ページ1に含まれる内容の要旨
Contents
What is the Voice Editor?............................ 2
About Studio Manager................................. 3
What is Total Recall .................................... 3
About Open Plug-in Technology.................. 4
Starting the Voice Editor ............................ 6
Menu Bar ..................................................... 7
Library Window ......................................... 10
Edit Window............................................... 20
An Example o
ページ2に含まれる内容の要旨
What is the Voice Editor? With the Voice Editor, you can edit your tone generator’s voices and effects via your computer. Thanks to the easy-to-understand graphical interface, you can edit virtually all of the voice parameters of MOTIF-RACK right from your computer — using the mouse to adjust the virtual knobs, sliders, and buttons and entering values from the computer keyboard. Finally, all the changes you have made to your voices can be saved to your computer. You can use this Voice Editor
ページ3に含まれる内容の要旨
About Studio Manager Studio Manager is a cross-platform application that enables you to start multiple Editors for controlling YAMAHA hardware products remotely, and to save multiple Editor settings. For more information, refer to the separate Installation Guide or the Studio Manager PDF manual. What is Total Recall You can save and recall each Editor’s settings in Studio Manager. This enables you to recall all the settings of multiple devices from Studio Manager and control the entire sy
ページ4に含まれる内容の要旨
About Open Plug-in Technology Open Plug-in Technology (OPT) is a new software format that enables you to control MIDI devices from a music DAW application software. For example, this allows you to start up and operate various parts of your music system, such as plug-in board editors, and mixing control editors - directly from an OPT-compatible sequencer, without having to use each separately. OPT also makes it unnecessary to set MIDI drivers for each application, streamlining you
ページ5に含まれる内容の要旨
About the OPT 2 Overview OPT 2 is a plug-in format that enhances OPT Level 1 (Panels) and adds some convenient functions for use with Total Recall. In addition to doing Total Recall functions using the Studio Manager as a host application, you can use Total Recall in a DAW application (provided it is compatible with Total Recall), via the Studio Manager. Plug-in software compatible with Editor OPT 2 is indirectly connected to OPT2 the DAW application compatible Host Studio Editor with Total
ページ6に含まれる内容の要旨
Starting the Voice Editor After installing the Voice Editor and making the required connection, follow the instructions below to start the Voice Editor. Windows n In order to use the Voice Editor with your tone generator, you’ll need to set the MIDI in/out ports. (page 14) ● Starting Voice Editor from Studio Manager 1. Start Studio Manager as a plug-in within DAW software compatible with Total Recall, or as a stand-alone application. 2. Start Voice Editor from Studio Manager. F
ページ7に含まれる内容の要旨
Menu Bar The Menu Bar contains various editing and setup functions/commands. Click the desired menu name to open the appropriate pull-down menu, and choose the function/command you wish to apply. Those functions/commands which are unavailable are grayed out. n The most commonly-used menus in the Menu Bar are available as buttons in Voice Editor’s toolbar. File New Creates and opens a new Library file. Open Library... This is the same as the “Open” button in the toolbar (page 12).
ページ8に含まれる内容の要旨
Edit Copy Copies the selected voice to the clipboard. If nothing is selected, this item is grayed out. Paste Copies the voice from the clipboard to the Voice Editor. Initialize Resets the selected voice parameters to the default values. If nothing is selected, this item is grayed out. Edit... This is the same as the “Edit Window” button in the toolbar (page 18). Store This is the same as the “Store” button in the toolbar (page 18). Import... This is the same as the “Import” butt
ページ9に含まれる内容の要旨
Setup Setup... This is the same as the “Editor Setup” button in the toolbar (page 14). Transmit Voice Bulk... This is the same as the “Transmit Bulk” button in the toolbar (page 15). Receive Voice Bulk... This is the same as the “Receive Bulk” button in the toolbar (page 16). Monitor This is the same as the “Monitor” button in the toolbar (page 18). Window Close Closes the selected window. Close All Closes all open windows. Library This is the same as the “Library Window
ページ10に含まれる内容の要旨
Library Window When you start Voice Editor, you will first see the Library window, which consists of tabs, each representing a Memory in the tone generation block. Each tab lists all the names, numbers and categories of voices in the selected Memory. Double-clicking on a voice name in the Library window opens the Edit window for a voice, letting you edit the voice. n You can save your settings as a Library file (*.W6E). 1 2 1 Tabs Click any of these to view the voice list for the cor
ページ11に含まれる内容の要旨
Split Bar If you place the mouse pointer over the line (Split Bar) that divides the Track Parameter Section from the Block Section, the pointer will change shape into the split tool. With this tool, you can drag the Split Bar back and forth and change the widths of the two sections. n You can change the size of any of the windows by placing the mouse pointer on the top, bottom, left, or right border lines of the window, then dragging the line until the window is as big or small as you l
ページ12に含まれる内容の要旨
Library Window Toolbar 12 3 4 5 6 7 8 9 0 A 1 “Open” button Click this to open the “Open” dialog and select a Library file to open. “Open” Dialog Select the desired Library file (extension: .W6E) and click [Open]. The contents of the selected file is indicated on the Library Window. 1 2 3 5 6 4 n If you are using a Macintosh, the typical Macintosh “Open” dialog will appear. 1 Look in ............................Click this and choose the folder containing the Voice Editor files. 2 List box.........
ページ13に含まれる内容の要旨
2 “Save” button Click this to save the existing Library file with your new settings. If you are working on a new file, this button will open the “Save As” dialog, where you can name and save your settings as a new Library file (*.W6E). “Save As” Dialog 1 2 3 5 4 6 n If you are using a Macintosh, the typical Macintosh “Save As” dialog will appear. 1 Save in ............................Click this and choose the folder in which to save the Library file. 2 List box............................Shows the c
ページ14に含まれる内容の要旨
3 “Editor Setup” button Click this to open the “Setup” dialog and specify the MIDI Out port settings. “Setup” Dialog This is where you set up the Voice Editor to allow the transmission/reception of voice data to/from your tone generator. Click the [OK] button to apply the settings and quit the dialog. Click the [Can- cel] button to quit without applying the settings. 1 2 3 4 5 6 1 MIDI In Port.....................Click this and choose the MIDI In port. You can use the Voice Editor to receive dat
ページ15に含まれる内容の要旨
4 “Transmit” button Click this to open the “Transmit” dialog to transmit all settings to your tone generator. “Transmit” Dialog Voice data can be transmitted in bulk to your tone generator. Click the [Start] button to begin trans- mitting the data. The progress bar shows how much of the data has been transmitted. Finally, click the [Close] button to quit the dialog. 1 2 3 4 1 Transmit Type..................Indicates the voice data to be transmitted. Normal User 1 ........................ All No
ページ16に含まれる内容の要旨
5 “Receive” button Click this to open the “Receive” dialog to receive all settings from your tone generator. “Receive” Dialog Voice data can be received in bulk from your tone generator. Select the bulk voice data you wish to receive, then click the [Start] button. The progress bar shows how much of the data has been received. Finally, click the [Close] button to quit the dialog. 1 2 3 4 1 Receive Type...................Click this and choose the Voice data (internal/external/all) to receive. Nor
ページ17に含まれる内容の要旨
7 “Import” button Click this to open the “Import” dialog and import voices from an existing Library file. You can drag-and-drop voices to the Library Window. “Import” Dialog n More than one of these dialogs can be opened simultaneously. 1 2 3 4 5 6 1 File Name .......................Indicates the name of the Library file from which you will import voice data. 2 [Open File] button ...........Click this to open the “Open File” dialog and select a Library file to open (page 12). 3 Memory..............
ページ18に含まれる内容の要旨
5 Monitor............................If you check this box, the bulk data for each voice you select from the list will be transferred to your tone generator for monitoring. To monitor the voice, use the keyboard connected to your tone generator. n Monitoring will not be possible if the MIDI Out port and other parameters in the Editor Setup are not set correctly. For further details, see page 14. 6 [Close] button..................Click this to close the Import dialog. 8 “Monitor” button If you cl
ページ19に含まれる内容の要旨
4 In the Voice Name list, click the voice in which your edited voice will be stored. After storing to a Library file, the data for the original voice will be overwritten when you save the Library file. It is recommended that you back up important data. 5 Click the [Store] button to store your edited voice in the location specified in step #4. The “Store” dialog is used to temporarily store your Library file. After storing, save your Library file. If you do not save your Library file after storing,
ページ20に含まれる内容の要旨
Edit Window There are three types of voices you can edit using Voice Editor: Normal voices, Drum voices, and Plug-in voices. In the Library window, click the tab containing the Normal voice/Drum voice/Plug-in voice that you wish to edit. Then double-click the voice (or select it and click the “Edit Window” button) to open the Edit window. • Settings in the Edit window are transmitted via MIDI from your computer to your tone generator in realtime. • Settings in the Edit window can be stored to
