ページ1に含まれる内容の要旨
User’s Guide
HP 8753E Network Analyzer
HP Rut No. 08753-90367 Supersedes October 1998
Printed iu USA February 1999
ページ2に含まれる内容の要旨
Notice. The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. @ Copyright Hewlett-Packard Company 1998, 1999
ページ3に含まれる内容の要旨
Certification Hewlett-Packard Company certifies that this product met its published specifications at the time of shipment from the factory. Hewlett-Packard further certifies that its calibration measurements are traceable to the United States National Institute of Standards and ‘lbchnology, to the extent allowed by the Institute’s calibration facility, and to the calibration facilities of other International Standards Organization members. Wmanty The actual warranty on your instrument depends o
ページ4に含まれる内容の要旨
Maintenance Clean the cabinet, using a damp cloth only. Assistance are available for Product maintenance agreements and other customer assktmm agremnmts Hewlett-&hrd products Rw an@ assistance, wnmct gour nearest Hewlett-Rzchmd Saks and Service Om Shipment for Service If you are sending the instrument to Hewlett-Packard for service, ship the analyzer to the nearest HP service center for repair, including a description of any failed test and any error message. Ship the analyzer, using the origina
ページ5に含まれる内容の要旨
‘Iktble O-1. Hewlett-Packard Sales and Service OfEces UNITED STATES Instrument Support Center Hewlett-Packard Company (800) 403-0801 EUROPEAN FIELD OPEEA!l’IONS Prame Headquarters G-m=w Hewlett-Packard S.A. Hewlett-Packard France Hewlett-Packard GmbH 1 Avenue Du Canada Hewlett-Packard Strasse 150, Route du Nantd’Avril Zone D’Activite De Courtaboeuf 1217 Meyrin Z/Geneva 61352 Bad Homburg v.d.H &vi&&and F-91947 Les Ulis Cedex Germany (41 22) 780.8111 France (49 6172)16-O (33 1) 69 82 60 60 Gre
ページ6に含まれる内容の要旨
Safety Symbols The following safety symbols are used throughout this manual. Familiarize yourself with each of the symbols and its meaning before operating this instrument. Caution denotes a hazard. It calls attention to a procedure that, if not Caution correctly performed or adhered to, would result in damage to or destruction of the instrument. Do not proceed beyond a caution note until the indicated conditions are fully understood and met. Rkning denotes a hazard. It calls attention to a proc
ページ7に含まれる内容の要旨
General Safety Considerations Note This instrument has been designed and tested in accordance with IEC Publication 1010, Safety Requirements for Electronics Measuring Apparatus, and has been supplied in a safe condition. This instruction documentation contains information and warnings which must be followed by the user to ensure safe operation and to maintain the instrument in a safe condition. This is a safety Class I product (provided with a protective earthing Warning ground incorporated in
ページ8に含まれる内容の要旨
Caution This product is designed for use in Installation Category II and Pollution Degree 2 per IEC 1010 and 664 respectively. Caution VENTILATION REQUIREMENTS: When instaIling the product in a cabinet, the convection into and out of the product must not be restricted. The ambient temperature (outside the cabinet) must be less than the maximum operating temperature of the product by 4O C for every 100 watts dissipated in the cabinet. If the total power dissipated in the cabinet is greater that 8
ページ9に含まれる内容の要旨
User’s Guide Overview n Chapter 1, “HP 8753E Description and Options, n describes features, functions, and available options. n Chapter 2, “Making Measurements,” contains step-by-step procedures for making measurements or using particular functions. n Chapter 3, “Making Mixer Measurements, n contains step-by-step procedures for making calibrated and error-corrected mixer measurements. w Chapter 4, “Printing, Plotting, and Saving Measurement Results,” contains instructions for saving to disk or t
ページ10に含まれる内容の要旨
Network Analyzer Documentation Set The Installation and Quick Start Guide familiarizes you with the network analyzer’s front and rear panels, electrical and environmental operating requirements, as well as procedures for installing, configuring, and verifying the operation of the analyzer. The User’s Guide shows how to make measurements, explains commonly-used features, and tells you how to get the most performance from your analyzer. The Quick Reference Guide provides a summary of selected user
ページ11に含まれる内容の要旨
The HP BASIC Programming Examples Guide provides a tutorial introduction using BASIC programming examples to demonstrate the remote operation of the network analyzer. The System Vertication and ‘lkst Guide provides the system verification and performance tests and the Performance Test Record for your analyzer. xl
ページ12に含まれる内容の要旨
Manufacturer’s Name: Hewlett-Packard Co. Hewlett-Packard Japan, Ltd. Manufacturer’s Address: Microwave Instruments Division 1400 Fountaingrove Parkway Murotani, Nishi-ku, Kobe-shi Santa Rosa, CA Hyogo, 651-22 USA Japan Declares that the product: Product Name: Model Number: Product Options: product Conforms to the following Product specifications: Safety: IEC EMC: 5501 Group Class A IEC 4 CD, 8 IEC 3 V/m, 27-500 MHz :I Supplenientary Information: c &A Jo Kobe, 14
ページ13に含まれる内容の要旨
Contents 1. HP 8753E Description and Options ..................... l-l Where to Look for More Information ............................. l-2 Analyzer Description ............................. l-4 Front Panel Features Analyzer Display .............................. l-7 Rear Panel Features and Connectors ..................... l-11 Analyzer Options Available .......................... 1-13 Option lD5, High Stability Frequency Reference ............... 1-13 ........................ 1-13 Option 002,
ページ14に含まれる内容の要旨
2-13 Characterizing a Duplexer . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14 Required Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14 Procedure for Characterizing a Duplexer . . . . . . . . . . . . . . . . . . 2-17 Using Analyzer Display Markers . . . . . . . . . . . . . . . . . . . . . . . ‘Ib Use Continuous and Discrete Markers . . . . . . . . . . . . . . . . . . 2-17 2-18 lb Activate Display Markers . . . . . . . . . . . . . . . . . . . . . . . . 2-19 lb Move
ページ15に含まれる内容の要旨
2-63 Set Up the Lower Stopband Parameters .................. 2-63 Set Up the Passband Parameters ..................... 2-63 Set Up the Upper Stopband Parameters .................. 2-64 Calibrate and Measure ........................... 2-66 Measurements Using the Tuned Receiver Mode ................ 2-66 Typical test setup ............................. 2-66 Tuned receiver mode in-depth description .................. 2-66 Frequency Range ............................ 2-66 Compatible Sweep Types ...
ページ16に含まれる内容の要旨
3-33 LO to RF Isolation ............................. 3-35 RF Feedthrough .............................. 4. Printing, Plotting, and Saving Measurement Results Where to Look for More Information ..................... 4-2 Printing or Plotting Your Measurement Results................. 4-3 Configuring a Print Function ......................... 4-3 .......................... 4-5 DeIIning a Print Function ...................... 4-6 IfYouAreUsingaColorPrinter .............. 4-6 ‘Ib Reset the Printing P
ページ17に含まれる内容の要旨
..................... What You Can Save to a Computer 4-34 .......................... Saving an Instrument State 4-35 Saving Measurement Results ......................... 4-36 ASCII Data Formats ............................ 4-39 CITIille ................................. 4-39 S2P Data Format. ............................ 4-39 Re-Saving an Instrument State ........................ 4-41 Deleting a File ................................ 4-41 lb Delete an Instrument State File ..................... 4
ページ18に含まれる内容の要旨
5-36 ...................... Deleting Frequency Segments 5-36 ............... Compensating for Directional Coupler Response 5-37 .................. Using Sample-and-Sweep Correction Mode 5-38 ..................... Using Continuous Correction Mode ....... 5-39 lb Calibrate the Analyzer Receiver to Measure Absolute Power 5-40 ..................... Calibrating for Noninsertable Devices 5-41 ............................. Adapter Removal 5-42 ................... Perform the 2-port Error Corrections 5-
ページ19に含まれる内容の要旨
IF Detection ............................... 6-5 6-5 Ratio Calculations ............................ .......................... 6-5 Sampler/IF Correction ........................ 6-5 Sweep-lb-Sweep Averaging 6-6 Pre-Raw Data Arrays .......................... 6-6 Raw Arrays ............................... ............. 6-6 Vector Error-correction (Accuracy Enhancement) 6-6 Trace Math Operation .......................... 6-6 Gating (Option 010 only) ......................... 6-6 The Electrical Del
ページ20に含まれる内容の要旨
............................. 6-23 Segment Menu. ......................... 6-23 Stepped Edit List Menu ...................... 6-24 Stepped Edit Subsweep Menu ...................... 6-25 Swept List Frequency Sweep (Hz) .......................... 6-25 Swept Edit List Menu ....................... 6-25 Swept Edit Subsweep Menu .......................... 6-25 Setting Segment Power ...................... 6-26 Setting Segment IF Bandwidth ............................ 6-27 Power Sweep (dBm) 6-27 .......
