ページ1に含まれる内容の要旨
R
USER’S GUIDE
AUA-3020
DUOCONNECT ADAPTER
ページ2に含まれる内容の要旨
Copyright © 2001-2002 Adaptec, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of Adaptec, Inc., 691 South Milpitas Blvd., Milpitas, CA 95035. Trademarks Adaptec and the Adaptec logo are trademarks of Adaptec, Inc., which may be registered in some jurisdictions. Windows 98, Windows 2000, Windows Me,
ページ3に含まれる内容の要旨
Adaptec Customer Support If you have questions about installing or using your Adaptec product, check this document first—you will find answers to most of your questions here. If you need further assistance, use the support options listed below. Technical Support Identification (TSID) Number ■ Before contacting Technical Support, you need your unique 12-digit TSID number. The TSID number identifies your product and support status. ■ The TSID number is included on two white, bar-coded labels, l
ページ4に含まれる内容の要旨
Limited 5-Year Hardware Warranty 1. Adaptec, Inc. (“Adaptec”) warrants to the purchaser of this product that it will be free from defects in material and workmanship for a period of five (5) years from the date of purchase. If the product should become defective within the warranty period, Adaptec, at its option, will repair or replace the product, or refund the purchaser’s purchase price for the product, provided it is delivered at the purchaser’s expense to an authorized Adaptec service fa
ページ5に含まれる内容の要旨
Adaptec Software License Agreement PLEASE READ CAREFULLY: THE USE OF THIS SOFTWARE IS SUBJECT TO THE SOFTWARE LICENSE TERMS OF ADAPTEC, INC. AND OTHER LICENSORS WHOSE SOFTWARE MAY BE BUNDLED WITH THIS PRODUCT. BY YOUR USE OF THE SOFTWARE INCLUDED WITH THIS PRODUCT YOU AGREE TO THE LICENSE TERMS REQUIRED BY THE LICENSOR OF THAT SOFTWARE, AS SET FORTH DURING THE INSTALLATION PROCESS. IF YOU DO NOT AGREE TO THE LICENSE TERMS APPLICABLE TO THE SOFTWARE, YOU MAY RETURN THE ENTIRE UNUSED PRODUC
ページ6に含まれる内容の要旨
7. Limited Warranty. Adaptec and its Licensor warrant only that the media upon which the Software is furnished will be free from defects in material or workmanship under normal use and service for a period of thirty (30) days from the date of delivery to you. ADAPTEC AND ITS LICENSORS DO NOT AND CANNOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE OR DOCUMENTATION. THE FOREGOING STATES THE SOLE AND EXCLUSIVE REMEDIES ADAPTEC AND ITS LICENSORS WILL PROVIDE FOR BREA
ページ7に含まれる内容の要旨
Regulatory Compliance Statements Federal Communications Commission Radio Frequency Interference Statement WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference
ページ8に含まれる内容の要旨
Canadian Compliance Statement This Class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Japanese Compliance (Voluntary Control Council Initiative) This equipment complies to class B Information Technology equipment based on VCCI (Voluntary Control Council for Interface). This equipment is designed for home use but it ma
ページ9に含まれる内容の要旨
In this Guide Getting Started 2 Installing the DuoConnect Adapter 3 Installing the Device Drivers 5 Connecting USB Devices 31 Troubleshooting 34 The DuoConnect adapter is a 32-bit, 33-MHz PCI adapter and works in any 2.1 or later PCI slot. It enables you to connect USB 1.1 (OHCI), USB 2.0 (EHCI), and FireWire (IEEE 1394) devices to your PC-compatible or Macintosh computer. USB 2.0 is the fastest USB standard, capable of transferring data at up to 480 megabits per second. USB 2.0 devices are
ページ10に含まれる内容の要旨
Getting Started Getting Started Kit Contents ■ DuoConnect adapter ■ FireWire cable (6-foot/1.8 meter, 6-to-4-pin FireWire cable used to connect digital video cameras) ■ Printed Adaptec DuoConnect Installation Guide ■ DuoConnect CD containing device drivers, software, and documentation System Requirements In order to use the DuoConnect adapter, you need ■ One of the following types of computers: ■ Windows XP, Windows 2000, Windows Me, or Windows 98SE computer with a 200-MHz (or faster) proces
ページ11に含まれる内容の要旨
Installing the DuoConnect Adapter Installing the DuoConnect Adapter 1 Discharge any static electricity from your body by touching a grounded metal object (such as the exposed metal parts on the back of your computer). 2 Turn off power to the computer and disconnect the power cord. 3 Open the computer cabinet. See your computer documentation for specific instructions, if needed. 4 Locate an unused 32-bit or 64-bit PCI expansion slot and remove the expansion slot cover. Save the cover screw f
ページ12に含まれる内容の要旨
Installing the DuoConnect Adapter 5 Insert the DuoConnect adapter in a PCI expansion slot and press down firmly until the adapter clicks into place. Then, replace the slot cover screw. When installed properly, the adapter should be level with the expansion slot. 6 Close the computer cabinet and reattach the power cord. Then, power on your computer. 4
ページ13に含まれる内容の要旨
Installing the Device Drivers Installing the Device Drivers The DuoConnect adapter contains the four controllers: Controller Number of Type Controllers Description USB 1.1 2 NEC USB OHCI-compliant USB 2.0 1 Adaptec AUA-3020 PCI to USB EHCI-compliant FireWire 1 Texas Instruments OHCI-compliant IEEE 1394 When successfully installed, these controllers are displayed separately in the Windows Device Manager. To install the device drivers for these controllers, follow the instructions provided f
ページ14に含まれる内容の要旨
Installing the Device Drivers Installing on Windows Computers After you install the DuoConnect adapter and power on your computer, Windows recognizes the new hardware and automatically opens the Found New Hardware Wizard. Note: It may take longer than usual for your system to start because the operating system is locating the new drivers. To complete the driver installation, follow the instructions for your Windows operating system: ■ For Windows XP, see page 7. ■ For Windows 2000, see page
ページ15に含まれる内容の要旨
Installing the Device Drivers Windows XP Note: You must be logged on as Administrator or have administrator privileges to install the DuoConnect adapter on Windows XP. To complete the driver installation: 1 When the Found New Hardware Wizard opens, select Install from a list or specific location..., then select Next. 7
ページ16に含まれる内容の要旨
Installing the Device Drivers 2 Select Don’t search, I will choose the driver to install, then click Next. 3 Click Next again. 4 Click Have Disk. 5 Insert the Adaptec DuoConnect CD into the CD-ROM drive. Type the drive letter for your CD-ROM drive in the Copy manufacturer’s files from box, as shown below, and click OK. Note: Your CD-ROM drive may have a different drive letter than the one shown in the example above. 8
ページ17に含まれる内容の要旨
Installing the Device Drivers 6 On the next screen, click Continue Anyway. Note: Adaptec drivers have been fully tested and certified to work with the AUA-3020 DuoConnect adapter. 7 When the installation is complete, click Finish. 8 If you are prompted to restart the computer, click Yes. 9
ページ18に含まれる内容の要旨
Installing the Device Drivers 9 To verify that the driver is installed, right-click the My Computer desktop icon, select Properties, click the Hardware tab, then click the Device Manager button. Expand Universal Serial Bus controllers and verify that the information shown below appears. FireWire controller USB 2.0 controller (see note) USB 1.1 controllers Note: USB 2.0 controller – Your controller is identified by its model number, which may differ from the model number shown in this User’
ページ19に含まれる内容の要旨
Installing the Device Drivers Windows 2000 Note: You must be logged on as Administrator or have administrator privileges to install the DuoConnect adapter on Windows 2000. To complete the driver installation: 1 When the Found New Hardware Wizard opens, insert the DuoConnect CD in your CD-ROM drive, then click Next. 11
ページ20に含まれる内容の要旨
Installing the Device Drivers 2 In the Install Hardware Device Drivers window, select Search for a suitable driver for my device..., and click Next. 3 In the Locate Driver Files window, uncheck all options except CD-ROM drives, and click Next. 12
