ページ1に含まれる内容の要旨
RM-50 Professional DJ mixer
OWNER’S M A N U A L
STANTON MAGNETICS, LLC
© 2001, Stanton Magnetics, LLC
info@stantonmagnetics.com
ページ2に含まれる内容の要旨
T RO U B LE S H O OT I N G Thank you for making Stanton your first choice in professional DJ mixers. Problem Cause Solution This new, innovative family of mixers has been developed with input from the profes- Excessive hum when using Poor ground connection. Properly connect turntable sional DJ community, bringing to the marketplace a previously unavailable, afford- phono source. ground wire to mixer ground able combination of user-friendly, functional design, rugged construction, and pro- termin
ページ3に含まれる内容の要旨
D E S C R I P TI ON O F F U N C TI O N S players (such as StantonÕs S-Series) to start the audio from the CD playerÕs cue point. 15. Channel fader: Controls the input channel level. 16. Microphone volume: Controls the output levels of mics 1, 2, and 3. 17. Mic selector: Turns the mic on or off and activates the automatic talkover circuit. When activated, the automatic talkover circuit reduces the music output based on the setting of the talkover attenuation control (19). 18. Mic EQ: Individual
ページ4に含まれる内容の要旨
FA DER CLE A N I N G T E C H N I C A L S P E C I FI C AT I O N S The RM-50 faders may need lubrication from time to time. This will extend the Line inputs: 8 (RCA), 150 mV / 27K ohm fader life and eliminate any potential damage due to extended heavy usage. Phono inputs: 4 (RCA), 3 mV / 47K ohm DJ mic input: 3 (XLR, 1/4Ò), 2.45 mV / 3K ohm Cleaning Instructions Master output: 1 (RCA), 1.2 V / 1K ohm Booth output: 1 (RCA), 1.2 V / 1K ohm 1. Remove the fader and disconnect the cable coming from the
