ページ1に含まれる内容の要旨
TRACER 6000 SERIES
Integrated System Manual
12806410L2A TRACER 6410 2.4 GHz (High Power) System (Plan A)
12806410L2B TRACER 6410 2.4 GHz (High Power) System (Plan B)
12806420L1A TRACER 6420 5.8 GHz System (Plan A)
12806420L1B TRACER 6420 5.8 GHz System (Plan B)
12806420L2A TRACER 6420 5.8 GHz (High Power) System (Plan A)
12806420L2B TRACER 6420 5.8 GHz (High Power) System (Plan B)
612806420L1-1F
November 2005
ページ2に含まれる内容の要旨
Trademarks TRACER 6000 Series Integrated System Manual Trademarks Any brand names and product names included in this manual are trademarks, registered trademarks, or trade names of their respective holders. To the Holder of the Manual The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change the contents without prior notice. In no event will ADTRAN be liable for any special, incidental, or consequential damages or for commercial losses even i
ページ3に含まれる内容の要旨
TRACER 6000 Series Integrated System Manual Revision History Revision History Document Date Description of Changes Revision A December 2004 Initial release of manual to include the TRACER 6420 (5.8 GHz integrated system) and the Quad T1 and Ethernet Switch modules. B March 2005 Include E1 and E1 breakout panel information and add new RF link management bridge functionality. Update the Troubleshooting Guide to include E1 information. C June 2005 Added new real-time power reporting and support
ページ4に含まれる内容の要旨
Safety Instructions TRACER 6000 Series Integrated System Manual Safety Instructions When using your telephone equipment, please follow these basic safety precautions to reduce the risk of fire, electrical shock, or personal injury: 1. Do not use this product near water, such as a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. 2. Avoid using a telephone (other than a cordless-type) during an electrical storm. There is a remote risk of shock from lig
ページ5に含まれる内容の要旨
TRACER 6000 Series Integrated System Manual FCC-Required Information FCC-Required Information Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
ページ6に含まれる内容の要旨
FCC-Required Information TRACER 6000 Series Integrated System Manual FCC Output Power Restrictions The FCC does not require licensing to implement this device. License-free operation in the industrial, scientific, and medical band is documented in FCC Rules Part 15.247. It is the responsibility of the individuals designing and implementing the radio system to ensure compliance with any pertinent FCC Rules and Regulations. This device must be professionally installed. The FCC specifies the ma
ページ7に含まれる内容の要旨
TRACER 6000 Series Integrated System Manual Warranty and Customer Service Information Warranty, Customer Service, Product Support Information, and Training ADTRAN will repair and return this product within the warranty period if it does not meet its published specifications or fails while in service. Warranty information can be found at www.adtran.com/warranty. A return material authorization (RMA) is required prior to returning equipment to ADTRAN. For service, RMA requests, training, or mor
ページ8に含まれる内容の要旨
Warranty and Customer Service Information TRACER 6000 Series Integrated System Manual Post-Sale Support Your reseller should serve as the first point of contact for support. If additional support is needed, the ADTRAN Support website provides a variety of support services such as a searchable knowledge base, updated firmware releases, latest product documentation, service request ticket generation and trouble-shooting tools. All of this, and more, is available at: http://support.adtran.com Wh
ページ9に含まれる内容の要旨
TRACER 6000 Series Integrated System Manual Table of Contents Table of Contents Section 1 System Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 This section of ADTRAN’s TRACER 6000 Series Integrated System Manual is designed for use by network engineers, planners, and designers for overview information about the TRACER 64x0 systems. Section 2 Microwave Path Engineering Basics . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Explains the bas
ページ10に含まれる内容の要旨
Table of Contents TRACER 6000 Series Integrated System Manual 10 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F
ページ11に含まれる内容の要旨
SYSTEM DESCRIPTION This section of ADTRAN’s TRACER 6000 Series Integrated System Manual is designed for use by network engineers, planners, and designers for overview information about the TRACER 64x0 systems. It contains general information and describes physical and operational concepts, network relationships, provisioning, testing, alarm status, and system monitoring. This section should be used in conjunction with Section 3, Engineering Guidelines, of this manual. CONTENTS System Overview
ページ12に含まれる内容の要旨
Section 1 System Description TRACER 6000 Series Integrated System Manual 1. SYSTEM OVERVIEW The TRACER 64x0 provides license-free scalable connectivity for service providers and corporate networks. These radios feature two modular network interface ports that can accommodate various combinations of T1, E1, and Ethernet option cards up to 8xT1/E1 (16.384 Mbps). This flexibility provides customized time division multiplexed (TDM) and packet solutions for voice and data applications in a singl
ページ13に含まれる内容の要旨
TRACER 6000 Series Integrated System Manual Section 1 System Description • Point-to-point transmission, up to 30 miles • 1U high unit for easy rack mounting Available Interface Modules • Quad T1 Module (P/N 1280040L1) • Quad E1 Module with 120Ω Interface (P/N 1280044L1) • Quad E1 Module with 75Ω Interface (P/N 1280044L2) • Quad Ethernet Switch Module (P/N 1280050L1) E1 Network Module with 120Ω Interface • Four E1 circuits provided through four RJ-45 connectors • Complies with CCITT G.703, G.704
ページ14に含まれる内容の要旨
Section 1 System Description TRACER 6000 Series Integrated System Manual 14 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F
ページ15に含まれる内容の要旨
MICROWAVE PATH ENGINEERING BASICS Explains the basics of analyzing a wireless microwave link or path. Defines significant parameters and makes several installation recommendations. CONTENTS Line-of-Sight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Decibels . .
ページ16に含まれる内容の要旨
Section 2 Microwave Path Engineering Basics TRACER 6000 Series Integrated System Manual 1. LINE-OF-SIGHT The TRACER 6410 and TRACER 6420 systems are designed for operation in the license-free 2.400 to 2.483 GHz and 5.725 GHz to 5.850 GHz industrial, scientific, and medical (ISM) bands, respectively. Radio wave propagation in these bands exhibits microwave characteristics which are ideally suited for point-to-point, line-of-sight communications. Line-of-sight requires that the transmitting an
ページ17に含まれる内容の要旨
TRACER 6000 Series Integrated System Manual Section 2 Microwave Path Engineering Basics where the variables in the equations are defined as P received power (dBm) R P receiver sensitivity (dBm) sens P transmitted power (adjustable up to 20, 24, or 27 dBm maximum – depending on product) T G transmit antenna gain (decibels referenced to an isotropic source – dBi) T G receive antenna gain (dBi) R L other losses (RF coaxial cable, etc. – dB) L path loss (dB) P Higher levels of fade margin indi
ページ18に含まれる内容の要旨
Section 2 Microwave Path Engineering Basics TRACER 6000 Series Integrated System Manual Figure 1 illustrates a wireless link configuration containing all the parameters necessary for the power budget analysis. λ G G T R d, L P L L P P T R Figure 1. Example Microwave Path with Parameters The following sections further discuss the power budget analysis and its components. Antenna Gain Actual transmit and receive antenna gain values depend strictly upon the physical characteristics of the ante
ページ19に含まれる内容の要旨
TRACER 6000 Series Integrated System Manual Section 2 Microwave Path Engineering Basics Table 1. Antenna Gain for Given Dish Diameters with k = 0.55 (Standard) Dish Diameter Gain at 2.4 GHz Gain at 5.8 GHz (in feet) (in dBi) (in dBi) 2 21.1 28.8 4 27.2 34.8 6 31.7 38.3 8 33.2 40.8 10 35.2 42.7 12 36.7 44.3 Table 2. Antenna Gain for Given Dish Diameters with k = 0.55 (Metric) Dish Diameter Gain at 2.4 GHz Gain at 5.8 GHz (in meters) (in dBi) (in dBi) 0.6 21.0 28.6 0.8 23.5 31.1 1.0 25.5 33.1
ページ20に含まれる内容の要旨
Section 2 Microwave Path Engineering Basics TRACER 6000 Series Integrated System Manual Transmitted Power (P ) T The FCC specifies the maximum transmitter power used for antennae of a given gain. FCC Rules Part 15, Subpart 247 allow for a maximum power of 1 watt (30 dBm) into antennae of a gain less than or equal to 6 dBi. At 2.4 GHz (TRACER 6410), the 1-watt maximum transmitter power must be reduced by 1 dB for every 3 dB of antenna gain over 6 dBi. This rule is shown in Table 5. Table 5.
