ページ1に含まれる内容の要旨
................................................................................................................
SIR-T451
DIGITAL TV SET TOP BOX
Samsung Electronics America inc.
SERVICE DIVISION
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864)
www.samsungusa.com
.............
Owner’s
Instructions
Made under one or more of the following US patents;
6,480,239; 6,243,431; 6,192,090; 6,184,938; 6,133,964; 5,659,372; 5,479,449
MF68-00335A-00
ページ2に含まれる内容の要旨
Warning! Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product
ページ3に含まれる内容の要旨
Thank You for Choosing Samsung Thank you for choosing Samsung! Your new Samsung Digital TV receiver represents the latest in DTV IRD technology. We designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come. Important Safety Information Always be careful when using your product. To reduce the risk of fire, ele
ページ4に含まれる内容の要旨
•Protect the power cord. Power supply cords should be routed so that they won’t be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, conve- nience receptacles, and the point where they exit from the unit. • Unplug the product from the wall outlet and disconnect the antenna or cable system during a lightning storm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-line su
ページ5に含まれる内容の要旨
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference that may cause undesired operation. This television receiver provides display of television closed captioning in accordance with §15.119 of the FCC rules. NOTES This equipment has been tested and found to comply with the limits for a Class B digital device, pur- suant to part 15 of the FCC
ページ6に含まれる内容の要旨
A Guide to Digital TV What is Digital Television? Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set. Using DTV, broadcasters can transmit high definition TV (HDTV) images, Dolby digi- tal surround audio, and new services such as multicasting (transmitting more than one pro- gram on the same TV channel) and datacasting (providing electronic program guides and interactive television). Several of these services can be combined into a single digital br
ページ7に含まれる内容の要旨
How to View Digital Television There are three ways to watch DTV. The first is to use an integrated digital TV; one with a built-in digital television tuner. The second is to connect an external DTV set-top receiver to a DTV-ready television or monitor. This type of TV or monitor will have wideband compo- nent video and stereo audio inputs. You can also watch DTV signals with personal comput- er (PC) tuner cards and computer monitors. 1. Integrated TVs versus DTV-ready TVs and monitors The advan
ページ8に含まれる内容の要旨
Q&A 1. Is the antenna I use for existing TV reception good enough for DTV? Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas. However, DTV broadcast channel assignments are different than analog channels. You should find out whether your local DTV broadcasts are on VHF (channels 2-13) or UHF (channels 14-69) to see if you need a different anten- na. If your DTV channels are on UHF and you already get good UHF reception, y
ページ9に含まれる内容の要旨
Q&A 4. Can I connect my DTV set-top receiver to my cable TV service? Cable TV systems use a different method for transmitting digital TV programs that is current- ly incompatible with broadcast DTV set-top receivers. So you will still need to use an out- door or indoor antenna to receive OTA broadcast DTV programs. The good news is that you won’t have to pay a monthly or per-program charge to watch OTA DTV and HDTV programs. They’re free, unlike subscription satellite TV or premium cable TV. All
ページ10に含まれる内容の要旨
CONTENTS Chapter 1: Connecting the Set Top Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Front Panel Controls and LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Connecting Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Connecting the Set-Top Box to a TV Set . . . . . . . . . . . . . . . . . . . . .14 Connectin
ページ11に含まれる内容の要旨
CHAPTER ONE 1 1 Connecting The Set Top Box Front Panel Controls and LEDs Œ∏ ´Ø ˇ ¨ ˆ Œ Press to turn the power on or off. ˆ MENU Press to display the on-screen menus or to switch back ´ STANDBY to the previous menu screen that was display. Turns your receiver Standby. Ø ENTER ˇ Press to activate a selection when using the on-screen Display the broadcasting status. When the STB detect menus. the broadcasting signal, turn on the light of HDTV logo. ∏ Menu Up/Down/Left/Right ¨ EXIT Use to change ch
ページ12に含まれる内容の要旨
CHAPTER ONE 1 1 Connecting The Set Top Box Rear Panel Jacks Œ ANT./CABLE IN Ô DTV OUT (RGB) Connect the AIR antenna or CATV antenna here. Connect You can connect RGB to a TV, computer monitor, or cable in the event that a local cable provider is passing another video component input. 1080i, 720p, 480p and through 8VSB on their system. 480i are available by setting the RESOLUTION SELECT switch. This output port supports the only SD and HD out- ´ ANT.OUT put. ˇ DOLBY DIGITAL OUT (OPTICAL) DTV
ページ13に含まれる内容の要旨
CHAPTER ONE 1 1 Connecting The Set Top Box Connecting Antennas This section shows how to connect a cable TV with or without a cable box, and how to connect an indoor or outdoor antenna. Indoor/Outdoor Antenna: You may need a 75Ω adaptor or a combiner, as 1 shown in the illustration to the right. Cable TV without a Cable Box: If you have a cable TV and do not use a cable box, 2 connect the cable to ANT/CABLE IN on the rear of the Set-Top Box. Cable TV with a Cable Box: If you have a cable box,
ページ14に含まれる内容の要旨
CHAPTER ONE 1 1 Connecting The Set Top Box Connecting the Set-Top Box to a TV Set Plasma Display Panel (PDP) Connect an antenna cable to the ANT/CABLE IN jacks on the Set-Top Box. 1 Connect the Video Cables. 2 YPbPr format: Connect a Component video cable between the DTV OUT(COM- PONENT) jacks on the Set-Top Box and the DTV INPUT jacks on the PDP. RGB format: Connect an RGB video moni- tor cable between the DTV OUT (RGB) jack on the Set-Top Box and the RGB VIDEO IN jack on the PDP. Connect the
ページ15に含まれる内容の要旨
CHAPTER ONE 1 1 Connecting The Set Top Box Digital Ready TV or Normal TV Connect an antenna cable to the ANT/CABLE IN jacks on the SetTop Box. 1 Connect the Video Cables. 2 Digital Ready TV: Connect a compo- nent video cable between the DTV OUT COMPONENT (Y,Pb,Pr) jacks on the Set- Top Box and the DTV INPUT jacks on the TV. Normal TV: Connect a video cable between the VIDEO OUT jack on the Set- Top Box and the VIDEO INPUT jack on the TV. Or, connect an S-Video cable between th
ページ16に含まれる内容の要旨
CHAPTER ONE 1 1 Connecting The Set Top Box Connecting the Set-Top Box to a Device with a DVI jack Connect a DVI cable between the DVI OUT jack on the Set-Top Box 1 and the DVI IN jack on the DVI device (TV, monitor). Connect audio cables between the Lt/Rt AUDIO OUT jacks on the Set-Top Box 2 and the L/R AUDIO IN jacks on the DVI device. NOTES This Set-Top Box supports HDCP technology. HDCP stands for High-bandwidth Digital Content • Protection, which provides secure data transmission for hi
ページ17に含まれる内容の要旨
CHAPTER ONE 1 1 Connecting The Set Top Box Connecting the Set-Top Box to a Computer Monitor Connect an antenna cable to the ANT/CABLE IN jacks on the Set-Top Box. 1 Connect a computer video monitor cable between the DTV OUT (RGB) jack 2 on the Set-Top Box and the VIDEO IN jack on the computer monitor. Connect an audio cable between the Lt/Rt AUDIO OUT jacks on the Set-Top 3 Box and the L/R AUDIO IN jacks on the computer monitor. NOTE b r You must set “DTV OUT SELECT (Y P P /RGB,DVI)” for RGB
ページ18に含まれる内容の要旨
CHAPTER TWO 2 2 Remote Control and On-Screen Menus Reviewing the Remote Control The Set-Top Box remote control and on-screen menu system work together to operate the Set-Top Box as simply as possible. Understanding the remote control buttons and the menus allows you to operate the Set-Top Box with ease. If you need some assistance while using the remote control and the menus, the provided on-screen help feature will be helpful. See “Using the On-screen Help” on page 22. Œ Press to turn the powe
ページ19に含まれる内容の要旨
CHAPTER TWO 2 2 Remote Control and On-Screen Menus Ô PRE-CH Press to return to the revious channel you viewed. INFO. Press to display information about the current box settings and program: Channel number, Time, Program title, Program duration, Caption, Rating control, Digital picture grade, and MTS language. Press to return to the revious channel you viewed. Ò Channel , (Channel Up and Down) Press to change channels. Ú Back Press to return to the previous menu. Æ EXIT Press to completely ex
ページ20に含まれる内容の要旨
CHAPTER TWO 2 2 Remote Control and On-Screen Menus Installing the Batteries Press and remove the battery cover on the back of the remote control. Put two AAA batteries into the compartment and replace the battery cover. ➡➡ Programming the Remote Control To program the remote control to operate a TV, see “Programming the Remote Control for Other Components” (page 46). 20
