supply s
ページ14に含まれる内容の要旨
CHAPTER 1 HANDLING AND SPECIFICATIONS OF THE PRODUCT 1.2.2 Connector Pin Assignment An Amphenol 36P connector is used as the parallel communications connector. Table 1.2-2 "Parallel Communications Connector Signal Line Names" lists the connector signal line names. n Connector Pin Assignment The model and pin assignment of the connector are described below. • Connector model 57LE-40360-7700 (D12) Manufactured by DDK, or equivalent (Generally referred to as Amphenol 36P) • Connector pin assignme
ページ15に含まれる内容の要旨
1.2 Parallel Communications Adapter Specifications Table 1.2-2 Parallel Communications Connector Signal Line Names No. Signal line I/O Function No. Signal line I/O Function 1DSTB I Data strobe signal 19 GND - Signal grounding 2 DATA 0 I/O Data 20 GND - Signal grounding 3 DATA 1 I/O Data 21 GND - Signal grounding 4 DATA 2 I/O Data 22 GND - Signal grounding 5 DATA 3 I/O Data 23 GND - Signal grounding 6 DATA 4 I/O Data 24 GND - Signal grounding 7 DATA 5 I/O Data 25 GND - Signal grounding 8 DATA 6
ページ16に含まれる内容の要旨
CHAPTER 1 HANDLING AND SPECIFICATIONS OF THE PRODUCT 1.3 IF Cable Specifications Table 1.3-1 "IF Cable Components" lists the IF cable components, Table 1.3-2 "IF Cable General Specifications" lists the general specifications of the IF cable, and Figure 1.3-1 "IF Cable Dimensions" shows the dimensions of the IF cable. n IF Cable Specifications For details of the connection to the main unit, see Section 2.2 "Connection to Main Unit." Table 1.3-1 IF Cable Components Part Name Remarks FCN-237R06
ページ17に含まれる内容の要旨
1.3 IF Cable Specifications Figure 1.3-1 IF Cable Dimensions 9
ページ18に含まれる内容の要旨
CHAPTER 1 HANDLING AND SPECIFICATIONS OF THE PRODUCT 1.4 Notes on Use When using the parallel communications adapter, keep the following notes in mind. n Notes on Use When using the parallel communications adapter, keep the following notes in mind: • Turn off the power before connecting or removing a cable. • To remove a cable, do not pull the cable itself; grasp and pull the connector. • To prevent electrostatic destruction, be careful not to touch the connector pins, and prevent the connector
ページ19に含まれる内容の要旨
CHAPTER 2 CONNECTlONS This chapter describes how to connect, turn on, and turn off the parallel communications adapter. Familiarize yourself with the contents of this chapter before turning on the adapter. 2.1 "System Configuration" 2.2 "Connection to Main Unit" 2.3 "Connection to Host Machine" 2.4 "Power-on Sequence" 2.5 "Power-off Sequence" 11
ページ20に含まれる内容の要旨
CHAPTER 2 CONNECTlONS 2.1 System Configuration Connecting the parallel communications adapter to the host machine enables parallel communication with the host machine. n System Configuration Connecting the parallel communications adapter to the host machine enables parallel communication with the host machine. Figure 2.1-1 "System Configuration" shows the hardware system configuration when using the parallel communications adapter. Figure 2.1-1 System Configuration 12
