ページ1に含まれる内容の要旨
User Manual
EURORACK PRO RX1202FX
Premium 12-Input Mic/Line Rack Mixer with
XENYX Mic Preamplifiers, British EQ's and Multi-FX Processor
ページ2に含まれる内容の要旨
2 EURORACK PRO RX1202FX User Manual Table of Contents Thank you ....................................................................... 2 Important Safety Instructions ...................................... 3 Legal Disclaimer ............................................................. 3 Limited Warranty ........................................................... 3 1. Introduction ............................................................... 5 1.1 General mixing console functions .........
ページ3に含まれる内容の要旨
3 EURORACK PRO RX1202FX User Manual 9. Do not defeat the safety purpose of the polarized UNDERTAKING OR REPRESENTATION. THIS MANUAL Important Safety or grounding-type plug. A polarized plug has two blades IS COPYRIGHTED. NO PART OF THIS MANUAL MAY Instructions with one wider than the other. A grounding-type plug BE REPRODUCED OR TRANSMITTED IN ANY FORM has two blades and a third grounding prong. The wide OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, blade or the third prong are provided for yo
ページ4に含まれる内容の要旨
4 EURORACK PRO RX1202FX User Manual “Support” at behringer. com. If your country is not • connection or operation of the unit in any way (3) This warranty does not detract from the seller’s listed, please check if your problem can be dealt with that does not comply with the technical or safety obligations in regard to any lack of conformity of the by our “Online Support” which may also be found under regulations applicable in the country where the product and any hidden defect. “Support” at b
ページ5に含まれる内容の要旨
5 EURORACK PRO RX1202FX User Manual 1. Introduction 1.1 General mixing console functions With 8 phantom-powered microphone inputs as well as 4 high-headroom line A mixing console fulfils three main functions: inputs, the RX1202FX comprises a total of 12 channels. All channels come with • Signal processing: 60-mm faders and the extremely musical 2-band EQ, the clip LEDs, as well as the 2 aux sends enable an uncompromising functionality of the console. Preamplification An integrated power s
ページ6に含まれる内容の要旨
6 EURORACK PRO RX1202FX User Manual 1.2 The user’s manual 1.3.3 Online registration The user’s manual is designed to give you both an overview of the controls, Please register your new BEHRINGER equipment right after your purchase as well as detailed information on how to use them. In order to help you by visiting http://behringer.com and read the terms and conditions of our understand the links between the controls, we have arranged them in groups warranty carefully. according to their fun
ページ7に含まれる内容の要旨
7 EURORACK PRO RX1202FX User Manual LINE IN The MON path—as the name already implies—is meant to be used as monitor signal path. For this application, it is important that the controller works as Each mono input also features a balanced line input on a 1/4" connector. pre-fader, which means it does not rely on the fader position. For this reason the Unbalanced devices (mono connectors) can also be connected to these inputs. AUX send path is unsuitable for the connection to effects devices
ページ8に含まれる内容の要旨
8 EURORACK PRO RX1202FX User Manual TRIM MAIN OUT The controller works the same as the one for the mono channels. The MAIN OUT connectors are balanced and laid out as XLR However, the level control range is limited from +20 to -20 dBu connectors. Here the summed signal of the main mix has a level of because the stereo channels only process line signals. 0 dBu. According to the way you want to use the mixer and which equipment you have, following devices can be connected: HIGH/LOW Live PA syst
ページ9に含まれる内容の要旨
9 EURORACK PRO RX1202FX User Manual ◊ When the connected effects device does not receive an input signal, POWER none of the FX controllers are probably turned up, which also applies The blue POWER LED indicates that the console is powered on. to the integrated effects -processor. ◊ Adjust your external effects processor to 100% wet (effects signal LEVEL INDICATOR only), because the effects signal is added to the main mix along with The 4-segment display accurately displays the relevant signal
ページ10に含まれる内容の要旨
10 EURORACK PRO RX1202FX User Manual CD/TAPE TO MIX 2.6 Voltage supply, phantom power supply and fuse When the CD/TAPE TO MIX switch is pressed, the CD/tape input is assigned to the main mix providing an additional input for tape machines, MIDI instruments FUSE HOLDER/IEC MAINS RECEPTACLE or other signal sources that do not require any processing. The mains connection is made via a cable with an IEC mains connector and 2.5 Digital effects processor meets the required safety standards. An
ページ11に含まれる内容の要旨
11 EURORACK PRO RX1202FX User Manual 3. Applications 3.1 Recording studio TRUTH B200A Keyboard MIDI sound module HPS3000 B-2 Pro MD Recorder HPS3000 V-Amp 3 Laptop F-Control FCA202 Mini Amp Amp 800 Electric Guitar Fig. 3.1: The RX1202FX in a recording studio Even though most of the tasks in a studio can nowadays be accomplished using Record and playback: a computer, a mixing console remains an unavoidable piece of equipment that The recording signal is preamplified in a mixer’s channel, proce
ページ12に含まれる内容の要旨
12 EURORACK PRO RX1202FX User Manual 3.2 Live sound VP1520 Keyboard Electric Guitar VIRTUE VT250FX Drum Machine EP2000 COMPOSER PRO-XL MDX2600 HPS3000 CD Player MD Recorder XM8500 EP2000 VIRTUALIZER 3D FX2000 BX4500H EUROLIVE F1220A Electric Bass BB410 Fig. 3.2: Live application of the RX1202FX
ページ13に含まれる内容の要旨
13 EURORACK PRO RX1202FX User Manual This illustration shows a typical arrangement for a live setup. Two vocal microphones and the line outputs of a guitar and a bass amplifier are connected 1 to the mono channels of the RX1202FX. A keyboard and a drum computer are 2 2 1 3 3 connected to the stereo channels. The power amplifier in your sound system is connected to the main outputs; equipment such as compressors, equalizers or output input crossovers are located between the mixer and the amp
ページ14に含まれる内容の要旨
14 EURORACK PRO RX1202FX User Manual 5. Specifications Mono Inputs Outputs MIC (IMP Invisible Mic Preamp) AUX SENDS (FX) Type XLR, electr. balanced Type 1/4 " TRS connector, impedance balanced Mic E.I.N. (20 Hz – 20 kHz) Impedance approx. 240 Ω balanced approx. 120 Ω unbalanced @ 0 Ω source resistance -132 dB / -134 dB A-weighted Max. output level +22 dBu @ 50 Ω source resistance -130 dB / -132 dB A-weighted @ 150 Ω source resistance -128 dB / -130 dB A-weighted Aux Sends (MON) Frequency resp
ページ15に含まれる内容の要旨
15 EURORACK PRO RX1202FX User Manual 1 Main Mix System Data Noise Main mix @ -∞, -98 dB / -101 dB A-weighted Channel fader -∞ Main mix @ 0 dB, -85 dB / -88 dB A-weighted Channel fader -∞ Main mix @ 0 dB, -77 dB / -80 dB A-weighted Channel fader @ 0 dB 2 Fade Attenuation (Crosstalk attenuation) Main fader closed 90 dB Channel fader closed 90 dB Frequency Response Microphone input to Main Out <20 Hz – 105 kHz +1 dB / -1 dB <10 Hz – 170 kHz +3 dB / -3 dB Effects Section Converter 24-bit Sigm
ページ16に含まれる内容の要旨
17 EURORACK PRO RX1202FX User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION EURORACK PRO RX1202FX Responsible Party Name: MUSIC Group Services US Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.: Phone: +1 425 672 0816 Fax: +1 425 673 7647 EURORACK PRO RX1202FX complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuan
ページ17に含まれる内容の要旨
We Hear You
