ページ1に含まれる内容の要旨
Digital Piano
CP67
Owner’s Manual
ページ2に含まれる内容の要旨
Thank you for choosing this Kawai CP67 Digital Piano. Your new CP67 is a high-quality instrument offering the very latest in leading-edge music technology. This manual contains valuable information that will help you make full use of your CP piano’s many capabilities. Please read it carefully and keep it handy for further reference. TABLE OF CONTENTS Page Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Assembling The Stand . . . . . . . . . .
ページ3に含まれる内容の要旨
Important Safety Instructions SAVE THESE INSTRUCTIONS INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS WARNING TO REDUCE THE RISK OF CAUTION FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE RISK OF ELECTRIC SHOCK THIS PRODUCT TO RAIN DO NOT OPEN OR MOISTURE. AVIS : RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lighting f
ページ4に含まれる内容の要旨
Do not lean against the keyboard. Doing so may cause the product to fall over, resulting in injury. Do not disassemble, repair or modify Doing so may result in product breakdown, electric the product. shock or short-circuit. Pulling the AC power cord itself may damage When disconnecting the AC power cord' s the cord, causing a fire, electric shock or plug, always hold the plug short-circuit. and pull it to remove it. The product is not completely disconnected from the Failure to do so
ページ5に含まれる内容の要旨
Doing so may result in discoloration or deformation Do not wipe the product with benzene of the product. or thinner. When cleaning the product, put a soft cloth in lukewarm water, squeeze it well, then wipe the product. Doing so may cause the product to become Do not stand on the product or exert deformed or fall over, resulting in breakdown excessive force. or injury. The product should be located so that its location or position does not interfere with its proper ventilation. This
ページ6に含まれる内容の要旨
ASSEMBLING THE STAND Be sure that all parts are included before starting to assemble your unit. PARTS PROVIDED Side Panel (A) 2 pcs. M6 x 25 ø4 x 16 ø4 x 25 Adjuster Cord Clamp Back Board (B) 1 pc. Pedal Board (C) 1 pc. Screw (D) (M6 x 25) 4 pcs. Screw (E) (ø4 x 16) 6 pcs. Screw (F) (ø4 x 25) 2 pcs. Adjuster (G) 1 pc. (D) (E) (F) (G) (H) Cord Clamp (H) 1 pc. Headphone Hook Set 1 set. 1. Insert the Adjuster (G) on the Pedal Unit. (A) 2. Untie the pedal cable on the bottom of the (a) Pedal Board (
ページ7に含まれる内容の要旨
6. Maintaining a firm grasp under the front of the main, unit slide it toward the rear of the stand until the hook brackets engage the brackets at the rear top of the side panels (A). This hook arrangement is design to prevent the main unit from tilting forward while the screws are installed. Keep one hand under the front of the main unit, push down on the front to be certain that hooks are properly engaged. 7. Fasten the main unit and the stand with four screws (D). CAUTION: Be sure to secure
ページ8に含まれる内容の要旨
PART NAMES MASTER VOLUME SLIDER (A) Move the volume slider to the right to increase the instrument’s volume. Move the slider to the left to decrease the volume. CONCERT MAGIC BUTTON (B) This button is used to listen to a Concert Magic song. DEMO BUTTON (C) To listen to the demos, simply press this button and the demos will start. STYLE BUTTONS (D) These buttons are used to select different styles to accompany your playing. 1-2 PLAY BUTTON (E) This button is used to automatically choose an appro
ページ9に含まれる内容の要旨
VALUE BUTTONS (L) This buttons are used to adjust tempo, scroll through different selections, and adjust data values on the LED display. EFFECTS BUTTON (M) This button turns the Effect on/off. REVERB BUTTON (N) This button turns the Reverb on/off. BALANCE SLIDER (O) This slider adjusts the volume balance of the two sounds used in Dual mode. Also adjusts the volume of the accompaniment style. SOUND BUTTONS (P) These buttons are used to select the desired sound. RECORDER BUTTONS (Q) The PLAY/STOP
ページ10に含まれる内容の要旨
POWER BUTTON (a) This button turns the instrument on and off. Be sure to turn off the instrument when you are finished playing. a SOFT PEDAL (b) Depressing this pedal softens the sound and also reduces its volume. SOSTENUTO PEDAL (c) Depressing this pedal after playing the keyboard and before releasing the keys sustains the sound of only the keys just played. SUSTAIN PEDAL (d) Depressing this pedal sustains the sound even after you remove your hands from the keyboard. b c d – 10 –
ページ11に含まれる内容の要旨
LINE OUT JACKS (e) These jacks are used to connect an external amplifier and speakers, or a cassette recorder to the CP piano. LINE IN JACKS (f) These jacks are used to connect stereo outputs from other audio equipment or electronic instruments to the CP piano’s speakers. MIDI JACKS (g) These jacks are used to connect the CP piano with external MIDI devices. PEDAL JACK (h) Connect the pedal cord from the pedal board to this jack. HEADPHONES JACKS (i) These jacks are used to connect up to two hea
ページ12に含まれる内容の要旨
GETTING STARTED 1. BASIC OPERATIONS (1) Turn on the power. You will find the POWER SWITCH at the right end of the front panel. Press this button to turn on the power. Pressing it again will turn off the power. (2) Adjust the volume. Play a note on the keyboard and adjust the volume (Moving the slider to the right raises the volume while moving to the left lowers it.) (3) Select a sound. Press the SOUND SELECT button under the name of the instrument you would like to listen to. When the button
ページ13に含まれる内容の要旨
ABOUT POLYPHONY The CP piano is capable of playing up to 96 notes simultaneously (96-note polyphony). When playing in dual mode or when playing the stereo piano sound, the polyphony will be reduced by half since the piano has to produce two sounds for each note. (6) Reverb -REVERB adds reverberation to the sound simulating the acoustic environment of a recital room or concert hall. There are six types of reverb in the CP67. They are Small Room, Medium Room, Large Room, Medium Hall, Large Hall
ページ14に含まれる内容の要旨
2. STYLE (1) Select a style. Press one of the STYLE buttons. The LED of the selected STYLE button will light to indicate which style is currently in being used. Pressing the active STYLE button again will switch to the alternative style of the STYLE button. (2) Start the style. Pressing the START/STOP button will start the style. Pressing it again will stop the style. Pressing the INTRO/ENDING button will start the style with an intro section. Pressing it again will stop the style with an en
ページ15に含まれる内容の要旨
(5) 1-2 Play mode When the 1-2 PLAY button is activated, the CP piano will automatically choose an appropriate sound setup and tempo for the selected style. You can adjust the volume of the accompaniment style by using Balance slider. 3. TRANSPOSE The transpose function lets you raise or lower the piano’s key in half steps. This is especially useful when you have learned a song in one key and have to play it in another key. The transpose feature allows you to play the song in the original key,
ページ16に含まれる内容の要旨
Heavy 1 / 2 (HE): Perfect for those with strong fingers or for practicing with a hard touch. Heavy 2 is heavier than Heavy 1. HEAVY 2 Off (OFF): For tone colors like organ or harpsichord, and for playing some contemporary music with the piano sound, a constant loud sound is produced regardless of your force on the keys. OFF To change the touch type, press and hold the TOUCH button. The LED display shows you the current touch type. While holding the TOUCH button, use the VALUE buttons to chang
ページ17に含まれる内容の要旨
Changing the time signature You probably noticed that there are two types of clicks and the louder one comes every fourth beat. The metronome is capable of giving you a down beat to indicate the beginning of the measure. You are now hearing a 4- beat or 4/4 time signature. You can select different a time signature if you want to out of the seven available with the CP piano—1/4, 2/4, 3/4, 4/4, 5/4, and 6/8. To change the time signature, use the BEAT button. Press the BEAT button. You will see
ページ18に含まれる内容の要旨
DIGITAL RECORDING FUNCTIONS 1. EASY RECORDING Press the REC button. The CP piano is now ready to record. To cancel the recording, press the REC button again. Begin playing some music on the piano. The CP piano will automatically start recording with the first note you play. You can also start recording by pressing the PLAY/STOP button. Press the PLAY/STOP button when you have finished recording. NOTE: Starting another recording will delete the song you previously recorded. 2. PLAYING BACK A
ページ19に含まれる内容の要旨
Press the PLAY/STOP button after you have finished recording. Holding down the PLAY/STOP button, press the SONG 2 button. Releasing both buttons will play Song No.2. Playback will automatically stop when the song is finished. You can adjust the tempo of playback by using the VALUE buttons. RECORDING/PLAYING BACK THE LEFT AND RIGHT HAND PARTS SEPARATELY The CP piano can record the parts played by the left or right hand and play back these parts separately or simultaneously. This function can b
ページ20に含まれる内容の要旨
NOTE: If you play with the style (rhythm and accompaniment), it is also recorded but only on track 1. PLAYING BACK THE LEFT- AND RIGHT-HAND PARTS SEPARATELY After you have recorded the left- and right-hand parts (Track 1 and Track 2) separately, it is possible to play back the two parts by themselves or together. The following example shows how to play back only Track 2. Select and press one of the SONG buttons (Song 1, Song 2 or Song 3) while pressing the PLAY/STOP button. While holding down t
