ページ1に含まれる内容の要旨
® ®
XR 684/XR 684+
Stereo Powered Mixer
OWNER’S MANUAL
ページ2に含まれる内容の要旨
Intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: Risk of electrical shock — DO NOT OPEN! CAUTION: To reduce the risk of electric shock, do not remove cover. No user serviceable parts inside.
ページ3に含まれる内容の要旨
ENGLISH ™ XR 684/684+ Powered Sound Reinforcement Mixing Console General Description: ™ Congratulations on your purchase of the XR 684/684+ powered mixer. Within one compact unit, we have packed feature after feature, each displaying the latest technology available. Both the XR 684 and the XR 684+ are covered in this guide. The two units share the same preamp functions. They are different only in the power amp as noted below. Throughout this manual, the term “XR 684” will refer to both units un
ページ4に含まれる内容の要旨
CHANNEL SECTION: CHANNELS 1-4 1. MIC INPUT: XLR balanced, low-impedance channel input optimized for a microphone or other low-level source. Pin 2 is the positive input. Because of the wide range of gain adjustment, signal levels as high as +10 dBV (2.45 V RMS) 9 can be accommodated. When the phantom power is enabled, this connector has +48 V on pins 2 and 3 with pin 1 as the ground reference. (The Mic Input can also be found on channels 5 through 8.) 8 2. HI-Z/LINE INPUT: 1/4" balanced TRS hig
ページ5に含まれる内容の要旨
NOTE: Channels 5-9 contain features that differ from the previous channels. Only those features are mentioned below. For information on features not 11 mentioned please refer to the section for Channels 1-4. CHANNELS 5-6 10. LINE: 1/4" balanced TRS input for line level signals. This signal is connected through a 25 dB pad to the mic input below it. 11. LOW CUT: This is a low-cut filter with a corner frequency of 80 Hz used to filter rumble, wind noise, breath thumps, stage noise, and other lo
ページ6に含まれる内容の要旨
17. PRESET: Selects the effect preset from the list below. EFX Presets PRESET NAME TIME/SIZE COLOR/TONE 1 Chamber Time: 150 to 5,000 ms Damping (High Frequency) 2 Plate Time: 100 to 4,000 ms Damping (High Frequency) 3 Room Time: 150 to 5,000 ms Damping (High Frequency) 4 Cathedral Time: 100 to 8,000 ms Damping (High Frequency) 5 Spring Time: 150 to 5,000 ms Damping (High Frequency) 6 Gate Time: 150 to 500 ms Damping (High Frequency) 7 Reverse Time: 150 to 500 ms Damping (High Frequency) 8 Delay
ページ7に含まれる内容の要旨
17 18 19 20 21 16 33 22 23 25 24 22 26 23 27 28 29 30 31 32 26. MAIN LEVEL: This is the master level control for the main mix sent to the Left/Mono and Right output jacks. This control sets the Main level going to the power amp when in Main/Monitor mode (see System Mode #24). A good starting position for this control is the center detent position (12:00). 27. PHANTOM POWER SWITCH: Applies 48 V DC voltage to all input XLR connectors to power micro- phones that require it. CAUTION! When phantom
ページ8に含まれる内容の要旨
30. LEFT/MONO OUTPUT: This 1/4" jack provides an output from the Left Main mix to supply external amp/speaker combinations. The level of this signal is determined by the Main Level control. When no plug is connected to the Right Output (#31) then the right signal is mixed with the left, and both can be accessed at the Left/Mono Output. This works well when you use the internal amps for monitor and external amps for Main. Only one patch cord is required to get the Main out to the external amp. 3
ページ9に含まれる内容の要旨
9 ® XR 684 BLOCK DIAGRAM CHANNELS 1-4 TONE CONTROL Effect Defeat LO MIDHI HI-Z INPUT MIC PREAMP EFX LEVEL Stereo PAD Digital +48V PHANTON Effects CHANNEL GAIN LO-Z INPUT Effects to Main Time Color MONITOR SEND Effects Peak Selector LED CHANNELS 5-6 TONE CONTROL LO M I D HI MIC PREAMP LINE INPUT Effects to EFX LEVEL PAD Monitor +48V PHANTON CHANNEL GAIN Tape Out LO-Z INPUT MONITOR SEND Left/Mono Main Output TONE CONTROL CHANNELS 7-8 Mode Select LO M I D HI STEREO LINE INPUT Left Power Amp Input
ページ10に含まれる内容の要旨
10 ® XR 684 LEVEL DIAGRAM ® XR 684 LEVELS +30 MONITOR OUT LEFT & RIGHT OUT +22 dBu MAX +22 dBu MAX +21 dBu INPUTS +20 EQ TAPE OUT GRAPHIC EQ +13.5 dBu +10 dBV MAX +15 dB +12 dB +10 TO POWER AMPS + 2 dBu NOMINAL 2 dBu = 0 dBV HI-Z 0 dBu LINE/TAPE (W/PAD) -10 dBV NOM. LO-Z MIC -12 dB (W/PAD) -11 dBu -10 -15 dB -12.5 dBu -20 LO-Z MIC -30 -28 dBu (NO PAD) -35 dBu -40 HI-Z MIC -50 (NO PAD) -60 dBu -60
ページ11に含まれる内容の要旨
® XR 684 IN - LEFT/RIGHT MODE ® XR 684 In - Left/Right Mode Mains - Left Mains - Right ™ ™ Impulse 200 Impulse 200 Left/Monitor Outputs (Rear) Right/Main Outputs (Rear) Mode Switch Out ® Reactor Tape Player Out ™ PVM 22 ™ MAQ 150 Tape Player In Wireless Hi-Z Mic Mic/Gtr L R Stereo Voice Module ™ SP 112M Keyboard 11
ページ12に含まれる内容の要旨
® XR 684 IN - MONITOR/MAIN MODE ® XR 684 In - Monitor/Main Mode Mains ™ Monitors Impulse 200 ™ SP 112M Left/Monitor Outputs (Rear) Right/Main Outputs (Rear) Mode Switch Depressed (In) ® Reactor Tape Player Out ™ PVM 22 Tape Player In Wireless Hi-Z Mic Mic/Gtr L R Stereo Voice Module Keyboard 12
ページ13に含まれる内容の要旨
™ XR 684 SPECIFICATIONS: Input Specifications: Function Input Z Input Gains Input Levels Bal/ Connector (ohms) control Min** Nominal* Max UnBal. Min setting Lo-Z 2 k Max w/o pad -60 dBu -30 dBu -11 dBu Bal. XLR: Pin 1 Gnd, (150 ohms) (50 dB) Pin 2 (+), Pin 3 (-) Channel 1-8 Max. w/pad -35 dBu -5 dBu +13.5 dBu (25 dB) Hi-Z 100 k Max w/o pad -60 dBu -30 dBu -12 dBu Bal. 1/4" TRS: Tip (+), (50 dB) Ring (-), Sleeve Ground Channel 1-4 Max w/pad
ページ14に含まれる内容の要旨
Frequency Response: Mic Input to L - R Output 20 Hz — 20 kHz +0 dB/-1 dB Line Input to L - R Output 20 Hz — 20 kHz +0 dB/-1 dB To Power Amplifier Output 20 Hz — 20 kHz +0 dB/-1 dB Total Harmonic Distortion (THD): < 0.01% 20 Hz — 20 kHz mic input to L/R mon. output at nominal level (20 Hz — 80 kHz BW) < 0.01% 20 Hz — 20 kHz line input to L/R output at output at nominal level (20 Hz — 80 kHz BW) < .005% Typical at 1 kHz Graphic Equalizer: Filter Bandwidth 1 octave Filter Frequencies 63, 125, 250,
ページ15に含まれる内容の要旨
XR 684/400 SC AMPLIFIER SPECIFICATIONS POWER SECTION Hum and Noise: ™ (400 SC Module with DDT ) -97 dB below 210 watts Frequency Response: Damping Factor: +0, -1 dB, 20 Hz — 20 kHz @ rated power Greater than 100 @ 1 kHz, 4 ohms Rated Power: Input Sensitivity: 210 watts RMS into 4 ohms, both channels 1.5 V RMS for 210 watts @ 4 ohms driven 150 watts RMS into 8 ohms, both channels Input Impedance: driven 2 k ohms Bridge out 420 watts into 8 ohms* *8 ohms minimum load for bridge output onl
ページ16に含まれる内容の要旨
PEAVEY ELECTRONICS CORPORATION LIMITED WARRANTY Effective Date: July 1, 1998 What This Warranty Covers Your Peavey Warranty covers defects in material and workmanship in Peavey products purchased and serviced in the U.S.A. and Canada. What This Warranty Does Not Cover The Warranty does not cover: (1) damage caused by accident, misuse, abuse, improper installation or operation, rental, product modification or neglect; (2) damage occurring during shipment; (3) damage caused by repair or service pe
ページ17に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric products, basic cautions should always be followed. including the following. 1. Read all safety and operating instructions before using this product. 2. All safety and operating instructions should be retained for future reference. 3. Obey all cautions in the operating instructions and on the back of the unit. 4. All operating instructions should be followed. 5. This product should not be used near water, i.e., a bathtub, sink, swimmin
ページ18に含まれる内容の要旨
Features and specifications subject to change without notice. Peavey Electronics Corporation 711 A Street Meridian MS 39301 (601) 483-5365 FAX (601) 486-1278 www.peavey.com ©2000 Printed in the U.S.A. 2/00
