AMX Mini-PCI Wireless Card NXA-PCI80211Gの取扱説明書

ページ1に含まれる内容の要旨

Installation Guide
NXA-PCI80211G Mini-PCI Wireless Card
For more detailed installation, operation, and firmware setup instructions, refer to Step 1: Remove the existing NXT Outer Housing
the 1200V-Series & VG-Series Modero Touch Panels instruction manuals
1. Carefully detach all connectors from the rear of the touch panel and then
available on-line at www.amx.com.
gently place the touch panel LCD facedown onto a soft cloth to expose the
under-side of the base (FIG. 2). This step helps preven

ページ2に含まれる内容の要旨

NXA-PCI80211G Installation into Modero NXD Panels Upgrading the 802.11g card within a WallMount panel involves removing the rear plastic outer housing (back box), installing the new 802.11g wireless card, Antenna connectors and then placing the back box back onto the NXD panel, as described below. Step 1: Removing the existing NXD Outer Housing 1. Carefully detach all connectors from the side of the touch panel and remove the front magnetic faceplate from the NXD unit by firmly gripping the