ページ1に含まれる内容の要旨
4-410-136-41(1)
Getting Started
Blu-ray Disc™ /
Playback
DVD Player
Settings and Adjustments
Operating Instructions
Additional Information
BDP-S190
ページ2に含まれる内容の要旨
WARNING Precautions To reduce the risk of fire or electric shock, do not This equipment has been tested and found to expose this apparatus to rain or moisture. comply with the limits set out in the EMC Directive using a connection cable shorter To avoid electrical shock, do not open the cabinet. than 3 metres. Refer servicing to qualified personnel only. On placement The AC power cord (mains lead) must be changed � Place the player in a location with adequate only at a qualified service sh
ページ3に含まれる内容の要旨
by checking their shapes. Make sure the On power sources connector is not upside down or tilted. � The player is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the player itself has been turned off. � Disconnect the player from the wall outlet if you are not going to use the player for a long time. To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord. � Be sure to disconnect the HDMI cable when
ページ4に含まれる内容の要旨
AACS may adopt or change its restriction � MPEG Layer-3 audio coding technology rules after the time of purchase. and patents licensed from Fraunhofer IIS and Thomson. Cinavia Notice � This product incorporates proprietary This product uses Cinavia technology to limit technology under license from Verance the use of unauthorized copies of some Corporation and is protected by U.S. Patent commercially-produced film and videos and 7,369,677 and other U.S. and worldwide their soundtracks. W
ページ5に含まれる内容の要旨
Table of Contents WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Getting Started Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Step 1: Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Step 2: Connecting the Player . . . . . . . . . . . . . . . . . . . . . . . . .
ページ6に含まれる内容の要旨
® �Opera Browser from Opera Software ASA. Copyright 1995-2010 Opera Software ASA. All rights reserved. � All other trademarks are trademarks of their respective owners. � Other system and product names are generally trademarks or registered trademarks of the manufacturers. ™ and ® marks are not indicated in this document. 6
ページ7に含まれる内容の要旨
Getting Started Getting Started Guide to Parts and Controls Front panel z The N button has a tactile dot. Use the tactile dot as a reference when operating the player. A Disc tray To lock the disc tray (Child Lock) You can lock the disc tray to avoid B Z (open/close) accidental opening of the tray. C N (play) While the player is turned on, hold down D x (stop) the N button on the player for more than 10 seconds to lock or unlock the E Power indicator tray. F [/1 (on/standby) Turns on the pla
ページ8に含まれる内容の要旨
Rear panel DIGITAL OUT PCM/DTS/ COAXIAL DOLBY DIGITAL VIDEO R AUDIO L LINE OUT HDMI OUT LAN(100) A LINE OUT (VIDEO) jack D HDMI OUT jack B DIGITAL OUT (COAXIAL) jack E LINE OUT (R-AUDIO-L) jacks C LAN (100) terminal 8
ページ9に含まれる内容の要旨
Getting Started A Z (open/close) Remote Opens or closes the disc tray. -TV- t (TV input select) The available functions of the remote are Switches between TV and other different depending on the disc or the input sources. situation. -TV- [/1 (TV on/standby) Turns on the TV, or sets to standby mode. [/1 (on/standby) Turns on the player, or sets to standby mode. B Number buttons (0 - 9) Enters the title/chapter numbers, etc. 2 (volume) +/– AUDIO SUBTITLE Adjusts the TV volume. AUDIO (page 21)
ページ10に含まれる内容の要旨
HOME SEN (page 16) Enters the player’s home menu. Accesses the “Sony Entertainment Displays the wall paper when Network™” online service. pressed on the category icon of the home menu. Home menu display RETURN Returns to the previous display. The home menu appears when you press (previous/ne
ページ11に含まれる内容の要旨
Getting Started Step 2: Connecting the Player Do not connect the AC power cord (mains lead) until you have made all the connections. Connecting to your TV Select one of the following connection methods according to the input jacks on your TV. Match the colour of the plug to that of the jack when connecting. DIGITAL OUT PCM/DTS/ COAXIAL DOLBY DIGITAL VIDEO R AUDIO L LINE OUT HDMI OUT LAN(100) High quality High Speed HDMI Cable (supplied) Audio/video cable (not supplied) Standard quality b Do
ページ12に含まれる内容の要旨
Connecting to your AV amplifier (receiver) Select one of the following connection methods according to the input jacks on your AV amplifier (receiver). When you select A or B, make the appropriate settings in the [Audio Settings] setup (page 20). DIGITAL OUT PCM/DTS/ COAXIAL DOLBY DIGITAL VIDEO R AUDIO L LINE OUT HDMI OUT LAN(100) High Speed HDMI Cable (supplied) High Speed HDMI Cable (not supplied) t Set [BD Audio MIX Setting] (page 20). Coaxial digital cable (not supplied) DIGITAL OUT PCM/
ページ13に含まれる内容の要旨
Getting Started *1 Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the Step 4: Easy Setup double-D symbol are trademarks of Dolby Laboratories. *2 Manufactured under license under U.S. When turned on for the first time Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; Wait for a short while before the 7,333,929; 7,392,195; 7,272,567 & other player turns on and starts [Easy U.S. and worldwide patents issued & Initial Settings]. pending. DTS-HD,
ページ14に含まれる内容の要旨
4 Turn on the TV and set the input selector on your TV. This will show the signal from the player on your TV screen. 5 Perform [Easy Initial Settings]. Follow the on-screen instructions to make the basic settings using
ページ15に含まれる内容の要旨
Playback Enjoying BONUSVIEW/ Playback BD-LIVE Playing a Disc Some BD-ROMs with the “BD-LIVE” logo* have bonus contents and other For playable discs, see page 27. data that can be downloaded for your enjoyment. 1 Switch the input selector on your * TV so that the signal from the player appears on your TV screen. 1 Connect a USB memory to the USB jack on the player (page 7). 2 Press Z, and place a disc on the Use a 1 GB or larger USB memory disc tray. as your local storage. 2 Prepare for B
ページ16に含まれる内容の要旨
Displaying the play Playing from a USB information Device You can view the playback information, For “Playable types of files”, see etc., by pressing DISPLAY. page 28. The displayed information differs depending on the disc type and player 1 Connect the USB device to the status. USB jack on the player (page 7). Refer to the instruction manual Example: when playing a BD-ROM supplied with the USB device before connecting. 2Select [Video], [Music], or [Photo] on the home menu using
ページ17に含まれる内容の要旨
Playback 1 Connect the player to a network (page 13). Available Options 2 Press SEN button on the remote. Various settings and playback operations are available by pressing 3 Select an Internet content and a OPTIONS. The available items differ variety of on-demand depending on the situation. entertainment using
ページ18に含まれる内容の要旨
x [Audio]: Switches the language track when multilingual tracks are recorded on BD-ROMs/DVD VIDEOs. Selects the sound track on CDs. x [Subtitle]: Switches the subtitle language when multilingual subtitles are recorded on BD-ROMs/DVD VIDEOs. x [Angle]: Switches to other viewing angles when multi-angles are recorded on BD-ROMs/DVD VIDEOs. x [IP Content Noise Reduction]: Adjusts the picture quality of Internet contents. [Music] only x [Add Slideshow BGM]: Registers music files in the US
ページ19に含まれる内容の要旨
Settings and Adjustments [4:3]: Select this when connecting to a 4:3 screen TV without a wide mode Settings and Adjustments function. x [Screen Format] Using the Settings [Full]: Select this when connecting to a Displays TV with a wide mode function. Displays a 4:3 screen picture in 16:9 aspect ratio Select [Setup] on the home menu even on a wide-screen TV. when you need to change the settings of [Normal]: Changes the picture size to fit the player. the screen size with the original pi
ページ20に含まれる内容の要旨
[Off]: Select this when the picture is x [Output Video Format] unstable or colours appear unnatural. [HDMI]: Normally select [Auto]. Select [Original Resolution] to output the x [Pause Mode] resolution recorded on the disc. When [Auto]: Normally select this. Dynamic the resolution is lower than the SD moving pictures appear without blurring. resolution, it is scaled up to the SD [Frame]: Displays static pictures at high resolution. resolution. [Video]: Automatically sets the lowest reso
