ページ1に含まれる内容の要旨
3M Telecommunications
Solutions for Networks
3M™ Hot Melt Fibre Optic
Connectors, Kits and Accessories
Innovation
ページ2に含まれる内容の要旨
3M™ Hot Melt Connectors are among the most popular with contractors because of their reliability and ease of use. They come pre-loaded with an adhesive that is not limited in shelf life, and the termination procedure provides the ability to reheat and reposition the fibre in the termination process. This easy- to-install field mount connector provides reliable performance in indoor and outdoor applications and has no internal splice. All 3M™ Hot Melt connectors can be terminated using the sam
ページ3に含まれる内容の要旨
FEATURES AND BENEFITS 3M™ HOT MELT CONNECTORS – LC, ST, SC, FC Meets ISO 11801, EN 50173 and EIA/TIA 568-B.3 standards for indoor Long term reliability and outdoor applications Ease of use on backbone and horizontal cable Quick termination in <2 minutes; high yield Allows custom length cable assemblies to be built on site Enhances cable management in telecom room or central office Minimizes cable slack Adhesive fibre retention Not dependent on mechanical retention alone 3M field polishing process
ページ4に含まれる内容の要旨
3M™ ST Hot Melt Connector 48,8 mm 2,9 mm 9,7 mm 10,4 mm 2,498 mm 3M™ SC Hot Melt Connector 56,4 mm 2,9 mm 8,9 mm 50,27 mm 24,6 mm 2,498 mm 48,46 mm 28,78 mm 4,47 mm 7,4 mm 10,67 mm 3M™ FC Hot Melt Connector 58,9 mm 2,9 mm 12,57 mm 6,25 mm 9,1 mm 2,498 mm 3M™ LC Hot Melt Connector 50,27 mm 37,50 mm 35,70 mm 48,46 mm 28,78 mm 4,47 mm 4,47 mm 10,67 mm 10,67 mm LC UNIBODY DUPLEX CONNECTOR ASSEMBLIES LC UNIBODY DUPLEX CONNECTOR ASSEMBLIES WITH JACKETED CABLE BOOT WITH UNJACKETED CABLE BOOT
ページ5に含まれる内容の要旨
ORDERING INFORMATION - 3M™ HOT MELT CONNECTORS PRODUCT NUMBER DESCRIPTION MOQ PACKAGING 3M™ LC Connectors 6600-S MM hot melt simplex 900 BTW, white boot 60 1/bag, 60/carton 6602-S MM hot melt simplex 1.6-2.0 cable, white boot 60 1/bag, 60/carton 6603-S MM hot melt simplex 2.4-3.0 cable, white boot 60 1/bag, 60/carton 6601-D MM hot melt duplex 900 buffer, white/beige boots 60 1/bag, 60/carton 6602-D MM hot melt duplex 1.6-2.0 cable, white/beige boots 60 1/bag, 60/carton 6603-D MM hot melt duplex
ページ6に含まれる内容の要旨
3M™ HOT MELT TERMINATION KITS The 3M™ Hot Melt Termination Kits 6365 (120V oven) and 6361 (230V oven) contain all materials necessary to terminate 3M SC, ST, and FC hot melt, both singlemode and multimode. An LC expansion kit 6650-LC makes it easy to incorporate the LC Hot Melt process into one kit. 3M™ Hot Melt Termination Kits 6365 and 6361 FEATURES AND BENEFITS Improved microscope with oblique and coaxial lighting Better view of fibre end face inspection Roll-up tool pouch Tools are orga
ページ7に含まれる内容の要旨
3M™ HOT MELT TERMINATION KITS 6365/6361 CONTENTS PRODUCT NUMBER DESCRIPTION CONTENTS QTY REPLACEMENT MOQ PACKAGING 6312 120V oven (6365 Kit) 1 1 1 6323 230V oven (6361 Kit) 1 1 1 6365-UH Universal holder 4 4 4/pkg 6365-PP Round polishing pad 1 1 1 8365-PP Soft polishing pad 2 1 1 6192-A 2 µm lapping film (pale green) 200 500 500/pkg 661X-1.5S 1.5 µm diamond film (pale grey) 15 15 250/pkg 863X-0.02S Final lapping film (frosted) 50 50 50/pkg 263X 0.05 µm lapping film (pale yellow) 50 50 50/pkg 8892 Po
ページ8に含まれる内容の要旨
i m p o r t a n t important Notice 3M does not accept responsibility or liability, direct or consequential, arising from reliance upon any information provided and the user should determine the suitability of the products for their intended use. Nothing in this statement will be deemed to exclude or restrict 3M’s liability for death or personal injury arising from its negligence. All questions of liability relating to 3M products are governed by the seller’s terms of sale subject where ap
