ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Introduction....................................................................................................................... 4 Features.............................................................................................................................. 4 Minimum Requirements .................................................................................................. 4 Package Content.........................................................................................
ページ3に含まれる内容の要旨
2.5 QoS ............................................................................................................................. 57 2.6 NAT ............................................................................................................................ 60 2.6.1 Port Forwarding..................................................................................................... 62 2.6.2 Virtual Server..............................................................................
ページ4に含まれる内容の要旨
Introduction Congratulations on purchasing the Hawking Technology Hi-Gain Wireless-108G MIMO Router. This Hi-Gain Wireless-108G MIMO Router is a cost-effective, powerful solution for sharing your broadband internet connection wirelessly or wired. The router features the latest in wireless technology to ensure the greatest distance and performance within your network. Features • High Internet Access throughput (108Mbps) • AMP MIMO Technology for superior wireless performance • Allo
ページ5に含まれる内容の要旨
when you use this function in the first time, especially your ISP charges you based on the time used. Getting to know the Hi-Gain Wireless-108G MIMO Router Back Panel The diagram (fig1.0) below shows the Hi-Gain Wireless-108G MIMO Router’s back panel. The router’s back panel is divided into three sections, LAN, Modem and Reset: Figure 1.0 1) Local Area Network (LAN) The Hi-Gain Wireless-108G MIMO Router’s 4 LAN ports are where you connect your Mac PCs, Windows PC’s,
ページ6に含まれる内容の要旨
Front Panel On the router’s front panel there are LED lights that inform you of the router’s current status. Below is an explanation of each LED and its description. LED Light Status Description Power ON Router’s power supply is on Internet ON Broadband Modem is connected Internet LNK/ACT OFF Broadband Modem is not connected Flashing Modem port has Activity (ACT), data being sent LA
ページ7に含まれる内容の要旨
Setup Diagram Figure 1.2 below shows a typical setup for a Local Area Network (LAN). 7
ページ8に含まれる内容の要旨
Getting started With the Setup CD 1) Insert the included Setup CD into your CD-Rom drive. 2) Select the Setup Wizard selection 3) Follow the steps accordingly until your setup is complete Manually without the Setup CD (incase the CD does not work or is lost) This is a step-by-step instruction on how to start using the router and get connected to the Internet. This section will detail the instructions for a manual connection. 1) Setup your network as shown in the setup diagr
ページ9に含まれる内容の要旨
under “Configure IPv4” from the Network menu of your specific network adapter. • Select Manually and enter the correct information in your IP Address fields. • Ensure that your Computer and the Wireless Router are on the same network segment. (If you don't have a router, this must be the case.) Ensure you are using the wired LAN interface. The Wireless interface can only be used if its configuration matches your MAC's wireless settings. Configure your PC to obtain an IP addre
ページ10に含まれる内容の要旨
8: Reboot the PC. Your PC will now obtain an IP address automatically from your Hi-Gain Wireless-108G MIMO Router’s DHCP server. Note: Please make sure that the Hi-Gain Wireless-108G MIMO Router’s DHCP server is the only DHCP server available on your LAN. Once you’ve configured your PC to obtain an IP address automatically, please proceed to Step 3 2b) Windows XP 1: Click the Start button and select Settings, then click Network Connections. The Network
ページ11に含まれる内容の要旨
5: Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your Hi-Gain Wireless-108G MIMO Router’s DHCP server. Note: Please make sure that the Hi-Gain Wireless-108G MIMO Router’s DHCP server is the only DHCP server available on your LAN. Once you’ve configured your PC to obtain an IP address automatically, please proceed to Step 3. 2c) Windows 2000 1: Click the Start button and select Settings, then click Control Panel. The Control Pane
ページ12に含まれる内容の要旨
automatically and Obtain DNS server address automatically as shown on the following screen. 6: Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your Hi-Gain Wireless-108G MIMO Router’s DHCP server. Note: Please make sure that the Hi-Gain Wireless-108G MIMO Router’s DHCP server is the only DHCP server available on your LAN. Once you’ve configured your PC to obtain an IP address automatically, please proceed to Step 3. 2d) Wi
ページ13に含まれる内容の要旨
button to start installing the TCP/IP protocol. You may need your Windows CD to complete the installation. 5: After you install TCP/IP, go back to the Network window. Select TCP/IP from the list of Network Protocols and then click the Properties button. 6: Check each of the tabs and verify the following settings: • IP Address: Select Obtain an IP address from a DHCP server. • DNS: Let all fields are blank. • WINS: Let all fields are blank. • Routing: Let all fields ar
ページ14に含まれる内容の要旨
Setup Continued… 3) Once you have configured your Macs and PCs to obtain an IP address automatically, the router’s DHCP server will automatically give your computers an IP address. By default the Hi- Gain Wireless-108G MIMO Router’s DHCP server is enabled so that you can obtain an IP address automatically. To see if you have obtained an IP address, see Appendix A. Note: Please make sure that the Hi-Gain Wireless-108G MIMO Router’s DHCP server is the only DHCP server available on your
ページ15に含まれる内容の要旨
Status Information (Chapter 3) The Status Information section is for you to monitor the router’s current status information only. Tools (Chapter 4) If you want to Reset the router (because of problems) or save your configurations or upgrade the firmware then the Tools section is the place to do this. Menu Description Quick Setup Wizard (Chapter 1) Select your Internet connection type and then input the configurations needed to connect to your Internet Service Provide
ページ16に含まれる内容の要旨
Internet Connection, Device Status, System Log, Security Log and DHCP client information. Tools (Chapter 4) This section contains the Hi-Gain Wireless-108G MIMO Router’s Tools - Tools include Configuration tools, Firmware upgrade and Reset. Configuration tools allow you to Backup (save), Restore, or Restore to Factory Default configuration for your Hi-Gain Wireless-108G MIMO Router. The Firmware upgrade tool allows you to upgrade your Hi-Gain Wireless- 108G MIMO Router's firmware. Th
ページ17に含まれる内容の要旨
Connecting to the Router from a Mac Computer To connect to a wireless network from your Mac OS based computer do the following: Using a AirPort Card or AirPort Extreme Card 3 options: - Use the AirPort Setup Assistant, Select “Set up your computer to join an existing wireless/AirPort network.” - Mac OS 9 Control strip – Click the AirPort icon and select the network name. It should have a black dot beside it. - Mac OS X 10.1 or later – Choose your network in either the AirPort m
ページ18に含まれる内容の要旨
Chapter 1 Quick Setup The Quick Setup section is designed to get you using the Hi-Gain Wireless-108G MIMO Router as quickly as possible. In the Quick Setup you are required to fill in only the information necessary to access the Internet. Once you click on the Quick Setup Wizard in the HOME page, you should see the screen below. Step 1) Time Zone The Time Zone allows your router to base its time on the settings configured here, this will affect functions such as Log entries and Fire
ページ19に含まれる内容の要旨
Step 2) Broadband Type In this section you have to select one of four types of connections that you will be using to connect your Hi-Gain Wireless-108G MIMO Router’s WAN port to your ISP (see screen below). Note: Different ISP’s require different methods of connecting to the Internet, please check with your ISP as to the type of connection it requires. Menu Description 1.1 Cable Modem Your ISP will automatically give you an IP address 1.2 Fixed-IP xDSL Your ISP has give
ページ20に含まれる内容の要旨
1.1 Cable Modem Choose Cable Modem if your ISP will automatically give you an IP address or if you know your connection uses a coax cable as your internet pipeline (cable-TV cable) Some ISP’s may also require that you fill in additional information such as Host Name and MAC address (see screen below). Note: The Host Name and MAC address section is optional and you can skip this section if your ISP does not require these settings for you to connect to the Internet. Parameters
