ページ1に含まれる内容の要旨
BD-H5900
™
Blu-ray Disc Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
ENGLISH
ページ2に含まれる内容の要旨
CLASS 1 LASER pROdUCT Precautions Safety Information This Compact Disc player is classified as a Important Safety Instructions CLASS 1 LASER product. Use of controls, Warning adjustments or performance of procedures Read these operating instructions carefully other than those specified herein may before using the unit. Follow all the safety TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). result in hazardous radiation exposure. instructions listed below. NO USER-SE
ページ3に含まれる内容の要旨
● 12. Use only with the cart, When cleaning, wipe gently from the As the video resolution in 3D play mode - Using the 3D function stand, tripod, bracket, inside to the outside of the disc. is fixed according to the resolution or table specified by ● of the original 3D video, you can Disc Storage IMPORTANT HEALTH AND SAFETY the manufacturer, not change the resolution to your INFORMATION FOR 3D PICTURES. Read ` Do not keep in direct sunlight. or sold with the preference. and understand th
ページ4に含まれる内容の要旨
Contents Getting Started SAFETy INFORMATION Display Settings .................................... 11 Before using the User Manual Audio Settings ..................................... 12 Warning ................................................. 2 disc Types and Contents your player can play Network Settings ................................. 13 Precautions ............................................ 2 System Settings .................................... 16 Disc Storage & Management ..............
ページ5に含まれる内容の要旨
● Your player only supports video with a frame rate under 30fps (frames per second). Logos of Discs the player can play Region Code ● Your player only supports USB Mass Storage Class (MSC) devices such as thumb drives Both players and discs are coded by region. and USB HDD. (HUB is not supported.) These regional codes must match for a ● Certain USB HDD Devices, multi-card readers and thumb drives may not be disc to play. If the codes do not match, the compatible with this player. disc will
ページ6に含まれる内容の要旨
Limitations • AVCHd (Advanced Video Codec High definition) Even when a file is encoded by a supported codec listed above, the file might not be - ● This player can play back AVCHD format discs. These discs are normally recorded and played if its content has a problem. used in camcorders. Normal playback is not guaranteed if the file’s container information is wrong or the - ● The AVCHD format is a high definition digital video camera format. file itself is corrupted. ● The MPEG-4 AVC/H.
ページ7に含まれる内容の要旨
Front Panel Remote Control pLAy/pAUSE BUTTON Tour of the Remote Control STOp BUTTON Turn the player on and off. Turn the TV on and off. OpEN/CLOSE BUTTON After setup, allows you to set the input source on your TV. Press to open and close the disc tray. TV volume adjustment. pOWER BUTTON Press the number buttons to operate options. Use to enter the disc menu. Use to enter the popup menu/title menu. Press to skip backwards or forwards. Press to search a disc backwards or forwards. Press to stop
ページ8に含まれる内容の要旨
Connecting to an Audio System Connections You can connect the Blu-ray player to an audio system using one of the methods illustrated below. Connecting to a TV Do not connect the power cord to the wall outlet until you have made all the other - connections. Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV. When you change the connections, turn off all devices before you start. - - Do not connect the power cord to the wall o
ページ9に含まれる内容の要旨
Connecting to a Network Router Wireless Network You can connect your player to your network router using one of the methods illustrated below. To use the AllShare network functionality, you must connect your PC to your network as shown in the illustrations. The connection can be wired or wireless. Wired Network Wireless Router Broadband modem Broadband (with integrated router) service Broadband service Or NOTES ✎ ■ If your wireless router supports DHCP, this player can use a DHCP or stat
ページ10に含まれる内容の要旨
Wired Network Initial Settings I Network Security Key Settings Enter security key. 0 / 64 linksys3 solugen_edu#2 1. The Blu-ray player automatically verifies iptime23 solugen_edu#1 your wired network. The Initial Settings Procedure Caps 1 2 3 4 5 6 7 8 9 0 Clear Initial Settings q w e r t y u i o p ^ * 123#& a s d f g h j k l ~ @ ! done z TV Aspect and Network will be set. x c v b n m , . ? - ▲ Cancel Initial Settings I Network Each setting may be changed later under "Setting
ページ11に含まれる内容の要旨
■ ● ■ If you want to use the Home Menu Depending on the content and the Accessing the Settings Menu Anynet+(HDMI-CEC) function to aid position of the picture on your TV in the initial set up process, please screen, you may see vertical black bars 6 1 To access the Settings menu and sub- follow the instructions below. on the left side, right side, or both sides. menus, follow these steps: play disc photos Videos Music 1) Connect the player to an 1. Press the pOWER button. Anynet+(HDMI-CEC)
ページ12に含まれる内容の要旨
Resolution according to the output NOTES Audio Settings ✎ ■ If the TV you connected to the player does not mode support Movie Frame or the resolution you selected, the message "If no pictures are shown digital Output ● Blu-ray disc/E-contents/digital Contents after selecting ‘Yes’, please wait for 15 seconds playback to return to the previous resolution. Do you Lets you select the digital audio output format that is suitable for your TV or AV Receiver. want to change the resolution?" ap
ページ13に含まれる内容の要旨
Blu-ray Discs may include three audio streams : If you are connecting to a wired network, 3. Select the IP Setting field, and then dynamic Range Control press the button. connect the player to your router v - Main Feature Audio : The audio Lets you apply dynamic range control to using a LAN cable before you start the soundtrack of the main feature. 4. Select Enter manually in the IP Setting Dolby Digital, Dolby Digital Plus, and Dolby configuration procedure. field, and then press the but
ページ14に含まれる内容の要旨
10. On the Security screen, enter your Ğ Wireless - Automatic Ğ Wireless - Manual Ğ WpS(pIN) network's Security Code or Pass If you have a static IP address or the Before you begin, open the router's setup 1. In the Home screen, select Settings, Phrase. Enter numbers directly using Automatic procedure does not work, you'll menu on your PC and access the screen and then press the button. v the number buttons on your remote need to set the Network Settings values with the WPS PIN entry fie
ページ15に含まれる内容の要旨
■ 2. When you have completed the When you are using the Screen NOTES Wi-Fi direct ✎ procedure, you should see a pop-up on ■ Mirroring function, video stuttering The current wired or wireless network The Wi-Fi Direct function allows you to your TV screen saying that a device that or audio dropouts may occur, connection will be disconnected when connect Wi-Fi Direct devices to the player supports Wi-Fi Direct has requested to depending on your environment. you use the Wi-Fi Direct function.
ページ16に含まれる内容の要旨
■ 3. On the next screen, click See All The total memory available to BD Using Bd-LIVE™ NOTES ✎ Data Management may differ, Downloads under Downloads. ■ This function is not available if the HDMI depending on the conditions. Once the player is connected to the network, cable does not support CEC. 4. Click Software on the next page. you can enjoy various movie-related service ■ If your Samsung TV has an Anynet+ logo, 5. Click the icon in the DLNA S/W line under contents using a BD-LIVE co
ページ17に含まれる内容の要旨
2. Use the ▲▼ buttons to select On, and Support Settings By USB Change pIN then press the v button. To upgrade by USB, follow these steps: Change the 4-digit password used to If there is a new software version available, Software Upgrade access security functions. 1. Visit www.samsung.com/bluraysupport. the player notifies you with a popup message. 2. Download the latest USB software To change the PIN, follow these steps: The Software Upgrade menu allows you to 1. To upgrade the firmware, re
ページ18に含まれる内容の要旨
Playing a Disc with User Recorded play disc photos Videos Music Change device Media Play Content No disc 123 a You can play multimedia files you have Playing a Commercially Recorded 3. Use the ▲▼ buttons to select photos, Empty disc tray recorded on Blu-ray, DVD, or CD discs. Videos, or Music, and then press the Disc button. The Photos, Videos & Music v 1. Place a user recorded disc into the disc Close screen appears listing the content of App 1 App 2 App 3 App 4 App 5
ページ19に含まれる内容の要旨
5. A screen appears listing the contents Playing Content Located on Your playback related buttons Controlling Music Playback of the disc. Depending on how the PC or AllShare Device through the The player does not play sound in Search, contents are arranged, you will see You can control the playback of music Blu-ray Disc Player Slow, or Step mode. either folders, individual files, or both. located on a Blu-ray disc, DVD, CD, USB ● To return to normal speed playback, 6. If necessary, us
ページ20に含まれる内容の要旨
NOTES Repeat an Audio Cd (Cd-d A)/ playlist Ripping ✎ ■ This function may not be supported Mp3 by some discs. 1. To move to the Music List, press the 5 Lets you copy audio files from a data disc ■ On the Ripping screen, you can also or RETURN button. to a USB/HDD device. 1. During Playlist playback, press the choose Select All and deselect All. The Music List screen appears. TOOLS button. 1. Open the disc tray. Place the audio Use Select All to select all tracks. - 1/2 page (CDDA) dis
