ページ1に含まれる内容の要旨
OWNER’S MANUAL
Network 3D
Blu-ray Disc™ / DVD Player
Please read this manual carefully before operating
your set and retain it for future reference.
BP325 / BP325N
P/NO : MFL67475851_1.0
ページ2に含まれる内容の要旨
Getting Started 2 Getting Started Safety Information CAUTION Use of controls, adjustments or the performance of 1 RISK OF ELECTRIC SHOCK procedures other than those specified herein may DO NOT OPEN result in hazardous radiation exposure. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO CAUTION concerning the Power Cord USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Most appliances recommend they be placed upon a dedicated ci
ページ3に含まれる内容の要旨
Getting Started Getting Started 3 This device is equipped with a portable battery or Disposal of waste batteries/accumulators accumulator. 1. When this crossed-out wheeled Safety way to remove the battery or the bin symbol is attached to batteries/ battery from the equipment: Remove the accumulators of Your product it means old battery or battery pack, follow the steps they are covered by European Directive 1 in reverse order than the assembly. To prevent 2006/66/EC. contamination of the envi
ページ4に含まれる内容の要旨
Getting Started 4 Getting Started LG Electronics hereby declares Notes on Copyrights that this/these product(s) is/are y Because AACS (Advanced Access Content in compliance with the essential System) is approved as content protection requirements and other relevant provisions of system for Blu-ray Disc format, similar to use of Directive 2004/108/EC, 2006/95/EC and 2009/125/ 1 CSS (Content Scramble System) for DVD format, EC. certain restrictions are imposed on playback, European Standa
ページ5に含まれる内容の要旨
Getting Started Getting Started 5 Important Notice for TV colour system The colour system of this player differs according to currently playing discs. 1 For example, when the player plays the disc recorded in the NTSC colour system, the image is output as an NTSC signal. Only the multi system colour TV can receive all signals output from the player. y If you have a PAL colour system TV, you will see just distorted images when using discs or video contents recorded in NTSC. The multi syst
ページ6に含まれる内容の要旨
6 Table of Contents 3 System Setting Table of Contents 24 Settings 24 – Initial Setup 25 – Adjust the setup settings 1 Getting Started 25 – [DISPLAY] Menu 27 – [LANGUAGE] Menu 2 Safety Information 27 – [AUDIO] Menu 8 Introduction 29 – [LOCK] Menu 8 – Playable discs and symbols used in 30 – [NETWORK] Menu this manual 30 – [OTHERS] Menu 9 – About the “7” symbol display 9 – Compatibility notes 10 – File requirement 4 Operating 11 – AVCHD (Advanced Video Codec High 32 General Playback Definition
ページ7に含まれる内容の要旨
Table of Contents 7 5 Troubleshooting 43 Troubleshooting 43 – General 44 – Network 1 45 – Picture 45 – Customer support 45 – Open source software notice 2 6 Appendix 46 Controlling a TV with the supplied remote control 46 – Setting up the remote to control your 3 TV 47 Network software update 47 – Network update notification 47 – Software update 49 Area code list 4 50 Language code list 51 Trademarks and licenses 53 Audio output specifications 55 Specifications 56 Maintenance 5 56 – Handling
ページ8に含まれる内容の要旨
Getting Started 8 Getting Started Introduction 1 Playable discs and symbols used in this manual Media/Term Logo Symbol Description y Discs such as movies that can be purchased or rented. e y “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs. BD-R/RE discs that are recorded in BDAV format. y Blu-ray y BD-R/RE discs that contain Movie, Music or y Photo files. u y ISO 9660+JOLIET, UDF and UDF Bridge format i Discs such as movies that can be purchased or y rented. r Movie mode and finalized on
ページ9に含まれる内容の要旨
Getting Started Getting Started 9 Note , About the “7” symbol display y Depending on the conditions of the “7” may appear on your TV display during recording equipment or the CD-R/RW (or operation and indicates that the function explained DVD±R/RW) disc itself, some CD-R/RW (or in this owner’s manual is not available on that DVD±R/RW) discs cannot be played on the 1 specific media. unit. Depending on the recording software & the y finalization, some recorded discs (CD-R/RW, Compatibili
ページ10に含まれる内容の要旨
Getting Started 10 Getting Started File requirement Movie files 1 File File Codec Format Audio Format Subtitle Location Extension “.avi”, “.divx”, DIVX3.xx, DIVX4.xx, Dolby Digital, SubRip (.srt / .txt), SAMI (.smi), “.mpg”, “.mpeg”, DIVX5.xx, DIVX6.xx DTS, MP3, SubStation Alpha (.ssa/.txt), “.mkv”, “.mp4”, (standard playback WMA, AAC, MicroDVD (.sub/.txt), VobSub Disc, “.asf ”, “.wmv”, only), XVID, MPEG1 SS, AC3 (.sub), SubViewer 1.0 (.sub), USB “.m4v” (DRM H.264/MPEG-4 AVC, SubViewer
ページ11に含まれる内容の要旨
Getting Started Getting Started 11 Note Note , , y The file name is limited to 180 characters. y A “avi” file which is encoded “WMV 9 codec” is not supported. y Maximum files/Folder: Less than 2000 (total number of files and folders) y This player supports UTF-8 files even it 1 contains Unicode subtitle contents. This y Depending on the size and number of the player can not support the pure Unicode files, it may take several minutes to read the subtitle files. contents on the media. De
ページ12に含まれる内容の要旨
Getting Started 12 Getting Started Certain system requirements Regional code For high definition video playback: This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD High definition display that has HDMI input jack. y discs labelled same as the rear of the unit or “ALL”. 1 y BD-ROM disc with high definition content. y HDMI or HDCP capable DVI input on your display System select device is required for some content (as specified by disc authors)
ページ13に含まれる内容の要旨
Getting Started Getting Started 13 Remote control • • • • • • a • • • • • • • • • • • • d • • • • • 1 (POWER): Switches the player REPEAT (h): Repeats a desired 1 ON or OFF. section or sequence. B (OPEN/CLOSE): Opens and AUDIO ([): Selects an audio closes the disc tray. language. 0-9 numerical buttons: Selects SUBTITLE (]): Selects a subtitle numbered options in a menu. language. CLEAR: Removes a number when TITLE/POP-UP: Displays the DVD setting the password. title menu or BD-RO
ページ14に含まれる内容の要旨
Getting Started 14 Getting Started Front panel 1 a Disc Tray d B (OPEN / CLOSE) b Display Window e 1 (POWER) c Remote Sensor f USB Port Rear panel a DC IN 12V (AC adapter input) c HDMI OUT b LAN port d DIGITAL AUDIO OUT (COAXIAL)
ページ15に含まれる内容の要旨
Connecting Connecting 15 Connecting the AC Connecting to your TV adapter If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High Connect the unit to the power supply with the Speed HDMI™ Cable). Connect the HDMI jack on supplied AC adapter. the player to the HDMI jack on a HDMI compatible TV or monitor. Rear of the unit Rear of the unit 2 HDMI cable TV Plug into a power source. y Contact an electrical parts distributor for assistance in selec
ページ16に含まれる内容の要旨
Connecting 16 Connecting Additional information for HDMI What is SIMPLINK? y When you connect a HDMI or DVI compatible device make sure of the following: Some functions of this unit are controlled by the - Try switching off the HDMI/DVI device and TV’s remote control when this unit and LG TV’s with this player. Next, switch on the HDMI/DVI SIMPLINK are connected through HDMI connection. device and leave it for around 30 seconds, then switch on this player. Controllable functions by LG TV’s
ページ17に含まれる内容の要旨
Connecting Connecting 17 Note , Resolution setting y If your TV does not accept the resolution The player provides several output resolutions for you have set on the player, you can set HDMI OUT jack. You can change the resolution resolution to 576p as follows: using [Setup] menu. 1. Press B to open the disc tray. 1. Press HOME ( ). n 2. Press Z (STOP) for more than 5 seconds. 2. Use a/d to select the [Setup] and press ENTER When you set the resolution to 576i with y ( ). The [Setup] men
ページ18に含まれる内容の要旨
Connecting 18 Connecting Connecting to an amplifier via Connecting to an HDMI output amplifier Connect the player’s HDMI OUT jack to the corresponding in jack on your amplifier using a Make one of the following connections, depending HDMI cable. on the capabilities of your existing equipment. y HDMI audio connection Rear of the unit Digital audio connection (page 19) y Since many factors affect the type of audio output, 2 see “Audio output specifications” for details (pages 53). About
ページ19に含まれる内容の要旨
Connecting Connecting 19 Connecting to an amplifier via digital audio output Connect the player’s COAXIAL OUT jack to the corresponding in jack on your amplifier using an optional digital audio cable. Rear of the unit 2 Coaxial cable Receiver/Amplifier You will need to activate the player’s digital output. (See “[AUDIO] Menu” on pages 27.)
ページ20に含まれる内容の要旨
Connecting 20 Connecting Connecting to your Broadband home network service This player can be connected to a local area network (LAN) via the LAN port on the rear panel. By connecting the unit to a broadband home network, you have access to services such as software updates, BD-Live interactivity and on-line 2 content services. Router Wired network connection Using a wired network provides the best performance, because the attached devices connect directly to the network and are not sub
