ページ15に含まれる内容の要旨
Enter the CD-ROM driver letter followed by driver\Win_ME. 8. Click Next. 9. Click Next to proceed. - 12 -
ページ16に含まれる内容の要旨
10. Click Finish to complete the software installation. Note: Windows ME users who experience low connection speeds to their Internet provider can apply a driver update to improve speeds. To do this, insert the modem driver CD, (you will need to press Exit when the PICShell software installation utility starts). Click on Start, Programs, Windows Explorer. Now explore the CD-ROM by opening the Driver folder, then Win_Me_faster. Double-click on Driver_update.exe, this will lea
ページ17に含まれる内容の要旨
2. Load the device driver compact disk in the CD-ROM drive. 3. Start Windows NT. 4. Go to My Computer. 5. Click the CD-ROM drive. Click the driver\winnt folder. Or you may click the Browse button to select the CD-ROM drive and the driver\winnt folder. 6. Double-click setup.exe. The installation program will proceed automatically. Windows XP Installation Restart the computer system after the modem is well inserted into the PCI slot of your computer. Windows XP will automaticall
ページ18に含まれる内容の要旨
3. Click OK to install the driver. 4. Go to Start Run, enter “regedit”, and click OK. 5. Select HKEY_LOCAL_MACHINE, and click SOFTWARE to expand. If the Lucent and Modem are listed as below, the modem exists and is successfully enabled. If not, consult your distributor for the technical support. - 15 -
ページ19に含まれる内容の要旨
- 16 -
ページ1に含まれる内容の要旨
Internal
Fax Modem 56K
Quick Installation Guide
M73-APO02-320
ページ2に含まれる内容の要旨
FCC REGULATORY STATEMENTS FCC Part 68 Registration This device complies with FCC Part 68 rules, and the use of this device is subject to the following restrictions: 1. The FCC has established rules which permit this device to be directly connected to the telephone network. Standardized jacks are used for these connections. This equipment should not be used on party lines or coin phones. 2. If this device is malfunctioning, it may also be causing harm to the telephone network;
ページ3に含まれる内容の要旨
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interf
ページ4に含まれる内容の要旨
HARDWARE INSTALLATION Precautions: Please be sure you take adequate anti-static precautions when handling this product. The simplest way to achieve this is; before you begin and every minute or so during the hardware installation touch a non-painted surface of the computer’s chassis. 1. Before installing the device, make sure the computer is turned off. 2. Remove the expansion slot cover from the computer. 3. Carefully slide the PCI modem card into an available PCI slot, push i
ページ5に含まれる内容の要旨
SOFTWARE INSTALLATION Windows 98 Installation 1. Restart the computer system after the modem is correctly plugged into the PCI slot of your computer. Windows will automatically detect the device. Click Next. 2. When the following dialog box appears, insert the device driver compact disc into your CD-ROM drive and click Next. 3. Select Specify a location and press Browse to choose the folder driver/win98 in your CD-ROM drive. Then click Next. - 2 -
ページ6に含まれる内容の要旨
4. Click Next to continue. 5. When the following figure appears, click Finish. The Installation program will continue. - 3 -
ページ7に含まれる内容の要旨
6. Follow the on-screen instructions to proceed. 7. The program will proceed automatically. Click Finish to complete software installation. Windows 2000 Installation Restart the computer system after the modem is properly plugged into the PCI slot of your - 4 -
ページ8に含まれる内容の要旨
computer. Windows 2000 will automatically detect the device. If you want to use the Microsoft built-in driver, execute d:\Driver\Win2000\PAR.exe (assume that d: is your CD-ROM drive). Or you may update the device driver with the utility provided by the manufacturer. 1. Go to Control Panel, double-click System. Select Hardware. Click Device Manager. 2. Right-click LT Win Modem. Select Properties. - 5 -
ページ9に含まれる内容の要旨
3. Select Driver. Click the Update Driver…button. 4. Follow the on-screen instructions to proceed. (Click Next to continue.) 5. Load the Compact Disc that contains the device driver into your CD-ROM drive. Click Browse and select the proper file - 6 -
ページ10に含まれる内容の要旨
location with the disc drive followed by Driver\Win2000. 6. Check Install one of the other drivers. Click Next. 7. Select d:\Driver\Win2000\ltmdmnt.inf, click Next. - 7 -
ページ11に含まれる内容の要旨
8. When Windows prompt you to continue the installation. Select Yes. 9. Click Finish to complete the software installation. Windows ME Installation Restart the computer system after the modem is properly plugged into the PCI slot of your computer. Windows ME will automatically detect the device. If you want to use the - 8 -
ページ12に含まれる内容の要旨
Microsoft built-in driver, execute d:\Driver\WinME\PAR.exe (assume that d: is your CD-ROM drive). Or you may update the device driver with the utility provided by the manufacturer. 1. Right-click My Computer, then click Properties Device Manager. 2. Click WDM Modem Enumerator to expand. 3. Load the device driver into your CD-ROM drive. Click Properties Driver Update Driver. - 9 -
ページ13に含まれる内容の要旨
4. Select Specify the location of the driver (Advanced) and click Next. - 10 -
ページ14に含まれる内容の要旨
5. Select Display a list of all the drivers…and click Next. 6. Click the Have Disk…button. 7. Click Browse to select the drive where the device driver exists. (for example: D:\) - 11 -
