ページ1に含まれる内容の要旨
3-082-258-11 (1)
USB – PSTN Modem Adaptor
Operating Instructions
Mode d’emploi
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding
this product.
Model No. UNA-PSTN Serial No.
UNA-PSTN
©2003 Sony Corporation
ページ2に含まれる内容の要旨
English Before operating the unit, please read this instructions thoroughly, and retain it for future reference. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Countries and areas This product is intended to be used in the following countries or areas. Australia, Austria, Belgium, Canada, Denmark, Finland, France, Germany, Greece, Hong Kong, Ireland, Japan, Luxembourg, Netherlands, New Zealand, Norway, Portugal, Singapore, Sweden, Switzerland, UK, USA, Italy
ページ3に含まれる内容の要旨
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit d
ページ4に含まれる内容の要旨
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operatio
ページ5に含まれる内容の要旨
For the Customers in CANADA This Class B digital apparatus complies with Canadian ICES-003. INDUSTRY CANADA NOTICE This product meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number (REN) is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five. 5
ページ6に含まれる内容の要旨
For the Customers in Europe Hereby, Sony Corporation, declares that this USB-PSTN modem adaptor is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC. For details, please access the following URL: http://www.compliance.sony.de/ This equipment is in compliance with the requirements of the directive 1999/5/EC (R&TTE), to be connected with all European analogue PSTN. However, due to differences between the individual PSTNs provided in the differen
ページ7に含まれる内容の要旨
Table of contents Precautions on Use ............................................................................................... 8 Precautions on Handling ..................................................................................... 9 Maintenance .......................................................................................................... 9 Parts identification ............................................................................................. 10 Before Use ...
ページ8に含まれる内容の要旨
Precautions on Use Where not to place this device Regardless of whether the USB-PSTN modem adaptor is in use or in storage, do not place it in any of the following locations. Doing so may lead to breakdown. • Locations of extremely high temperature The temperature gets extremely high inside a car with the windows closed in summer or in strong sunshine, and leaving the USB-PSTN modem adaptor inside may cause it to be deformed or break down. • Locations with excessive humidity, dust, soot or steam
ページ9に含まれる内容の要旨
Precautions on Handling • Using the USB-PSTN modem adaptor reduces the amount of time you can use your camcorder, because they share the camcorder’s battery. • When not using the USB-PSTN modem adaptor, disconnect it from your camcorder to prevent your camcorder’s battery from going flat. • Do not lift your camcorder by the USB-PSTN modem adaptor or its cable. • Do not pull out the connector by pulling the cable. • Do not bend or apply excessive force to the cable. Maintenance Wipe the USB-PSTN
ページ10に含まれる内容の要旨
Parts identification When connecting the USB-PSTN modem adaptor, do so correctly by checking the shape of the connectors. 1 POWER lamp (green) 2 ON LINE lamp (orange) 3 DATA lamp (orange) 4 USB connector 5 RJ-11 connector 6 Switch cover 7 AREA CODE switches 8 TONE/P1 (PULSE10)/P2 (PULSE20) selector USB connector : For connection to USB compatible camcorders RJ-11 connector : For connection to a telephone cable Before Use • This USB-PSTN modem adaptor is exclusively for use with a USB network ada
ページ11に含まれる内容の要旨
Setting up the unit You must make certain settings before you can connect the unit to your telephone line. Choose the proper settings for your telephone signaling type. You also have to set the AREA CODE switches according to your area. 2 4 3 (1) Be sure that this unit is not connected to the USB-PSTN modem adaptor compatible camcorders or a RJ-11 cable (telephone cable). (2) Open the switch cover. (3) Select the telephone signaling type with the TONE/P1 (PULSE10)/P2 (PULSE20) selector. TONE: Wh
ページ12に含まれる内容の要旨
Setting up the unit (continued) (5) Close the cover. The setting is completed. Notes • If the TONE/P1 (PULSE10)/P2 (PULSE20) selector is not set to the appropriate position, you cannot communicate with the camcorder. • If you cannot check the dial speed of your pulse dialing phone, set the TONE/P1 (PULSE10)/P2 (PULSE20) selector to P1 (PULSE10). • In some countries and areas, TONE/P1 (PULSE10)/P2 (PULSE20) setting is not required. In such a country or area, the USB-PSTN modem adaptor communicate
ページ13に含まれる内容の要旨
The setup of the AREA CODE switches The default AREA CODE setting is “Japan”. Set the AREA CODE switches to the appropriate positions using a sharp- pointed object following the information given in the table below. You cannot use the unit in areas other than the areas indicated on the table. TONE P1 P2 Notes • “1” for the parameter in the table indicates that setting the switch to the ON side. • The relationship between the 6-digit numbers in the table and the switch positions is as illustrated
ページ14に含まれる内容の要旨
Preparation To connect to the Internet, first you must connect the USB-PSTN modem adaptor to a USB network adaptor-compatible camcorder. Connecting to a telephone line with a PSTN modem adaptor Connect to the Internet via a telephone line using a USB-PSTN modem adaptor. 1 Connect the supplied telephone cable to this unit and the modular jack of the telephone. 14-GB
ページ15に含まれる内容の要旨
2 Attach the USB-PSTN modem adaptor’s USB connector to (USB) jack of your camcorder. Note The position of (USB) jack varies from model to model. For details, refer to your USB network adaptor compatible camcorder’s instruction manual. 3 Set your USB network adaptor compatible camcorder’s power switch to “MEMORY/NETWORK” to display the Network Menu. Your camcorder is now ready for communication. Note Connect the USB-PSTN modem adaptor directly to your USB network adaptor compatible camcorder.
ページ16に含まれる内容の要旨
Disconnecting the USB-PSTN modem adaptor from your camcorder 1 Remove the USB-PSTN modem adaptor’s USB connector from (USB) jack of your camcorder. 2 Remove the telephone cable from the USB-PSTN modem adaptor. 16-GB
ページ17に含まれる内容の要旨
Troubleshooting Before sending the USB-PSTN modem adaptor for repairs, read this manual and the support information on our website http://www.sony.net/. If the USB-PSTN modem adaptor still does not work properly, consult your Sony dealer or local authorized Sony service facility. Symptom Cause/Measures A USB error occurs • Check that the USB-PSTN modem adaptor is correctly connected to the USB terminal of your ex) Connection Error USB network adaptor compatible camcorder. If Connect USB Device i
ページ18に含まれる内容の要旨
Specifications Modem part Applicable line Analog telephone line Interface for the telephone circuit 2 line ceremony interface NCU AA Dial type Pulse dialing (10/20 pps) Tone dialing NCU command AT command Communication format Dual Sending communication rate 300/1200/2400/4800/7200/9600/ 12000/14400/16800/19200/21600/ 24000/26400/28800/31200/33600 bps Receiving communication rate 300/1200/2400/4800/7200/9600/ 12000/14400/16800/19200/21600/ 24000/26400/28800/31200/33600/ 34000/34667/36000/37333/38
ページ19に含まれる内容の要旨
General Outer dimensions approx. 86 × 17.1 × 65 mm (3 1/2 × 11/16 × 2 5/8 in) (width × height × depth) Weight approx. 54 g (1.9 oz) Operating temperature 0°C ~ +40°C Storage temperature –20°C ~ +60°C Accessories Telephone cable (1) Operating Instructions Design and specifications are subject to change without notice. 19-GB
ページ20に含まれる内容の要旨
Français Avant d’utiliser cet appareil, veuillez lire attentivement ces explications, puis conservez-les de manière à pouvoir les consulter. AVERTISSEMENT N’exposez pas cette unité à la pluie ou à l’humidité. Risques d’incendie ou de chocs électriques. Pays et régions Ce produit est destiné à être utilisé dans les régions et pays suivants : Allemagne, Australie, Autriche, Belgique, Canada, Danemark, Etats-Unis, Finlande, France, Grèce, Hong Kong, Irlande, Japon, Luxembourg, Nouvelle-Zélande, Nor
