ページ1に含まれる内容の要旨
Instruction Manual
DVD-V9500
www.samsung.com
ページ2に含まれる内容の要旨
SAFETY INSTRUCTIONS Safety Instructions This symbol is intended to alert the user to the presence of CAUTION uninsulated “dangerous voltage” within the product’s RISK OF ELECTRIC SHOCK enclosure that may be of sufficient magnitude to constitute a DO NOT OPEN risk of fire or electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC This symbol is intended to alert the user to the presence of SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. important operating and
ページ3に含まれる内容の要旨
BEFORE YOU START Before you start Accessories Remote Control Batteries-2EA Video/Audio Cable Antenna Cable User’s Guide Registration HDMI Cable (AK59-00039F) 1.5V(AAA) (AC97-01746A) (AC39-42001J) Card (AC43-12002H) Install Batteries in the Remote Control 1 Open the battery cover on the back of the remote control. 2 Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly. 3 Replace the battery cover. If the remote control doesn’t operate properly: Check the pola
ページ4に含まれる内容の要旨
TABLE OF CONTENTS Table of Contents Safety Instructions ........................................................................................................................................2 Important Safety Instructions ................................................................................................................2 Before you start ............................................................................................................................................3 Acc
ページ5に含まれる内容の要旨
TABLE OF CONTENTS Chapter 4: DVD Operations Playing a Disc ..............................................................................................................................................31 Using the Search and Skip Functions ........................................................................................................33 Using the Display Function ..........................................................................................................................34 U
ページ6に含まれる内容の要旨
Chapter 1 SETUP Note General Features This product incorporates copyright protection technology that is protected by U.S. patents and DVD-VCR Features other intellectual property rights. Use of this copyright protection technology must be authorized by Perfect compatibility to play back DVDs, audio Macrovision, and is intended for home and other CDs or VHS Tapes. limited viewing uses only unless otherwise authorized Enjoy a DVD movie while recording a TV show by Macrovision. Reverse engineer
ページ7に含まれる内容の要旨
SETUP Disc Type and Characteristics This DVD-VCR is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) Recording Types Disc Size Max. Playing Time Characteristics - DVD contains excellent sound Single-sided 240 min. DVD 5” and video due to Dolby Digital Double-sided 480 min. Audio and MPEG-2 system. + - Various screen and audio Video Single-sided 80 min. 3 1/2” functions can be easily selected Double-sided 160 min. through the on-screen menu. AUDIO-C
ページ8に含まれる内容の要旨
SETUP Description Front Panel Controls Œ Œ ´ ´ ˇ ˇ ¨ ¨ ˆ ˆ Ø Ø ∏ ∏ ’ ’ ˝ ˝ Ô Ô ” ” Ò Ò 1 DISC TRAY 10 P.SCAN Place the disc here. Press to select component video out progressive scan mode. 2 OPEN/CLOSE Press to open and close the disc tray. 11 EZ VIEW The aspect ratio of a picture can easily be 3 VCR Deck adjusted to your TV's screen size. Insert a standard VHS video tape. 12 CHANNEL and 4 DVD/VCR Press to change channels. Press to view DVD or VCR mode. 5 EJECT Press to eject a video tape i
ページ9に含まれる内容の要旨
SETUP Rear Panel Œ Œ ´ ´ ˇ ˇ ¨ ¨ ˆ ˆ Ø Ø ∏ ∏ ” ” ’ ’ 1 RF IN (FROM ANT.) 5. HDMI OUT JACK Connect the RF Antenna cable to your DVD-VCR. - Use the HDMI cable to connect this jack to the HDMI jack on your television for the best 2 LINE IN 1 (VIDEO/AUDIO) quality picture. Connect to the Video/Audio output jack of your - If an HDMI cable is connected to an HDMI- external device. compatible TV, HDMI will be output automatically within 10 seconds. 3 AUDIO OUT - If
ページ10に含まれる内容の要旨
SETUP Tour of the Remote Control 1 POWER button 16 OPEN/CLOSE button Turns the DVD-VCR’s 17 SHUTTLE ( / ) buttons power on and off. Use to play a sequence at 2 NUMBER buttons variable speeds. (VCR) Œ Œ ı ı 18 TV/VCR button 3 100+ button Use to switch between TV 4 DVD button and VCR mode. Use to operate DVD. ´ ´ 19 TV button ˜ ˜ Use to operate TV. 5 VCR button Use to operate VCR. 20 F.ADV/SKIP/INPUT SEL. ˇ ˇ ¯ ¯ button 6 AUDIO/TV MUTE button Use to advance play one Use this to access various ¨
ページ11に含まれる内容の要旨
Chapter 2 CONNECTIONS Connecting the Antenna Cable There are several ways to connect your DVD-VCR. Select one of the following antenna connections that best suits you below. Method 1: Antenna + DVD-VCR + TV: No Cable box Method 2: Antenna + Cable box + DVD-VCR +TV: Cable box with many scrambled channels Method 3: Antenna + DVD-VCR + Cable box +TV: Cable box with a few scrambled channels - If you are using an off-air antenna that has 300-ohm twin flat leads, use an external antenna connecto
ページ12に含まれる内容の要旨
CONNECTIONS Method2: Antenna + DVD-VCR + TV: Cable box with many scrambled channels Wall You can record channels by selecting the channel on the cable box. You cannot record one channel while watching another channel. Be sure that the Cable Box cable box is turned on. To RF IN To RF OUT Antenna cable To Antenna Input Method3: Antenna + DVD-VCR + TV: Cable box with a few scrambled channels Wall You can record non-scrambled channels by selecting the channel on the cable box. You cannot record scr
ページ13に含まれる内容の要旨
CONNECTIONS Before Connecting the DVD-VCR - Always turn off the DVD-VCR, TV, and other components before you connect or disconnect any cables. - Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components. Connection to a TV The following shows examples of connections commonly used to connect the DVD-VCR with a TV and other components. Connection to a TV (Video) 1 Using video/audio cables, connect the VIDEO (yellow
ページ14に含まれる内容の要旨
CONNECTIONS Connection to a TV (S-Video) - Connecting to your TV using an S-Video cable. - You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C) signals to present clearer images than regular video input mode. (Audio signals are delivered through the audio output.) 1 Using an S-Video cable (not included), connect the S-VIDEO OUT terminal on the rear of the DVD-VCR to the S-VIDEO IN terminal of your TV. 2 Using the audio cables, connect the
ページ15に含まれる内容の要旨
CONNECTIONS Connection to a TV (Interlace) - Connecting to your TV using Component video cables. - You will enjoy high quality and accurate color reproduction images. Component video separates the picture B R element into black and white(Y), blue(P ), red(P ) signals to present clear and clean images. (Audio signals are delivered through the audio output.) 1 Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD-VCR to the COMPONENT IN termin
ページ16に含まれる内容の要旨
CONNECTIONS Connection to a TV (Progressive) 1 Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD-VCR to the COMPONENT IN terminal of your TV. 2 Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD-VCR to the AUDIO (red and white) IN terminals of your TV. Blue White Turn on the DVD-VCR and TV. Red Red Green Component Cable Audio Cable (not included) 3 Red Blue Green With the unit in stop mode, se
ページ17に含まれる内容の要旨
CONNECTIONS Connecting to a TV with HDMI Jack 1 Using the HDMI-HDMI cable connect the HDMI OUT terminal on the rear of the DVD player to the HDMI IN terminal of your TV. 2 Press the input selector on your TV remote control until the HDMI signal from the DVD player appears on your TV screen. HDMI cable HDMI VIDEO Specifications When you press the HD button on the front panel, 480p, 720p, 1080i are selected in order. The first press of the HD button on the front panel brings up the current resolut
ページ18に含まれる内容の要旨
CONNECTIONS • HDMI (High Definition Multimedia Interface) HDMI is an interface to enable the digital transmission of video and audio data with just a single connector. Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack. • HDMI connection description HDMI connector - Both uncompressed video data and digital audio data (LPCM or Bit Stream data). - Though the player uses a HDMI cable, the player outputs only a pure di
ページ19に含まれる内容の要旨
CONNECTIONS Connection to an Audio System Connection to an Audio System (2 Channel Amplifier) 1 Using the audio cables, connect the (LINE) AUDIO (red and white) OUT terminals on the rear of the DVD-VCR to the AUDIO (red and white) IN terminals of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO, S-VIDEO or COMPONENT OUT terminals on the rear of the DVD-VCR to the VIDEO, S-VIDEO or COMPONENT IN terminal of your TV as described on pages 14 to 16. White Red Audio Cable 3 Turn
ページ20に含まれる内容の要旨
CONNECTIONS Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier) 1 Using a coaxial or an optical cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) or DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the DVD-VCR to the DIGITAL AUDIO IN (COAXIAL) or DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO, S-VIDEO or COMPONENT OUT terminals on the rear of the DVD-VCR to the VIDEO, S-VIDEO or COMPONENT IN terminal of
