ページ1に含まれる内容の要旨
Plena Mixer Amplifier
Installation and User Instructions
en PLE-1MA030-US
PLE-1MA060-US
PLE-1MA120-US
ページ2に含まれる内容の要旨
Plena Mixer Amplifier | Installation and User Instructions | Important safeguards en | 2 Important safeguards 8 Accessories - Do not place this unit on an unstable stand, tripod, bracket or mount. This unit may fall, causing serious injury to a person and serious Alerts on the apparatus damage to the unit. Use only a stand, tripod, bracket This symbol found on the apparatus indicates or mount recommended by the manufacturer, or hazards arising from dangerous voltages. sold with the product
ページ3に含まれる内容の要旨
Plena Mixer Amplifier | Installation and User Instructions | Important safeguards en | 3 outlet, contact your electrician to replace your perform safety checks to determine that the unit is in obsolete outlet. Do not defeat the safety purpose of proper operating condition. the grounding-type lug. 21 Lightning - For added protection of the units during 14 Power-Cord Protection - Power supply cords should a lightning storm, or when it is left unattended and be routed so that they are not likely
ページ4に含まれる内容の要旨
Plena Mixer Amplifier | Installation and User Instructions | Important safeguards en | 4 American Users Canadian Users Note Note This equipment has been tested and found to This Class B digital device complies with comply with the limits for a Class B digital Canadian ICES-003. device, pursuant to part 15 of the FCC rules. Cet appareil numérique de classe B est These limits are designed to provide reasonable conforme à la norme NMB-003 du Canada. protection against harmful interference in a
ページ5に含まれる内容の要旨
Plena Mixer Amplifier | Installation and User Instructions | Table of contents en | 5 Table of contents Important safeguards ...................................................................................................................................................2 Table of contents ...........................................................................................................................................................5 1. Introduction ...................................
ページ6に含まれる内容の要旨
Plena Mixer Amplifier | Installation and User Instructions | Table of contents en | 6 5. Operation ..................................................................................................................................................................... 27 5.1 Switch on and off ................................................................................................................................................................. 27 5.1.1 Switch on .............................
ページ7に含まれる内容の要旨
Plena Mixer Amplifier | Installation and User Instructions | Introduction en | 7 1 Introduction 1.6 Icons 1.6.1 Note icons 1.1 Purpose The icons used in combination with Notes provide extra The purpose of these Installation and User Instructions information about the Note. See the following is to provide information required for installing, examples: configuring and operating a Plena Mixer Amplifier. 1.2 Digital document Note General icon for notes. These Installation and User Instructions ar
ページ8に含まれる内容の要旨
Plena Mixer Amplifier | Installation and User Instructions | Introduction en | 8 1.7 Conversion tables In this manual, SI units are used to express lengths, masses, temperatures etc. These can be converted to non-metric units using the following information. table 1.1: Conversion of units of length 1 in = 25.4 mm 1 mm = 0.03937 in 1 in = 2.54 cm 1 cm = 0.3937 in 1 ft = 0.3048 m 1 m = 3.281 ft 1 mi = 1.609 km 1 km = 0.622 mi table 1.2: Conversion of units of mass 1 lb = 0.4536 kg 1 kg = 2,2046
ページ9に含まれる内容の要旨
Plena Mixer Amplifier | Installation and User Instructions | Description en | 9 2 Description The volume of each microphone/line signal can be individually adjusted to obtain the required mix; the mixed output is controlled via the master volume 2.1 The Plena product range control and separate high/low tone controls. The Plena Mixer Amplifier is part of the Plena product The unit is easy to use, and provides a crisp call or clear range. Plena provides public address solutions for places musi
ページ10に含まれる内容の要旨
Plena Mixer Amplifier | Installation and User Instructions | Description en | 10 An LED meter monitors the master output before the zone selection. This signal is also present on the headphone connector below the output meter. For total reliability and ease of use, a limiter is integrated into the output stage to restrict output if the user applies too much signal. 70V 0 ducking DIP dri ve DIP PTT 0 Call only 70V LINE/MIC 70V Amplifier 70V Pha ntom Power 0 0 8Ohm Click 0 8Ohm suppressi on LIN
ページ11に含まれる内容の要旨
Plena Mixer Amplifier | Installation and User Instructions | Description en | 11 2.4 Controls, connectors and indicators Note Users can create custom labels for the 2.4.1 Front panel microphone/line inputs and description of the See figure 2.2 for an overview of the controls and music sources. These labels can be attached to indicators. the mixer amplifier at position numbers 2 and 3 1 Power button. (see figure 2.2). Colored pins can also be 2 Label holder for user-defined description of
ページ12に含まれる内容の要旨
Plena Mixer Amplifier | Installation and User Instructions | Description en | 12 2.4.3 Rear panel 15 Microphone/line 4 input, Euro style pluggable screw See figure 2.3 for an overview of the connectors and terminal connector - DIP switch settings for mic/line, switches: and phantom power (see number 14). 1 Tel. emergency/70V input, Euro style pluggable 16 Outputs: screw terminal connector - VOX function. This input • Call only, screw terminal connector 70 V. has highest priority. • Screw term
ページ13に含まれる内容の要旨
Plena Mixer Amplifier | Installation and User Instructions | Description en | 13 1 2 3 4 5 6 7 8 9 F01U.066.938 Rated input PLE-10M2-EU 8900 192 21001 power: 40VA 2 Channel Mixer Apparatus delivered 115/230V~, 50/60Hz Call connected for 230V~ S/N Trigger Line fuse Gnd T1L250V for 230V Design & Quality The Netherlands T1.6L250V for 115V PLE-2CS In Telephone/Emergency Input Chime Ducking 100V 0 Gnd Line Music Out Only Mix Mute Out Wall Panel Output Zone 1 Out Zone 2 Out 1(disc) 2(radio) 3(aux) Ins
ページ14に含まれる内容の要旨
Plena Mixer Amplifier | Installation and User Instructions | Description en | 14 Intentionally left blank Bosch Security Systems | 2007-12 | PLE-1MA030-US, PLE-1MA060-US, PLE-1MA120-US en
ページ15に含まれる内容の要旨
B Plena Mixer Amplifier | Installation and User Instructions | Installation en | 15 3 Installation 3.3 Check settings/connections 1 Connect any additional equipment (see section 4.1 and 4.2). 3.1 Unpack unit 2 Check the settings (see section 4.3). 1 Remove the unit from the box, and discard the packaging material according to local regulations. 3.4 Connect unit to mains 2 Use your fingernails to carefully peel off the protective plastic film from the label holders. Do not use sharp or pointe
ページ16に含まれる内容の要旨
Plena Mixer Amplifier | Installation and User Instructions | Installation en | 16 Intentionally left blank Bosch Security Systems | 2007-12 | PLE-1MA030-US, PLE-1MA060-US, PLE-1MA120-US en
ページ17に含まれる内容の要旨
Plena Mixer Amplifier | Installation and User Instructions | Connections and settings en | 17 4 Connections and settings 4.1 Connecting inputs 4.1.1 Priority microphone (input 1) The priority microphone (or a generic call station) that can be used with push to talk (PTT) should be connected to “microphone/line 1 input”. The PTT mode can be activated by setting the DIP switch (11) at the rear of the unit. Microphone/line 1 input has priority over all other microphone/line inputs. If, however
ページ18に含まれる内容の要旨
Plena Mixer Amplifier | Installation and User Instructions | Connections and settings en | 18 4.1.2 Secondary microphone (input 2) 4.1.3 Additional microphones Connect a secondary microphone to “microphone/line (inputs 3 and 4) input 2”. See figure 4.2. Connect additional microphones to microphone/line inputs 3 and 4 as required. See figure 4.2. These Microphone/line input 2 has a DIP switch (11) at the microphones will mix with the background music. rear of the unit for setting the VOX mode.
ページ19に含まれる内容の要旨
Plena Mixer Amplifier | Installation and User Instructions | Connections and settings en | 19 4.1.4 Emergency inputs The Tel. emergency/70V input, with VOX functionality, is used for receiving emergency announcements or Note signals (such as a fire alarm). This input has absolute Tel. emergency input does not mute the priority, and will overrule all inputs when an emergency incoming signal so that an incoming pilot tone announcement or signal is received. will be fed to the zone outputs. Wit
ページ20に含まれる内容の要旨
Plena Mixer Amplifier | Installation and User Instructions | Connections and settings en | 20 4.1.4.2 Connecting telephone lines Connect the telephone lines as shown in figure 4.4. Caution A connection to a telephone network must always be made via a telephone coupler that provides adequate isolation between the telephone network (PBX) and the Plena system. The telephone coupler must also meet all relevant requirements for this type of communication equipment as imposed by law and/or resp
