ページ1に含まれる内容の要旨
Vol.1
Operating Instructions
Digital AV Mixer
Model No. AG-HMX100P
Model No. AG-HMX100E
1
Volume
Note that Operating Instructions Vol. 1 describes basic
operations of the digital AV mixer.
For instructions on advanced operations of the digital
AV mixer, refer to Operating Instructions Vol. 2 (pdf file)
contained in the supplied CD-ROM.
Before operating this product, please read the instructions carefully and save this manual for future use.
ENGLISH
SS0810RI0 -PS D
Printed in Japan VQT2U23
ページ2に含まれる内容の要旨
Read this first! (For AG-HMX100P) CAUTION: The mains plug of the power supply cord shall remain readily operable. The AC receptacle (mains socket outlet) shall be installed near the equipment and shall be easily accessible. To completely disconnect this equipment from the AC mains, disconnect the mains plug from the AC receptacle. CAUTION: In order to maintain adequate ventilation, do not install or place this unit in a bookcase, built-in cabinet or any other confined space. To prevent r
ページ3に含まれる内容の要旨
Read this first! (For AG-HMX100P) (continued) IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
ページ4に含まれる内容の要旨
Read this first! (For AG-HMX100P) (continued) FCC NOTICE (U.S.A.) Declaration of Conformity Model Number: AG-HMX100P Trade Name: Panasonic Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ07094 Support contact: 1-800-524-1448 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interf
ページ5に含まれる内容の要旨
Read this first! (For AG-HMX100E) WARNING: CAUTION: This equipment must be earthed. The mains plug of the power supply cord shall To ensure safe operation, the three-pin plug remain readily operable. must be inserted only into a standard three-pin The AC receptacle (mains socket outlet) shall be power point which is effectively earthed through installed near the equipment and shall be easily normal household wiring. accessible. Extension cords used with the equipment must To completely di
ページ6に含まれる内容の要旨
Read this first! (For AG-HMX100E) (continued) Caution for AC Mains Lead FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. This product is equipped with 2 types of AC mains cable. One is for continental Europe, etc. and the other one is only for U.K. Appropriate mains cable must be used in each local area, since the other type of mains cable is not suitable. FOR CONTINENTAL EUROPE, ETC. FOR U.K. ONLY Not to be used in the U.K. FOR U.K. ONLY This appliance is supplied with a moulded thr
ページ7に含まれる内容の要旨
Read this first! (For AG-HMX100E) (continued) EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS 1. Applicable standards and operating environment (AG-HMX100E) The apparatus is compliant with: • standards EN55103-1 and EN55103-2 1996.11, and • electr omagnetic environments E1, E2, E3 and E4 2. Pre-requisite conditions to achieving compliance with the above standards <1> Peripheral equipment to be connected to the apparatus and special connecting cables • The purchaser/user is urged to use only
ページ8に含まれる内容の要旨
Contents Volume 1 (This Book) Setting the Bus [BUS] ............................................... 27 Requests on Use ....................................9 Setting Audio Channels [AUDIO CH] ...................... 27 Setting the Audio Faders [AUDIO FADER] ............... 27 [INT VIDEO] Menu (Internal Video Setting) Screen .. 28 OVERVIEW.............................................10 Setting the Back Matte [BACK MATTE] .................... 29 Features ............................................
ページ9に含まれる内容の要旨
Requests on Use Do not use this equipment near radio transmitters or high-voltage equipment or do not generate static electricity to this equipment as it may adversely affect the recorded images, sound, operation, LED (indication), and the like. Keep this equipment away from equipment that generates magnetic fields or electromagnetic waves. The powerful magnetic fields generated by speakers or large motors may adversely affect the recorded images and/or sound. The liquid crystal parts are hi
ページ10に含まれる内容の要旨
Overview OVERVIEW Panasonic AG-HMX100P/HMX100E is an HD/SD-compatible digital Audio Visual mixer equipped with the essential functions of video switchers, digital video effectors, and audio mixers. Features Video switching/combining effects Video can be processed with wipe, mix, chroma key, luminance key, and digital video effect (DVE) combinations as well as downstream key (DSK) and fade functions. Various digital effects Desired effects can be added to video including still, strobe, negative
ページ11に含まれる内容の要旨
Overview AV Mixer Functions The following shows the operation examples for video production with the AV mixer functions. Basic Operation (see “Operation Applied Operation (see the pdf manual in the Manual Volume ”) CD-ROM, “Operation Manual Volume ”) 1 2 Configuring a system ( page 16) Starting the unit ( page 19) Setup ( page 19) • Setting the startup mode ( page 22) • Changing direct patterns ( page 23) Operating environment setting ( page Vol.2-26) • Setting video and audio inp
ページ12に含まれる内容の要旨
Overview Accessories Power cable ×1 for AG-HMX100P, ×2 for AG-HMX100E CD-ROM ×1 NOTE • Be sure to appropriately dispose of the packing material when you have unpacked the product. • Consult your supplier regarding purchase of accessories. 12
ページ13に含まれる内容の要旨
Overview Components and Functions Operation Panel (Front) 1 2 3 4 56 7 8 9 10 1112 13 14 POWER X / Y P / P B R POS. X 128 Y 220 Z 127 EVENT ME TIME PATTERN INT 09 E 04:25 F 0016 WHT PHONES TIME ASPECT Z TRANSITION MIN MAX H V MODIFY OFF PROJECTOR/ SCENE ME PATTERN DSK FADE REMOTE ON HOLD CENTER GRABBER PATTERN WIDTH COLOR EDGE HARD 32 WHITE EFFECTS OFF PATTERN 7 8 9 ONE DSK REVERSE WAY EFFECTS CONTRAST 4 5 6 LUM CHROMA EXT P in P KEY KEY KEY 1 2 3 INT DSK AUDIO INT PLAY CANCEL VIDEO FADE EFF
ページ14に含まれる内容の要旨
Overview 1 • . (period) key* ( pages 32, Vol.2-21) 27 PATTERN area ( pages 23, 34, 36, Vol.2-6, Vol.2-7) (1) (2) (3) (4) • SHIFT ke y ( pages 27, 28, 30, 32, 33, Vol.2-4, Vol.2-9, Vol.2-10, Vol.2-13, Vol.2-15) PATTERN ONE DSK 2 REVERSE WAY EFFECTS • (confirm) key* LUM CHROMA EXT P in P KEY KEY KEY 15 MASTER fader ( page 33) MIX 16 MIC fader ( page 27, 28, 33) 17 AUX fader ( page 27, 28, 33) 18 SOURCE 1/5, 2/6, 3/7, 4/8 faders ( page 27) (9) (8) (7) (6) (5) 19 AUDIO EFFECTS execution
ページ15に含まれる内容の要旨
Overview Connector Area (Rear) For devices and signals which can be connected to NOTE each connector, see “System Configuration Examples” • For the DVI-I IN connector and DVI-D IN connectors, shielded ( page 16) and “Example Connections with 3D Camera” DVI cables with noise suppression core are recommended. ( pages Vol.2-22 to 24). • For transmitting HD-SDI signals via the SDI IN 1 to 4 connectors and SDI OUT connectors, cables equivalent or superior to the 5C-FB or 5C-FW cable are r
ページ16に含まれる内容の要旨
Basic Operation Basic Operation This chapter describes the initial setup operation for video processing and audio mixing, and the operation of selecting video and audio sources, and setting the basic video switching effects. System Configuration Examples This unit can be connected to video equipment including cameras, P2 devices and VTRs to digitally process video and sound input sources. The following shows the connection examples of this unit with external equipment in three types of system
ページ17に含まれる内容の要旨
Basic Operation HD Video Processing System Advanced 1 reference signal* Signal generator Loop- System camera through Program output Professional-use Preview output G/L external SDI (video and 1 camera sync signal* audio) input ADV-REF G/L Multi- SDI output Professional-use AG-HMX100P/HMX100E view Professional-use camera output monitor SDI IN 1 SDI OUT PGM SDI IN 2 SDI OUT PVW SDI SDI IN 3 SDI OUT MULTI VIEW (video and AUX output SDI OUT AUX audio) input Program output SDI IN 4 Termi- nati
ページ18に含まれる内容の要旨
Basic Operation System with External Controller For using an external controller, it is necessary to perform the following operations in advance: • Enter this unit to remote mode using the [RS-232C] submenu of the [SETUP] menu ( page Vol.2-29). • Press the PROJECTOR/REMOTE button to turn on to activate RS-232C control. External controller Advanced 1 reference signal* Signal generator System camera Loop- through Program output G/L external Professional-use 1 Preview output sync signal* cam
ページ19に含まれる内容の要旨
Basic Operation Power-On Use the supplied power cord to connect this unit to an AC power source. 1 Press the POWER button. 2 To specify the initial state of the unit when it is restarted Use the [MODE] submenu of the [SETUP] menu to set the startup mode ( page 22). Preset mode: The last settings are restored when the unit is restarted. The factory default setting is this mode. Reset mode: The factory default settings are restored when the unit is restarted. However, some settings remain in t
ページ20に含まれる内容の要旨
Basic Operation Setting Screen When setting up this unit or adjusting functions, you need to check the current settings on the LCD screen. The following shows the basic configuration of the setting screen. 1 2 3 POS. X 128 Y 128 Z 196 FAN STOP EVENT ME TIME PATTERN INT 00 E 2:00 F 3044 WHT VIDEO EFFECTS CH A MOSAIC SIZE OFF XY 0 DEFOCUS LEVEL OFF 0 MONO OFF 4 5 6 1 Joystick, rotary Z control settings, and 3D display NOTE area The “FAN STOP” error message is also displayed on the Shows th
