ページ1に含まれる内容の要旨
User guide
™
Stereo Bluetooth Headset
SBH20
ページ2に含まれる内容の要旨
Contents Introduction....................................................................................3 Accessory overview.......................................................................4 Basics.............................................................................................5 Charging the battery..........................................................................5 Turning on the headset......................................................................5 Pairing the
ページ3に含まれる内容の要旨
Introduction With the Stereo Bluetooth™ Headset SBH20 you can control incoming and outgoing phone calls while you listen to music in stereo from your phone or from another device. Such a device must support Bluetooth™, for example, a computer or a portable music player. During a call, the music pauses automatically and starts playing again when the call ends. 3 This is an Internet version of this publication. © Print only for private use.
ページ4に含まれる内容の要旨
Accessory overview 1. Volume controls Adjust the volume. 2. NFC detection area Swipe this area during NFC transactions. 3. Clip Attach the accessory to your clothing. 4. Micro USB port Insert the charger cable to charge the battery. 5. Next key Play the next track. 6. Music key/Call key Play/Pause the current media file. Answer incoming calls. Press and hold down to reject incoming calls. 7. Previous key Play the previous track. 8. Power switch Move the switch to turn the power on or off. 9. Not
ページ5に含まれる内容の要旨
Basics Charging the battery Before using the Stereo Bluetooth™ Headset SBH20 for the first time, you need to charge the headset for approximately 2.5 hours. Sony chargers are recommended. To charge the battery 1 Plug the charger into a power outlet. 2 Plug one end of the USB cable into the charger (or into the USB port of a computer). 3 Plug the other end of the cable into the Micro USB port on your Stereo Bluetooth™ Headset SBH20 device. Notification light will display the charging status after
ページ6に含まれる内容の要旨
To manually pair the headset with your phone 1 Make sure your phone has the Bluetooth™ function turned on. 2 Turn on the headset. 3 Headset: Press and hold until the notification light flashes blue. 4 Phone: Scan for Bluetooth™ devices, then select Stereo Bluetooth™ Headset SBH20 in the available devices list. 5 Follow the pairing instructions that appear on your phone. If a passcode is required, enter 0000. To pair the headset with your phone using NFC 1 Make sure that your phone has the NFC f
ページ7に含まれる内容の要旨
Wearing instruction You can rotate the clip left or right for a more comfortable fit. To get the best performance from a Bluetooth™ headset when using it outdoors, it is recommended that you carry your phone on the same side of your body as the headset unit. 7 This is an Internet version of this publication. © Print only for private use.
ページ8に含まれる内容の要旨
Call handling To answer a call with the headset • When you hear an incoming call signal, press . To end a call • During an ongoing call, press . To reject a call • When you hear an incoming call signal, press and hold down . To mute the microphone during a call • Press and hold down . To answer a second call • When you hear an incoming call signal during an ongoing call, press . The ongoing call is put on hold. To reject a second call • When you hear an incoming call signal during an ongoing cal
ページ9に含まれる内容の要旨
Listening to music To listen to music 1 Open the media player in your phone. 2 Press to play the music on the headset. To pause the music, press again. To move between tracks • When you listen to music, press or . To move within a track • Press and hold down or until you reach the desired position. 9 This is an Internet version of this publication. © Print only for private use.
ページ10に含まれる内容の要旨
Multipoint technology Use Multipoint technology to connect your headset to two Bluetooth™ devices at the same time. For example, if you connect your headset with two phones, you can receive calls from both phones without having to disconnect and reconnect. If you prefer that your headset connects to just one Bluetooth™ device at any given time, you can use Singlepoint mode instead. Before pairing your headset with a new device in Singlepoint mode, make sure that you disconnect it from other devi
ページ11に含まれる内容の要旨
Troubleshooting I cannot answer a second call • Make sure your phone supports the Bluetooth handsfree profile. • Make sure the correct calling device is selected. Music does not play in the headset • Make sure your phone or other device is paired with the headset. You may have to restart the media player and select to use the headset. • Make sure the correct music source is selected. The headset turns off automatically • The battery level is too low. The headset beeps approximately 10 minutes be
ページ12に含まれる内容の要旨
Legal information Sony SBH20 Prior to use, please read the Important information leaflet separately provided. This User guide is published by Sony Mobile Communications AB or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Mobile Communications AB at any time and without notice. Such changes will, however, be
ページ13に含まれる内容の要旨
Declaration of Conformity for SBH20 We, Sony Mobile Communications AB of Nya Vattentornet SE-221 88 Lund, Sweden declare under our sole responsibility that our product Sony type RD-0010 and in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards EN 300 328:V1.7.1, EN 301 489-7:V1.3.1, EN 301 489-17:V2.1.1 and EN 60 950-1:2006 +A11:2009+A1:2010+A12:2011 following the provisions of, Radio Equipment and Telecommunication Terminal Equipm
