ページ1に含まれる内容の要旨
D01044520A
2488neo
OWNER'S MANUAL
ページ2に含まれる内容の要旨
IMPORTANT SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an eq
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Do not expose this apparatus to drips or splashes. 1 Read these instructions. • Do not place any objects filled with liquids, such as • 2 Keep these instructions. vases, on the apparatus. 3 Heed all warnings. Do not install this apparatus in a confined space such • as a book case or similar unit. 4 Follow all instructions. The apparatus draws nominal non-operating power from • 5 Do not use this apparatus near water. the AC outlet with its POWER switch in
ページ4に含まれる内容の要旨
Safety Information This product has been designed and manufactured CAUTION according to FDA regulations “title 21, CFR, chapter • DO NOT REMOVE THE PROTECTIVE HOUSING 1, subchapter J, based on the Radiation Control for USING A SCREWDRIVER. Health and Safety Act of 1968, ” and is classified as • USE OF CONTROLS OR ADJUSTMENTS OR a class 1 laser product. There is no hazardous invis- PERFORMANCE OF PROCEDURES OTHER THAN ible laser radiation during operation because invisible THOSE SPECIFIED
ページ5に含まれる内容の要旨
Contents Rear panel ..............................................23 1 − Introductions ............................... 8 Supplied accessories ................................8 4 − Recording ................................... 24 Use with a personal computer ................8 Setting up your first song .....................24 About this Owner's Manual ....................9 New song ........................................................24 Manual conventions .................................9 Se
ページ6に含まれる内容の要旨
Contents Editing mic effects ..........................................40 Auto punch operations ..........................55 Multi-effect .............................................41 Setting the punch points ...............................56 Assigning the multi-effect .............................41 Checking the punch points ............................56 Editing the multi-effect .................................41 Rehearsing the punch ....................................56 Using the multi-ef
ページ7に含まれる内容の要旨
Contents CD-RW erase ...........................................78 14 − Specifications, etc. .................. 99 CD EJECT ..................................................78 Block diagram .........................................99 Level diagram .......................................100 9 − Reformatting ............................. 79 Specifications .......................................101 Reformatting the entire hard disk .......79 Audio connections ......................................
ページ8に含まれる内容の要旨
1 − Introductions Thank you for purchasing the 24-track TASCAM 2488neo About Copyright, Trademark and Liability Digital Portastudio. With this all-in-one digital multitrack This product is designed to help you record and reproduce recorder, you can record, mix and master audio on an sound works to which you own the copyright, or where you 80GB hard disk and make audio and backup CDs with the have obtained permission from the copyright holder or the internal CD-RW drive. rightful licensor.
ページ9に含まれる内容の要旨
1 − Introductions About this Owner's Manual This Owner's Manual is comprised of the following chap- 8 – Mastering and CD recorder (page 69) ters. This chapter explains the procedures for creating a stereo master track after recording and the procedures for making 1 – Introductions (page 8) audio CDs using the internal CD recorder. It also covers In addition to an overview of the unit and information other CD recorder functions. about CD-R/CD-RW discs and other features, this chapter explain
ページ10に含まれる内容の要旨
1 − Introductions Precautions and notes for placement and use The 2488neo may be used in most areas, but to maintain Relative humidity should be 30 to 80 percent. • top performance, and prolong operating life, observe the As the unit may become hot during operation, always • following notes, precautions and environmental conditions: leave sufficient space above the unit for ventilation. Do not install this unit in a confined space such as a book- Avoid exposing it to extremes of temperature
ページ11に含まれる内容の要旨
1 − Introductions About CD-R and CD-RW discs CD-R discs can be recorded once only. Once they have Always store CD-R and CD-RW discs in their cases to • been used for recording, they cannot be erased or re- avoid dirt and dust accumulating on their surfaces. recorded. However, if space is available on the disc, addi- When labeling CD-R and CD-RW discs, always use a • tional material can be recorded. The packaging of CD-R soft oil-based felt-tipped pen to write the information. discs will in
ページ12に含まれる内容の要旨
2 − S 2 − Se et tt ti in ng u g up a p an nd b d bas asi ic k c kn no ow wl le ed dg ge e Setting up the 2488neo First, find a flat level surface for the 2488neo which is Plug in and turn on the 2488neo. The power switch is on stable and cannot be jogged or jolted easily. the rear, by the power cord. This should be a hard surface. Do not put the 2488neo on a carpet or furnishings, as this will block the airflow and possibly cause overheating. You should avoid moving the 2488neo while it is sw
ページ13に含まれる内容の要旨
2 − Setting up and basic knowledge Shutdown You should always use the SHUT DOWN key before turn- 2 Press the YES/ENTER key. ing off the 2488neo. The HD indicator (orange) flashes as data is written to the hard disk (the display also shows this process). The 2488neo contains a hard disk which is used to store your song data. If you simply turn off the unit using the power switch, there may be some data in the 2488neo’s memory which hasn’t been written to disk and you will therefore lose tha
ページ14に含まれる内容の要旨
2 − Setting up and basic knowledge 2 Turn the JOG/DATA dial until the DISK item is The partition list appears on the screen. The open highlighted, and then press the YES/ENTER key. space in each partition appears on the right. The DISK menu appears. 4 Use the JOG/DATA dial until the partition you wish to use is highlighted, and then press the YES/ENTER key. 3 Use the JOG/DATA dial until the SELECT item is The partition is now selected. highlighted, and then press the YES/ENTER key. Songs W
ページ15に含まれる内容の要旨
2 − Setting up and basic knowledge Channel section (page 20) Direct access screens • ª Sub mixer section (page 18) • The keys listed below are keys dedicated to various func- Stereo bus section (page 18) • tions and many allow direct access to related screens. Mixdown and Mastering section (page 21) • Some of these keys, however, do not have dedicated Effects section (page 18) • screens for editing. Please see the related section for each Utility section (page 19) • function for detail
ページ16に含まれる内容の要旨
2 − Setting up and basic knowledge SHIFT key Many keys have two functions: the first is written in nor- mal (white) type, and the second is written under this in white on a green background. To access these second shifted functions: 1 Press the SHIFT key so that the indicator lights. 2 Press the key whose second function you want to use. The SHIFT indicator goes out. NOTE As the 2488neo is shipped from the factory, if you press the SHIFT key and do not press another key within a second or so
ページ17に含まれる内容の要旨
3 − N 3 − Na am me es a s an nd f d fu un nc ct ti io on ns o s of t f th he 2 e 24 48 88 8n ne eo o Top panel Input channel section Controls for the 8 input channels (A–H). Input signals can To assign an input channel to a track channel or the sub • be assigned to the track mixer or sub mixer. mixer (see “Inputs and assignments” on page 29 and “Sub mixer” on page 35). 1 PHANTOM switch To assign effects to an input (see “Assigning mic • Turns phantom power for the XLR input jacks on input
ページ18に含まれる内容の要旨
3 − Names and functions of the 2488neo Effects section These 3 keys access effect functions. See “6–Effects” on 6 MICX4 key page 39 for details. Press this key to open the MIC EFFECT screen. To assign a mic effect to an input or mixer channel, 5 MULTI (TUNER) key press and hold down this key and then press the INPUT Press this key to open the MULTI EFFECT screen. or SELECT key of the desired channel. To assign the multi-effect to an input or mixer channel, Press this key and the MULTI (
ページ19に含まれる内容の要旨
3 − Names and functions of the 2488neo Monitor Section These controls adjust the output signal sent to the mono monitoring (the monitor source indicator flashes). PHONES output jack on the front panel and the MONITOR Press the unshifted MONITOR SOURCE (MONO) key OUTPUT jack on the rear panel. See “Monitoring” on page again to return to stereo monitoring. 36 for details. o MUTE key This key mutes and unmutes the MONITOR OUT u MONITOR LEVEL knob Adjusts the level of the output signal. signal
ページ20に含まれる内容の要旨
3 − Names and functions of the 2488neo Channel section Opens screens for setting mixer channel functions. n FADER/PAN key Press this key to open the FADER/PAN screen of the v EQ key currently selected channel (input channel or track chan- Press this key to open the EQ screen of the currently nel). See “Fader/pan” on page 32. selected channel (input channel, track channel or stereo bus). See “Digital pad/gain” / “EQ” on page 31 and m SOLO key/indicator “Stereo EQ” on page 33. Press this k
